GB/T 2861.7-2008Guide unit for stamping dies - Part 7: Guide pillars with taper lead for sliding guide (English PDF)
冲模导向装置 第7部分：滑动导向可卸导柱
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 2861.7-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 10, 2008
Implementation date
October 1, 2008
Scope
GB/T 2861.7-2008 is the English-translated version of 冲模导向装置 第7部分：滑动导向可卸导柱.
GB/T 2861.7-2008 is the Chinese standard "Guide unit for stamping dies - Part 7: Guide pillars with taper lead for sliding guide". Its scope clause reads: This section provides a guide sliding guide die removable guide post structure, dimensions and marking.
This section applies to the die guide slide guide removable guide post. Its clauses include dimensions.
Found what you need?
Document preview — GB/T 2861.7-2008
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Classification
- J 46
- Replacing
- GB/T 2861.12-1990
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This section provides a guide sliding guide die removable guide post structure, dimensions and marking.
This section applies to the die guide slide guide removable guide post.
2 Normative references
The following documents contain provisions which, through reference to GB/T 2861 to the present, constitute provisions of this section. For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section
Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T in the 70.1 hexagon socket head cap screws
GB/T 2861.9 die guide Part 9. bush
GB/T Part 10 2861.10 die guides. washer
JB/T 8070 die mold parts and technical conditions
JB/T 8071 to check the accuracy of the die mold
3 Dimensions
Removable guide posts slide guide structure and dimensions shown in Figure 1, Table 1.
Un surface roughness R Rao 6.3µm.
allowed to remain a center hole.
b C-type center hole.
Figure 1 slide guide removable guide post […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 2861.7
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 2861.7-2008 | Guide unit for stamping dies - Part 7: Guide pillars with taper lead for sliding guide | current edition | Current |
| GB/T 2861.12-1990 | Guide unit for stamping dies - Part 7: Guide pillars with taper lead for sliding guide | previous edition | Superseded |
This page sells the current edition, GB/T 2861.7-2008. Earlier editions are listed for reference only.
How to Download GB/T 2861.7-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2861.8-2008 — Guide unit for stamping dies - Part 8: Guide pillars with taper lead for ball-bearing
GB/T 2861.6-2008 — Guide unit for stamping dies - Part 6: Cylindrical helical compression springs
GB/T 2861.9-2008 — Guide unit for stamping dies - Part 9: Bushings
Secure payment via Stripe
Payments accepted
GB/T 2861.7-2008
$165.00