Valid

JB/T 11058-2010FQT sleeve coupling used for metallurgical equipment (English PDF)

冶金设备用FQT型套筒联轴器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11058-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 14, 2010

Implementation date

October 1, 2010

Scope

JB/T 11058-2010 is the English-translated version of 冶金设备用FQT型套筒联轴器.

JB/T 11058-2010 is a recommended Chinese machinery industry standard for the FQT type sleeve coupling used on metallurgical equipment. It describes the structural type of the coupling and its main dimensions, sets technical requirements and inspection rules, and covers marking, packaging and storage.

The coupling joins two spindles and transmits torque from 1400 Nm to 125000 Nm, within a stated allowable angular displacement, for ambient temperatures from -30 °C to +300 °C. Among the standards it quotes are GB/T 191, GB/T 1184-1996, GB/T 3852, GB/T 4879, JB/T 5000.1, JB/T 5000.8 and JB/T 5000.15-2007.

The Chinese classification recorded for it is J19, and the international classification is 21.120.20.

Found what you need?

Document preview — JB/T 11058-2010

National Standard of the People's Republic of China

ICS
21.120.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Technical Requirements
  • 4.1 Pallet
  • 4.2 Pallet Package
  • 5 Measurement and Evaluation Method
  • 5.1 Paper Box and Calp Box
  • 5.2 Wooden Box
  • 6.1 Materials
  • 6.2 Dimension and Tolerance
  • 6.3 Box Making
  • 6.4 Packing
  • 6.5 Marks
  • 7 Test Method
  • 7.1 Material Test
  • 7.2 Measurement of Dimensional Tolerance
  • 7.3 Appearance Inspection
  • 7.4 Property Test
  • 8 Inspection rules
  • 9 Marking, packaging, transportation and storage

1 Foreword

JB/T 11058-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 May 2010 and has been in force since 1 October 2010.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for the FQT type sleeve coupling used on metallurgical equipment. It describes the structural type of the coupling and its main dimensions, sets technical requirements and inspection rules, and covers marking, packaging and storage. The coupling joins two spindles and transmits torque from 1400 Nm to 125000 Nm, within a stated allowable angular displacement, for ambient temperatures from -30 °C to +300 °C. Among the standards it quotes are GB/T 191, GB/T 1184-1996, GB/T 3852, GB/T 4879, JB/T 5000.1, JB/T 5000.8 and JB/T 5000.15-2007. The Chinese classification recorded for it is J19, and the international classification is 21.120.20.

JB/T 11058-2010 falls under ICS 21.120.20, in the field of mechanical systems and components.

This catalogue holds 260 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications

GB/T 3852

GB/T 4879

GB/T 13384

JB/T 5000.1

JB/T 5000.8

JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

JB/T 9050.2-2024 — General technical requirement - Part 2: The determination method for contact spot

GB/T 5015-2017 — Gear coupling with elastomer

GB/T 14118-1993 — Harmonic drive reducers

JB/T 15078-2025 — Drum gear coupling for hot rolling endless finishing mill

JB/T 11587-2025 — Large tooth-type electromagnetic clutch

JB/T 11061-2010 — ZT circumferential elastic couplings for metallurgical equipment

6 Classification and status

International classification (ICS): 21.120.20

Chinese Standard Classification (CCS): J 19

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11058-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11058-2010

$85.00