GB/T 3852-2017Tapes and dimensions for coupling bores and their connection (English PDF)
联轴器轴孔和联结型式与尺寸
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3852-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2017
Implementation date
December 1, 2017
Scope
GB/T 3852-2017 is the English-translated version of 联轴器轴孔和联结型式与尺寸.
GB/T 3852-2017 is the Chinese standard "Tapes and dimensions for coupling bores and their connection". Its scope clause reads: This standard specifies the type and code of the coupling shaft hole, size and markings and examples.
This standard applies to key-connected cylindrical shaft holes, 1. 10 conical shaft holes and spline-coupled spline hole couplings. Its clauses include normative reference documents; type and code.
Found what you need?
Document preview — GB/T 3852-2017
National Standard of the People's Republic of China
- ICS
- 21.120.20
- Classification
- J 19
- Replacing
- GB/T 3852-2008
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the type and code of the coupling shaft hole, size and markings and examples.
This standard applies to key-connected cylindrical shaft holes, 1. 10 conical shaft holes and spline-coupled spline hole couplings.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Dimensions of GB/T 1095 flat keyway
GB/T 1144 Rectangular spline dimensions, tolerances and tests
GB/T 1184 Shapes and position tolerances Not specified Tolerance values
GB/T 1570 Conical Shaft Extension
GB/T 3478.1 Cylindrical straight teeth involute splines (metric series of teeth) Part 1. General
GB/T 11334 Geometrical product specifications (GPS) Cone tolerance
3 type and code
3.1
Shaft hole type and code in Table 1.
Table 1 Shaft hole type and code
Name Type and Code Icon Remark
Cylindrical
Shaft hole Y
Applicable to long, short series,
Recommended short series
There is a hole in the hole
Short cylindrical
Shaft hole
Type J recommended […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 3852
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3852-2017 | Tapes and dimensions for coupling bores and their connection | current edition | Current |
| GB/T 3852-2008 | Tapes and dimensions for coupling bores and their connection | previous edition | Superseded |
This page sells the current edition, GB/T 3852-2017. Earlier editions are listed for reference only.
How to Download GB/T 3852-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3852-2017
$265.00