GB/T 26103.3-2010Curved tooth coupling GCLD (English PDF)
GCLD 型鼓形齿式联轴器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26103.3-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 10, 2011
Implementation date
October 1, 2011
Scope
GB/T 26103.3-2010 is the English-translated version of GCLD 型鼓形齿式联轴器.
GB/T 26103.3-2010 is Part 3 of GB/T 26103, on drum-shaped teeth couplings, and covers the GCLD type drum gear coupling. Clause 1 states that this part specifies the type, basic parameters and main dimensions, technical requirements, inspection rules, marking, packaging and storage of the GCLD type drum gear coupling, called the coupling below.
The same clause states that it applies to GCLD type drum gear couplings that connect the horizontal shafting of electrical and mechanical equipment and that have a certain capacity to compensate the relative displacement of the two shafts, for a working environment temperature of -20 to 80 degrees Celsius and a transmitted nominal torque of 1.60 kN.m to 56.00 kN.m.
Clause 2 cites GB/T 3852 and GB/T 26103.1-2010.
Clause 3, "Types, basic parameters and the main dimensions", requires the types, basic parameters and main dimensions of the coupling to comply with Figure 1 and Table 1, and the draft on the page breaks off there, so the technical requirements, inspection rules and the marking, packaging and storage clauses are not shown.
The foreword states that GB/T 26103 is divided into five parts, of which this is the third, and that the five cover in turn two types of drum gear coupling, the GCLD type and two types with brake.
It also states that this part is centrally managed by the National Standardization Technical Committee of the machine shaft and accessories (SAC/TC109) and was drafted by China's second heavy machinery company and Hebei Jizhou Joint Factory among other units. It was issued on 2011-01-10 and has applied since 2011-10-01.
Found what you need?
Document preview — GB/T 26103.3-2010
National Standard of the People's Republic of China
- ICS
- 21.120.20
- Classification
- J 19
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Types, basic parameters and the main dimensions
Foreword
GB/T 26103 "drum-shaped teeth coupling" is divided into five parts.
--- The first part 1. GIICL type drum gear coupling;
Part --- Article 2. GIICLZ type drum gear coupling;
Part --- Section 3. GCLD type drum gear coupling;
Part --- Chapter 4. NGCL type with brake drum gear coupling;
Part --- Article 5. NGCLZ type with brake drum gear coupling.
This is Part 3 GB/T 26103 of.
1 Scope
GB/T 26103 provisions of this part of the GCLD type drum gear coupling (hereinafter referred to as the coupling) the type, basic parameters and the main To size, technical requirements, inspection rules, marking, packaging and storage and so on.
This section applies to electrical and mechanical coupling shafting the horizontal axis, and has a two-axis compensation relative displacement performance GCLD Type drum gear coupling, the working environment temperature -20 °C ~ 80 °C, nominal torque is transmitted 1.60kN . m ~ 56.00kN . m.
2 Normative references
The following documents contain provisions which, through reference GB/T 26103 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 3852 and the coupling shaft hole coupling type and size
GB/T 26103.1-2010 GIICL type drum gear coupling
3 Types, basic parameters and the main dimensions
3.1 Coupling Types, basic parameters and the main dimensions shall comply with Figure 1 and Table 1.
Figure 1
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26103.3-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26103.1-2010 — Curved tooth coupling GIICL
GB/T 3852-2017 — Tapes and dimensions for coupling bores and their connection
GB/T 38520-2020 — Marine cryogenic breakaway coupling
Secure payment via Stripe
Payments accepted
GB/T 26103.3-2010
$105.00