GB/T 26137-2010Thermodynamic performance testing for blast furnace gas energy recovery turbo-expander (English PDF)
高炉煤气能量回收透平膨胀机热力性能试验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26137-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
July 1, 2011
Scope
GB/T 26137-2010 is the English-translated version of 高炉煤气能量回收透平膨胀机热力性能试验.
GB/T 26137-2010 is the Chinese standard "Thermodynamic performance testing for blast furnace gas energy recovery turbo-expander". Its scope clause reads: This standard specifies the test methods for blast furnace gas energy recovery turbo-expander (hereinafter referred to as the expander) Thermal Performance Test.
Gas, nitric acid and other exhaust energy recovery turbo-expander thermal performance test may refer to this standard. Its clauses include symbols; test equipment and instruments; test rule; test conditions stable; calculate test results; test report. It was issued on 2011-01-14.
Found what you need?
Document preview — GB/T 26137-2010
National Standard of the People's Republic of China
- ICS
- 23.140
- Classification
- J 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Symbols
- 4 Test equipment and instruments
- 4.1 Test apparatus
- 4.2 Test line
- 4.3 Flow Measurement
- 4.4 Measuring Instruments
- 4.5 Power Measurement
- 5 Test Rule
- 5.1 Measurements
- 5.2 Performance test conditions
- 5.3 Speed Test
- 5.4 Flow Measurement
- 5.5 gas density is determined
- 5.6 Pressure Measurement
- 5.7 Temperature Measurement
- 5.8 Power Measurement
- 6 test conditions stable
- 7 calculate test results
- 7.1 Performance Computing
- 7.2 Performance Conversion
- 8 Test Report
- Appendix A (informative) thermodynamic calculations
Foreword
The standard proposed by China Machinery Industry Federation.
1 Scope
This standard specifies the test methods for blast furnace gas energy recovery turbo-expander (hereinafter referred to as the expander) Thermal Performance Test.
Gas, nitric acid and other exhaust energy recovery turbo-expander thermal performance test may refer to this standard.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1236 Industrial fans using standardized airways performance test (GB/T 1236-2000, idt ISO 5801:1997)
GB/T 2624.1 with the differential pressure measuring device mounted to round pipe full pipe fluid flow - Part 1: General principles and Requirements (GB/T 2624.1-2006, ISO 5167-1:2003, IDT)
GB/T 2624.2 with the differential pressure measuring device mounted to round pipe full pipe fluid flow - Part 2: Orifice (GB/T 2624.2-2006, ISO 5167-2:2003, IDT)
GB/T 2624.3 with the differential pressure measuring device mounted to round pipe full pipe fluid flow Part 3: Nozzles and Venturi Nozzle (GB/T 2624.3-2006, ISO 5167-3:2003, IDT)
GB/T 2624.4 with the differential pressure measuring device mounted to round pipe full pipe fluid flow - Part 4: Venturi tubes (GB/T 2624.4-2006, ISO 5167-4:2003, IDT)
JB/T 3165 centrifugal and axial blowers and compressors Thermal Performance Test
3 Symbols
Standard symbols and instructions specified in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1236Industrial fan -- Performance testing using standardized airways
- GB/T 2624.1Full differential pressure device installed in a pipe of circular cross-section measuring fluid flow -- Part 1: General principles and requirements
- GB/T 2624.2Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates
- GB/T 2624.3Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
- GB/T 2624.4Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes
- JB/T 3165Thermodynamic performance tests of centrifugal and axial blowers and compressors
Similar standards
How to Download GB/T 26137-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1236-2017 — Industrial fan -- Performance testing using standardized airways
GB/T 2624.1-2006 — Full differential pressure device installed in a pipe of circular cross-section measuring fluid flow -- Part 1: General principles and requirements
GB/T 2624.2-2006 — Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates
Secure payment via Stripe
Payments accepted
GB/T 26137-2010
$225.00