GB/T 3855-2005Test method for resin content of carbon fiber reinforced plastics (English PDF)
碳纤维增强塑料树脂含量试验方法
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3855-2005 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
March 31, 2026
Implementation date
October 1, 2026
Scope
GB/T 3855-2005 is the English-translated version of 碳纤维增强塑料树脂含量试验方法.
GB/T 3855-2005 is the Chinese standard "Test method for resin content of carbon fiber reinforced plastics". It was issued by State Administration for Market Regulation, China National Standardization Administration. Issued on 2026-03-31, in force from 2026-10-01.
Found what you need?
Document preview — GB/T 3855-2005
National Standard of the People's Republic of China
- ICS
- 59.100.20
- Classification
- Q53
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- 1 Scope
- 2 Normative reference
- 3 Principle of method
- 4 Specimen
- 4.1 Specimen mass and thickness
- 5 Test apparatus and reagent
- 6 Test procedure
- 7 Calculation
- 8 Test result
- 9 Test report
1 Foreword
GB/T 3855-2005 was issued by State Administration for Market Regulation, China National Standardization Administration on 31 March 2026 and has been in force since 1 October 2026.
It replaces the earlier edition GB/T 3855-1983.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the specimens, test apparatus and reagents, test procedures, calculations, test results and test reports, etc. in the test of resin content of carbon fiber reinforced plastics. This standard is applicable to carbon fiber reinforced plastics in which sulfuric acid may completely decompose the resin matrix under certain conditions without excessively corroding the fibers.
GB/T 3855-2005 falls under ICS 59.100.20, in the field of textile and leather technology.
This catalogue holds 1,332 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 Normative references
GB/T 1463 — Test methods for density and relative density of fiber reinforced plastics
4 About this standard
Sector: National Standard (Recommended)
Issued by: State Administration for Market Regulation, China National Standardization Administration
English translation: about 12 pages (approximate)
Chinese original: about 18,128 characters
5 Related standards
Other editions:
GB/T 3855-2026 (later edition)
GB/T 3855-1983 (earlier edition)
Standards on related subjects:
GB/T 26749-2022 — Carbon fibre—Determination of tensile properties of resin-impregnated yarn
GB/T 38887-2020 — Spherical graphite
GB/T 30836-2014 — Lithium titanium oxide and its carbon composite anode materials for lithium ion battery
GB/T 47406-2026 — Test method for the volume resistivity of carbon fibre reinforced composites
GB/T 47405-2026 — Test methods for the permeability of carbon fibre reinforcements used in liquid moulding
6 Classification and status
International classification (ICS): 59.100.20
Chinese Standard Classification (CCS): Q 53
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 45467-2025Fiber reinforced polymer composite tubes for confining concrete
- GB/T 45006-2024Composite pultruded plates for wind turbine blades
- GB/T 1458-2023Test method for mechanical properties of ring of filament-winding reinforced composites
- GB/T 16778-2009General procedure of failure analysis for fiber reinforced plastic structural products
How to Download GB/T 3855-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3855-2005
$85.00