GB/T 3884.17-2014Methods for chemical analysis of copper concentrates - Part 17: Determination of aluminium oxide content - Chromazurol S spectrophotometric method and fluoride salts device-Na2EDTA titrimetric method (English PDF)
铜精矿化学分析方法 第17部分:三氧化二铝量的测定 铬天青S胶束增溶光度法和沉淀分离-氟盐置换-Na2EDTA滴定法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3884.17-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 5, 2014
Implementation date
August 1, 2015
Scope
GB/T 3884.17-2014 is the English-translated version of 铜精矿化学分析方法 第17部分:三氧化二铝量的测定 铬天青S胶束增溶光度法和沉淀分离-氟盐置换-Na2EDTA滴定法.
GB/T 3884.17-2014 is the Chinese standard "Methods for chemical analysis of copper concentrates - Part 17: Determination of aluminium oxide content - Chromazurol S spectrophotometric method and fluoride salts device-Na2EDTA titrimetric method".
Its scope clause reads: GB/T 3884 This section specifies the method for determination of copper concentrate in aluminum oxide content. This section applies to copper concentrates Determination of aluminum oxide content.
Method for determining the range of 1 to 0.20% to 1.00%; Method 2 Determination of the range of > 1.00% to 5.00%. 2 1 Chromium Azure S micellar solubilization spectrophotometric.
Found what you need?
Document preview — GB/T 3884.17-2014
National Standard of the People's Republic of China
- ICS
- 77.120.60
- Classification
- H 13
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
GB/T 3884 This section specifies the method for determination of copper concentrate in aluminum oxide content.
This section applies to copper concentrates Determination of aluminum oxide content. Method for determining the range of 1 to 0.20% to 1.00%; Method 2
Determination of the range of > 1.00% to 5.00%.
2 1 Chromium Azure S micellar solubilization spectrophotometric
2.1 Method summary
Sample with sodium hydroxide and sodium peroxide melt, melt with the flooding, most of copper, iron, nickel, calcium, magnesium, lead, titanium, etc. to precipitate
Forms is removed by filtration. Respectively thiourea, ascorbic acid masking remnants of copper, iron, vanadium eliminate interference with hydroxylamine hydrochloride at pH 5.8 to 6.3
Acetic acid - ammonium acetate buffer solution, aluminum and CAS S- nonionic surfactant polyethylene glycol octylphenyl ether (emulsifier OP) formed Green
Ternary complex, in the spectrophotometer at a wavelength of 610nm, the absorbance was measured with a 1cm cuvette, calculated using the standard curve method trioxide
Aluminum content.
2.2 Reagents
Unless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity.
2.2.1
sodium peroxide.
2.2.2
sodium hydroxide.
2.2.3
hydrochloric acid (rho = 1.19g/mL).
2.2.4
hydrochloric acid (11).
2.2.5
hydrochloric acid (15).
2.2.6
hydrochloric acid (119).
2.2.7
hydrochloric acid (1119).
2.2.8
ammonia (16).
2.2.9
Ammonia (1139).
2.2.10
Thiourea (30g/L).
2.2.11 ascorbic acid solution (10g/L)
Using now.
2.2.12 hydroxylamine hydrochloride solution (100g/L)
Using now.
2.2.13 chrome azure S solution (1g/L)
Weigh 0.2g Chromium Azure dissolved in 200mL of ethanol (11) in.
2.2.14
polyethylene glycol octylphenyl ether (emulsifier OP) solution (2998).
2.2.15
acetic acid - ammonium acetate buffer solution (pH 6.3). A 485mL solution of ammonium acetate (4mol/L) solution and 15mL acetic acid (4mol/L) mixed (Preparation of a solution of ammonium acetate (4mol/L) should be adjusted to pH 7 in).
2.2.16 thymol blue (thymol blue) solution (1g/L)
Weigh 0.1g of thymol blue (thymol blue) was dissolved in 100mL ethanol […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 3884.17-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3884.18-2023 — Methods for chemical analysis of copper concentrates—Part 18:Determination of arsenic,antimony,bismuth,lead,zinc,nickel,cadmium,cobalt,chromium,aluminum oxide,magnesium oxide and calcium oxide contents—Inductively coupled plasma atomic emission spectrometry
GB/T 3884.16-2025 — Methods for chemical analysis of copper concentrates - Part 16: Determination of silicon dioxide content - Potassium fluosilicate titrimetric method and gravimetric method
GB/T 3884.19-2017 — Methods for chemical analysis of copper concentrates - Part 19: Determination of thallium content - Inductively coupled plasma mass spectrometry
Secure payment via Stripe
Payments accepted
GB/T 3884.17-2014
$145.00