GB/T 3903.18-2008Footwear -- Test methods for uppers -- High temperature behaviour (English PDF)
鞋类 帮面试验方法 高温性能
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3903.18-2008 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Recommended
Issue date
June 18, 2008
Implementation date
May 1, 2009
Scope
GB/T 3903.18-2008 is the English-translated version of 鞋类 帮面试验方法 高温性能.
GB/T 3903.18-2008 — This Part of GB/T 3903 specifies a test method for determining the effect of heat on the tensile strength of uppers or complete upper assembly, in order to assess the suitability for the end use. This Part is applicable to uppers irrespective of the material.
Found what you need?
Document preview — GB/T 3903.18-2008
National Standard of the People's Republic of China
- ICS
- 61.060
- Classification
- Y 78
Issued by: General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword...3
- 1 Scope...4
- 2 Normative references...4
- 3 Terms and definitions...4
- 4 Apparatus and material...5
- 5 Sampling and conditioning...6
- 6 Test method...6
- 7 Expression of results...6
- 8 Test report...7
Foreword
This Part of GB/T 3903 identically adopts the International Standard ISO
17703.2003 Footwear - Test methods for uppers - High temperature behaviour
(English version). They are exactly identical in technical content. This Part of
GB/T 3903 only makes the following editorial modifications.
a) modified "this European Standard" to "this Part of GB/T 3903" (Translator
Note. Original text in Chinese is European Standard);
b) used decimal point "." to replace "," which was used as decimal point;
c) deleted the foreword of ISO 17703.2003;
d) deleted the table of contents of ISO 17703.2003;
e) directly used a national standard as reference which is corresponding to
EN 12222, an EN standard that was used as reference in ISO
17703.2003;
f) modified prEN 13522 to ISO 17706 in Clause 2 of this Part because EN
13522 has been officially published of which the standard number is EN
13522.2001; the corresponding International standard number is ISO
17706.2003;
g) deleted appendix of ISO 17703.2003;
h) deleted bibliography of ISO 17703.2003.
This Part was proposed by China Light Industry Association.
This Part shall be under the jurisdiction of National Technical Committee on
Footwear of Standardization Administration of China.
The drafting organizations of this Part. China Institute of Leather and Footwear
Industry, Putian Entry - Exit Inspection and Quarantine Bureau of People's
Republic of China.
Main drafters of this Part. Zhang Weijuan, Yan Hongwei, Tian Wang, Lin Wei,
Tang Zhenhua, Fu Yizhong.
Footwear - Test methods for uppers –
High temperature behaviour
1 Scope
This Part of GB/T 3903 specifies a test method for determining the effect of heat
on the tensile strength of uppers or complete upper assembly, in order to assess
the suitability for the end use.
This Part is applicable to uppers irrespective of the material.
2 Normative references
The following standards contain the provisions which, through reference in this
Part of GB/T 3903, constitute the provisions of this Part. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Part. However, the parties who enter into agreement based on this Part are
encouraged to investigate whether the latest versions of these documents are
applicable. For undated reference documents, the latest versions apply to this
Part.
GB/T 22049 Footwear - Standard atmospheres for conditioning and testing
of footwear and components for footwear (GB/T 22049-2008, ISO
18454.2001, IDT);
ISO 17706 Footwear - Test methods for uppers - Tensile strength and
elongation
3 Terms and definitions
For the purposes of this Part of GB/T 3903, the following terms and definitions
apply.
3.1
high temperature behaviour
resistance of a material to elevated temperatures as measured by the effect on
the tensile properties of the material. Particularly applicable to materials used
in vulcanised footwear
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 3903.18-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 22049-2019 — Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
GB/T 3903.1-2017 — Footwear - Test methods for whole shoe - Flexing resistance
GB/T 3903.10-2005 — Footwear -- Test methods for insoles -- Dimensional stability
Secure payment via Stripe
Payments accepted
GB/T 3903.18-2008
$55.00