Valid

JB/T 8540-2013Steam jet vacuum pumps (English PDF)

水蒸气喷射真空泵

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8540-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 8540-2013 is the English-translated version of 水蒸气喷射真空泵.

JB/T 8540-2013 is a recommended Chinese machinery industry standard covering steam jet vacuum pumps. It sets the way the basic type is designated and the basic rules for design, manufacture, inspection and acceptance, along with the requirements for signs, packaging and transport and the methods used in performance testing.

JB/T 8540-2013 replaces the 2004 edition of JB/T 8540. Among the standards it quotes are GB 150.1-2011, GB 151-1999, GB/T 985.1-2008, GB/T 15386-1994, GB/T 2624.1-2006 and JB/T 3223-1996.

The pump is filed under the Chinese classification J78 and the international classification 23.160.

Found what you need?

Document preview — JB/T 8540-2013

National Standard of the People's Republic of China

ICS
23.160
Replacing
JB/T 8540-2004

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 8540-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

It replaces the earlier edition JB/T 8540-2004, JB/T 8540-1997.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard covering steam jet vacuum pumps. It sets the way the basic type is designated and the basic rules for design, manufacture, inspection and acceptance, along with the requirements for signs, packaging and transport and the methods used in performance testing. JB/T 8540-2013 replaces the 2004 edition of JB/T 8540. Among the standards it quotes are GB 150.1-2011, GB 151-1999, GB/T 985.1-2008, GB/T 15386-1994, GB/T 2624.1-2006 and JB/T 3223-1996. The pump is filed under the Chinese classification J78 and the international classification 23.160.

JB/T 8540-2013 falls under ICS 23.160, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB 150.1-2011 — Pressure vessels—Part 1:General requirements

GB 150.2-2011 — Pressure Vessels-Part 2: Materials

GB 150.3-2011 — Pressure Vessels -Part3: Design

GB 150.4-2011 — Pressure Vessels --Part 4: Fabrication, inspection and testing, and acceptance

GB 151-1999 — Tubular heat exchangers [including MODIFICATION 1]

GB/T 985.1-2008 — Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding

GB/T 13306-2011 — Plates

GB/T 15386-1994 — Air cooled heat exchanger

GB 16409-1996 — Plate heat exchanger

GB/T 19001-2008 — [Replaced by GB/T 19001-2016] Quality management systems - Requirements [including MODIFICATION 1]

GB/T 2624.1-2006 — Full differential pressure device installed in a pipe of circular cross-section measuring fluid flow -- Part 1: General principles and requirements

GB/T 2624.2-2006 — Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates

GB/T 2624.3-2006 — Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles

GB/T 2624.4-2006 — Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes

JB/T 3223-1996 — Rules for quality management of welding materials

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 20 pages

5 Related standards

Other editions:

JB/T 8540-2004 (earlier edition)

JB/T 8540-1997 (earlier edition)

Standards on related subjects:

GB/T 10894-2023 — Determination method of separation machinery noise

JB/T 4333.2-2013 — Recessed plate filter press & plate and frame filter press - Part 2: Technical specifications

JB/T 8947-2008 — Rubber belts for fixed chamber belt vacuum filters

JB/T 6446-2025 — Vacuum valve

JB/T 8944-2019 — Single stage rotary vane vacuum pumps

JB/T 1246-2019 — Vacuum technology - Rotary piston vacuum pumps

6 Classification and status

International classification (ICS): 23.160

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 8540

EditionTitleRevisionStatus
JB/T 8540-2013Steam jet vacuum pumpscurrent editionCurrent
JB/T 8540-2004Steam jet vacuum pumpsprevious editionSuperseded

This page sells the current edition, JB/T 8540-2013. Earlier editions are listed for reference only.

How to Download JB/T 8540-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8540-2013

$660.00