GB/T 2889.6-2020Plain bearings - Terms, definitions, classification and symbols - Part 6: Abbreviated terms (English PDF)

1 Scope

This part of GB/T 2889 provides common abbreviations and their original terms related to sliding bearings.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

ISO 4378-1 Plain bearing terms, definitions, classifications and symbols Part 1.Structure, bearing material and its performance

ISO 4378-2 Plain bearing terms, definitions, classifications and symbols Part 2.Friction and wear

ISO 4378-3 Plain bearing terms, definitions, classifications and symbols Part 3.Lubrication

ISO 4378-4 Plain Bearing Terms, Definitions, Classification and Symbols Part 4.Basic Symbols

ISO 4378-5 Plain bearing terms, definitions, classifications and symbols Part 5.Application of symbols

3 Abbreviations

The terms, definitions and symbols defined by ISO 4378-1, ISO 4378-2, ISO 4378-3, ISO 4378-4, ISO 4378-5 apply to this file.

Each abbreviation is an abbreviation of a term or phrase related to sliding bearing. Usually (but not all) take one of the words or phrases

One or a group of letters.

The following acronyms do not list all relevant acronyms. If necessary, it may be expanded. Abbreviations in Roman alphabet order

Sequence arrangement.

AAS. Atomic Absorption Spectrometry

AE. audio emission inspection

AES. Auger Electron Spectroscopy

ATF. Automatic transmission fluid

AW. Anti-wear performance

BEM. boundary element method

BS. Backscatter

CCS. Cold start simulator

CFD. Computational Fluid Dynamics

CIP. compact interpolation curve method

CA. Average midline

CMA. Cylindrical lens analyzer

CRT. Cathode Ray Tube

CRV. spool resistance value

CVD. chemical vapor deposition

DDP. zinc dialkyl dithiophosphate

DL. Direct lubrication

DLC. Diamond-like Carbon

DSC. Differential Scanning Calorimetry

DTGA. Differential Thermogravimetric Analysis

EDX, EDXA. Energy dispersive X-ray analysis

EDTA. ethylenediaminetetraacetic acid

EELS. electron energy loss spectroscopy

EHD, EHL. Elastohydrodynamic lubrication

EM. Electron probe

EP. Ultimate pressure

EPMA. Electron Probe Microscopic Analysis

FDM. Finite Difference Method

FEM. Finite Element Method

FFM. Friction Force Microscope

FIM. Electric Field Ion Microscopy

FL. oil immersion lubrication

FMEA. Failure Mode and Impact Analysis

FTA. Fault Tree Analysis Method

FT-IR. Fourier transform infrared spectroscopy

FVM. Finite Volume Method

G. casting

GS. Raw sand

GC. continuous casting

GM. Permanent mold

GZ. Centrifugal casting

HL. hydrodynamic lubrication

HRTEM. High resolution transmission electron microscope

ICP. inductively coupled plasma spectrometry

IR. infrared absorption spectrometry

ISS. Particle Scattering Spectrometry

LBP. load between tiles

LEED. low energy electron diffraction

LIF. Laser-induced fluorescence

LOP. Load on tile

MD. Metal Dithiophosphate

MFR. Melt mass flow rate

MHD. Electromagnetic Fluid Power

MOC. mutual overlap coefficient

MOP, MOFP. Maximum oil film pressure

MOFT. minimum oil film thickness

NMR. Nuclear Magnetic Resonance

NRRO. Non-repeatable leak

P. Sintering

PA. Polyamide (nylon)

PAI. Polyamide-imide

PAO. Poly alpha-olefin

PBT. Polybutylene terephthalate

PCTFE. Polychlorotrifluoroethylene

PE. Polyethylene

PFAE. Perfluoroalkyl polyester

PEEK. Polyetheretherketone

PET. Polyethylene terephthalate

PI. Polyimide

PMOFP. Maximum peak oil film pressure

POFP. Peak oil film pressure

PP. Polypropylene

PPS. polyphenylene sulfide

PTFE. Polytetrafluoroethylene

PU. Polyurethane/Polyurethane

PV. PV value

PVA. Peak and valley average value, polyvinyl alcohol

PVC. polyvinyl chloride

PVD. physical vapor deposition

PVDF. polyvinylidene fluoride

RF. radio frequency

RHEED. reflected high-energy electron diffraction

RRO. Repeatable leak

RT. room temperature

SAM. Scanning Auger Electron Microscope

SEM. Scanning Electron Microscope

SFA. Surface Force Device

SIMS. Secondary Ion Mass Spectrometry

SOAP. oil spectrum analysis program

SPC. Statistical Process Control

SPM. Scanning Probe Microscope

STM. Scanning Tunneling Microscope

TAN. total acid value

TBN. Total Base Number

TCP. toluene phosphate

TEHD, TEHL. thermoelastic fluid dynamic pressure lubrication

TEM. Transmission Electron Microscope

THD, THL. Thermal fluid dynamic pressure lubrication

TLC. Thin Layer Chromatography

TML. total mass loss

ToF-SIMS. Time of Flight-Secondary Ion Mass Spectrometry

TPJB. Tilting pad radial bearing

TPTB. Tilting pad thrust bearing

VI. viscosity index

XAS. X-ray absorption spectroscopy

XPS. X-ray photoelectron spectroscopy

ZDDP, ZnDTP. zinc dialkyl or diaryl dithiophosphate […]