GB/T 3836.33-2021Explosive atmospheres - Part 33: Equipment in adverse service conditions (English PDF)
爆炸性环境 第33部分:严酷工作条件用设备
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 3836.33-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2021
Implementation date
May 1, 2022
Scope
GB/T 3836.33-2021 is the English-translated version of 爆炸性环境 第33部分:严酷工作条件用设备.
GB/T 3836.33-2021 is the Chinese standard "Explosive atmospheres - Part 33: Equipment in adverse service conditions". Its scope clause reads: This document provides guidance for equipment used in explosive atmospheres with an ambient temperature of below -20 °C and other additional adverse conditions (including marine applications).
This document provides recommendations for the design, manufacture and application of this type of equipment. This document is applicable to equipment operating within the range of environmental conditions specified in the explosion-proof certificate.
NOTE: see the classification of climatic conditions in details in GB/T 4796, GB/T 4797 (all parts), GB/T 4798 (all parts) and GB/T 2421. This document is used together with other relevant parts of GB/T 3836.
Found what you need?
Document preview — GB/T 3836.33-2021
National Standard of the People's Republic of China
Issued by: SAMR; SAC
Contents
- Foreword3
- Introduction7
- 1 Scope10
- 2 Normative References10
- 3 Terms and Definitions11
- Atmospheres11
- 5 Equipment Design Recommendations13
- 6 Effects of Low Temperature on Different Explosion-proof Types15
- 7 Selection, Installation and Application of Equipment17
- 8 Equipment Maintenance18
- 9 Classification of Hazardous Areas18
- Appendix A (informative) Recommendations on Materials19
- Appendix C (informative) Solar Radiation22
- Bibliography24
1 Scope
This document provides guidance for equipment used in explosive atmospheres with an ambient temperature of below -20 °C and other additional adverse conditions (including marine applications).
This document provides recommendations for the design, manufacture and application of this type of equipment. This document is applicable to equipment operating within the range of environmental conditions specified in the explosion-proof certificate.
NOTE: see the classification of climatic conditions in details in GB/T 4796, GB/T 4797 (all parts), GB/T 4798 (all parts) and GB/T 2421.
This document is used together with other relevant parts of GB/T 3836.
2 Normative References
The contents of the following documents constitute indispensable clauses of this document through normative references in the text. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 3836.1 Explosive Atmospheres - Part 1: Equipment - General Requirements (GB/T 3836.1-2021, IEC 60079-0:2017, MOD)
GB/T 3836.4 Explosive Atmospheres - Part 4: Equipment Protection by Intrinsic Safety
“i” (GB/T 3836.4-2021, IEC 60079-11:2011, MOD)
GB/T 3836.15 Explosive Atmospheres - Part 15: Electrical Installations Design,
Selection and Erection (GB/T 3836.15-2017, IEC 60079-14:2007, MOD)
GB/T 3836.16 Explosive Atmospheres - Part 16: Electrical Installations Inspection and
Maintenance (GB/T 3836.16-2017, IEC 60079-17:2007, IDT)
GB/T 4208 Degrees of Protection Provided by Enclosure (IP code) (GB/T 4208-2017,
IEC 60529:2013, IDT)
GB/T 4942.1 Degrees of Protection Provided by the Integral Design of Rotating
Electrical Machined (IP code) - Classification (GB/T 4942.1-2006, IEC 60034-5:2000,
IDT)
GB/T 3836.35 | GB/T 3836.31 | GB/T 3836.34 | GB/Z 3836.37 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3836.1Explosive atmospheres - Part 1: Equipment - General requirements
- GB/T 3836.1-2021Explosive atmospheres - Part 1: Equipment - General requirements
- GB/T 3836.4Explosive atmospheres - Part 4: Equipment protection by intrinsic safety 'i'
- GB/T 3836.4-2021Explosive atmospheres - Part 4: Equipment protection by intrinsic safety 'i'
- GB/T 3836.15Explosive atmospheres - Part 15: Electrical installations design, selection and erection
- GB/T 3836.15-2017Explosive atmospheres - Part 15: Electrical installations design, selection and erection
IEC 60079 · IEC 60529 · IEC 60034
How to Download GB/T 3836.33-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3836.1-2021 — Explosive atmospheres - Part 1: Equipment - General requirements
GB/T 3836.15-2017 — Explosive atmospheres - Part 15: Electrical installations design, selection and erection
GB/T 3836.16-2017 — Explosive atmospheres - Part 16: Electrical installations inspection and maintenance
Secure payment via Stripe
Payments accepted
GB/T 3836.33-2021
$270.00