Valid

GB/T 3883.404-2025Safety of motor-operated hand-held, transportable and garden tools - Part 404: Particular requirements for pedestrian controlled walk-behind lawnmowers (English PDF)

手持式、可移式电动工具和园林工具的安全 第404部分:步行控制割草机的专用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (82 pages)

Need quotation for your management?

Get a formal quotation for GB/T 3883.404-2025 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Recommended

Issue date

October 31, 2025

Implementation date

May 1, 2026

Scope

GB/T 3883.404-2025 is the English-translated version of 手持式、可移式电动工具和园林工具的安全 第404部分:步行控制割草机的专用要求.

GB/T 3883.404-2025 — Except for the following provisions, this chapter of GB/T 3883.1-2014 applies. Increase. This document applies to pedestrian control. --- Drum mowers; and --- Rotary lawnmower.

It is equipped with. ---Metal cutting devices; and/or --- Rigid non-metallic cutting devices; and/or ---One or more cutting elements are non-metallic cutting devices mounted around an axis on a generally circular drive unit.

These cutting elements it is cut by centrifugal force, and the kinetic energy of each cutting element is greater than 10J. Note 101.A tool equipped with non-metallic cutting devices and whose kinetic energy of each cutting element is not greater than 10J is considered a lawn trimmer.

This document is not applicable to. ---Smart lawnmower; ---Remote-controlled lawnmower; ---Flare mowers and accessories; ---Scissors-type lawnmower; ---Grass mower; --- Sickle-type lawnmower; ---Towed/Semi-trailer lawnmower; ---Shrub clearer; ---Lawn trimmers and lawn edgers; --- Lawn trimmer; --- Lawn mower; ---Brush cutter; ---Brush cutting saw; ---Agricultural lawnmower; ---Trailer seats/passenger components; ---Riding tool; ---Non-powered lawnmower; ---An internal combustion engine-powered lawnmower; ---Hybrid and fuel cell powered tools and their associated charging systems; and ---Garden tractors or their accessories.

Note 102.Intelligent lawnmowers are currently specified by GB/T 4706.110, and will be specified by future parts of GB/T 3883. Note 103.Lawn trimmers and lawn edgers are specified in GB/T 3883.403.

Found what you need?

Document preview — GB/T 3883.404-2025

National Standard of the People's Republic of China

ICS
25.140.20
Classification
K 64
Replacing
GB/T 4706.78-2005

Issued by: State Administration for Market Regulation

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 General Requirements
  • 5 General Experimental Conditions
  • 6 Radiation, toxicity and similar hazards
  • 7 Categories
  • 8 Markings and instructions 6.
  • 9 Protection against contact with live parts 8.
  • 10 Start
  • 11 Input power and current
  • 12 Fever
  • 13 Heat resistance and flame retardancy
  • 14 Moisture resistance
  • 15 Rust prevention
  • 16 Overload protection for transformers and related circuits
  • 17 Durability
  • 18 Abnormal Operations
  • 19 Mechanical Hazards
  • 20 Mechanical strength
  • 21 Structure
  • 22 Internal wiring
  • 23 Components
  • 24 Power connection and external flexible cord
  • 25 Terminal block for external wires
  • 26 Grounding protection device
  • 27 Screws and fasteners
  • 28 Creepage distance, clearance and insulation penetration distance
  • Appendix I (Informative) Measurement of Noise and Vibration
  • Appendix K (Normative) Battery-Powered Tools and Battery Packs
  • Appendix L (Normative) Provides battery-powered tools and battery packs with either a power connection or a non-isolated source.
  • Appendix AA (Normative) Safety Signs
  • Appendix BB (Normative) Test Fence
  • Appendix CC (Normative) Foot Protection Test for Rotary Lawn Mowers
  • Appendix DD (Normative) Test on Braking Time of Lawn Mower Cutting Devices
  • Appendix EE (Normative) Examples of Materials and Structures Conforming to Artificial Ground Requirements
  • References

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".

Drafting.

This document is Part 404 of GB/T 3883, "Safety of Hand-held, Portable Power Tools and Garden Tools". GB/T 3883...

---GB/T 3883.401-2023 Safety of Handheld and Portable Power Tools and Garden Tools - Part 401: Chainsaws Requirements;

---GB/T 3883.402-2023 Safety of handheld and portable power tools and garden tools - Part 402: Pruning shears Special requirements;

---GB/T 3883.403-2017 Safety of handheld, portable power tools and garden tools - Part 4: Walking and hand-held power tools Special requirements for handheld lawn mowers and lawn trimmers;

Specific requirements for lawnmowers;

---GB/T 3883.405-2025 Safety of Handheld and Portable Power Tools and Garden Tools - Part 405: Special Purpose of Grass Shears Requirements.

This document replaces GB/T 4706.78-2005 "Safety of household and similar electrical appliances - Part 2: Pedestrian-controlled electric lawnmowers".

The main technical changes in the "Special Requirements for Machines" compared to GB/T 4706.78-2005 are as follows.

a) The general requirements used in conjunction with this document have been changed from GB 4706.1-2005 to GB/T 3883.1-2014;

b) Added detailed explanations of inapplicable terms (see Chapter 1);

c) Terms such as "operating normally" have been removed; "cutting device" has been changed to "cutting equipment," etc. (See Chapter 3, 2005 edition) Chapter 3);

d) The requirement in section 4.101 (Chapter 4 of GB/T 4706.78-2005) has been deleted;

e) Added descriptions of accessories and configurations, lawnmower quality specifications, and test sample requirements (see Chapter 5);

f) Added requirements for some safety symbols, easily identifiable and durable markings, and safety instructions and information in the instruction manual (see Chapter 8);

g) The relevant requirements and testing methods for fever have been changed (see Chapter 12, Chapter 11 of GB/T 4706.78-2005);

h) The test conditions for moisture resistance have been modified and added (see Chapter 14, Chapter 15 of GB/T 4706.78-2005);

i) The test methods for durability have been changed (see Chapter 17, Chapter 18 of GB/T 4706.78-2005);

j) Table 4 in the abnormal operation section has been modified (see Chapter 18, Chapter 19 of GB/T 4706.78-2005);

k) The requirements 19.1, 19.7, etc., in the General Requirements for Mechanical Hazards have been amended; among them, 19.101.1 has been added for rotary lawnmowers.

Requirements such as these; for drum mowers, requirements such as 19.103.1 have been added (see Chapter 19, GB/T 4706.78-2005, section...).

Chapter 20);

l) Increased requirements for the mechanical strength of rotary lawnmowers, such as 20.101.1 (see Chapter 20);

m) Added requirements regarding the handle shaft in the structure; added requirements such as 21.101 (see Chapter 21);

n) Added requirements for testing switches (section 23.1.10) and protective devices (section 23.3) in the components (see Chapter 23);

o) Changes were made to the power connection and the connection method in the external flexible cord, etc. (see Chapter 24, GB/T 4706.78-2005, section...) Chapter 25);

p) Added battery-powered tools and battery packs (specifications) (see Appendix K);

q) Added battery-powered tools and battery packs that provide power connection or non-isolated sources (specifications) (see Appendix L);

r) The safety signs for safety instructions and warnings have been revised (normative) (see Appendix AA, Appendix AA of GB/T 4706.78-2005);

s) The test enclosure has been modified (informative) (see Appendix BB, Appendix BB of GB/T 4706.78-2005);

t) Added a foot protection test for rotary lawnmowers (standard) (see Appendix CC);

u) Added a braking time test for lawnmower cutting devices (standard) (see Appendix DD);

v) Modified the examples of materials and structures conforming to the requirements for artificial ground (normative) (see Appendix EE, GB/T 4706.78-2005).

Record CC).

This document is equivalent to IEC 62841-4-3:2020 "Safety of hand-held and portable power tools and garden machinery driven by electric motors".

Part 4-3.Specific requirements for walk-controlled lawnmowers.

The following minimal editorial changes have been made to this document.

---The standard title has been changed to "Safety of Handheld, Portable Power Tools and Garden Tools - Part 404: Walk-Controlled Lawn Mowers" Specific requirements.

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed by the China Electrical Equipment Industry Association.

This document is under the jurisdiction of the National Technical Committee on Standardization of Electric Tools (SAC/TC68).

Introduction

This document is consistent with GB/T 3883.1-2014 "Safety of handheld, portable power tools and garden tools - Part 1: General requirements" Use them together.

The parts of this document marked "Applicable" indicate that the corresponding clauses in GB/T 3883.1-2014 apply; the parts marked "Replace" indicate that...

In cases where the provisions of this document apply, the terms of this document shall prevail; where "modified" is specified in this document, it indicates that the relevant clauses of GB/T 3883.1-2014 are subject to change.

The content is subject to the revised version of this document, while other provisions in this clause remain applicable; any parts marked "added" in this document indicate that, in addition to...

In addition to complying with the relevant clauses of GB/T 3883.1-2014, it must also comply with the clauses added in this document.

In.2014, my country issued the national standard GB/T 3883.1-2014, "Safety of Handheld and Portable Power Tools and Garden Tools, Section 1".

Part. General Requirements, which replaces the original GB/T 3883 (Handheld Power Tools), GB/T 13960 (Portable Power Tools), and GB/T 4706 (Garden Power Tools Only) integrates the common technical requirements of the general safety standards for the three major series of power tools.

The specific requirements for certain types of subcategories of products used in conjunction with GB/T 3883.1-2014 consist of three parts, namely Part 2 (hand...

Parts 1 (Handheld Power Tools), 2 (Portable Power Tools), and 3 (Garden Power Tools) are all converted to their corresponding national standards.

The specific requirements of the international standard IEC 62841 series.

The main elements of the standard title have been expanded to "Safety of handheld, portable power tools and garden tools," while retaining the original term "handheld power tools." the standard number for this part is GB/T 3883.The standard sub-section number for each subcategory of product consists of three digits, where the first digit...

The second and third digits indicate the corresponding parts, with the second and third digits representing different subcategories of products.

The new GB/T 3883 series standards will form a relatively scientific, complete, universal, and unified series of safety standards for power tool products.

The system makes the implementation of standards more practical and convenient to use.

Currently, the following standards have been released under the new GB/T 3883 series standards for "Garden Power Tools".

---GB/T 3883.401-2023 Safety of Handheld and Portable Power Tools and Garden Tools - Part 401: Chainsaws the purpose of these requirements is to standardize the specific safety requirements for a subcategory of chainsaw products.

---GB/T 3883.402-2023 Safety of handheld and portable power tools and garden tools - Part 402: Pruning shears the purpose of these specific requirements is to standardize the specific safety requirements for a subcategory of pruning shears.

---GB/T 3883.403-2017 Safety of handheld, portable power tools and garden tools - Part 4: Walking and hand-held power tools Specific requirements for handheld lawn mowers and lawn trimmers. The purpose is to standardize the use of walk-behind and handheld lawn mowers and lawn trimmers.

Specific safety requirements for edge-machine subcategories of products;

The specific requirements for lawnmowers aim to standardize the specific safety requirements for the walk-controlled lawnmower subcategory.

---GB/T 3883.405-2025 Safety of Handheld and Portable Power Tools and Garden Tools - Part 405: Special Purpose of Grass Shears the purpose of these requirements is to standardize specific safety requirements for a subcategory of grass shears.

The following standards will be revised in the future.

---GB/T 4706.65-2003 Safety of household and similar electrical appliances - Part 2: Walk-controlled electric lawn rafters Special requirements for sand loosening machines;

---GB/T 4706.79-2005 Safety of household and similar electrical appliances - Part 2: Handheld electric garden dust blowers Special requirements for chip suction machines and blow-suction combined machines;

---GB/T 4706.110-2021 Safety of household and similar electrical appliances - Part 2: Battery-powered smart lawn mowers Special requirements for grass harvesters.

Safety of handheld, portable power tools and garden tools Part 404: Specific requirements for walk-controlled lawnmowers

1 Scope

Except for the following provisions, this chapter of GB/T 3883.1-2014 applies.

Increase.

This document applies to pedestrian control.

--- Drum mowers; and

--- Rotary lawnmower.

It is equipped with.

---Metal cutting devices; and/or

--- Rigid non-metallic cutting devices; and/or

---One or more cutting elements are non-metallic cutting devices mounted around an axis on a generally circular drive unit. These cutting elements it is cut by centrifugal force, and the kinetic energy of each cutting element is greater than 10J.

Note 101.A tool equipped with non-metallic cutting devices and whose kinetic energy of each cutting element is not greater than 10J is considered a lawn trimmer.

This document is not applicable to.

---Smart lawnmower;

---Remote-controlled lawnmower;

---Flare mowers and accessories;

---Scissors-type lawnmower;

---Grass mower;

--- Sickle-type lawnmower;

---Towed/Semi-trailer lawnmower;

---Shrub clearer;

---Lawn trimmers and lawn edgers;

--- Lawn trimmer;

--- Lawn mower;

---Brush cutter;

---Brush cutting saw;

---Agricultural lawnmower;

---Trailer seats/passenger components;

---Riding tool;

---Non-powered lawnmower;

---An internal combustion engine-powered lawnmower;

---Hybrid and fuel cell powered tools and their associated charging systems; and

---Garden tractors or their accessories.

Note 102.Intelligent lawnmowers are currently specified by GB/T 4706.110, and will be specified by future parts of GB/T 3883.

Note 103.Lawn trimmers and lawn edgers are specified in GB/T 3883.403.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 82 pages — is available in the English PDF.

How to Download GB/T 3883.404-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
82 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 3883.404-2025

$1,220.00