Search YS/T
500 YS/T standards in English, from YS/T 746.6-2010 to YS/T 1046.7-2015, in code order.
- YS/T 746.6-2010Methods for chemical analysis of lead-free tin-based solders. Part 6: Determination of antimony content. Flame atomic absorption spectrometric method$85.00
- YS/T 746.7-2010Methods for chemical analysis of lead-free tin-based solders. Part 7: Determination of iron content. Flame atomic absorption spectrometric method$85.00
- YS/T 746.8-2010Methods for chemical analysis of lead-free tin-based solders. Part 8: Determination of arsenic content. Molybdenum antimony arsenate blue spectrometric method$85.00
- YS/T 746.9-2010Methods for chemical analysis of lead-free tin-based solders. Part 9: Determination of zinc content. Flame atomic absorption spectrometric method and Na2EDTA titrimetric method$135.00
- YS/T 747-2010Lead-free tin-based solder$135.00
- YS/T 748-2010The energy consumption of zinc and lead mine for mining and processing$135.00
- YS/T 749-2011Titanium-steel clad tubesheet for condenser and heat exchanger used in electric power station$135.00
- YS/T 750-2011Hot rolled titanium coil$135.00
- YS/T 750-2022Hot Rolled Titanium Coil$205.00
- YS/T 751-2011Designation and composition of tantalum and tantalum alloy$75.00
- YS/T 751-2024Tantalum and Tantalum Alloy Grades and Chemical Compositions$165.00
- YS/T 752-2011Composite zirconia powder$135.00
- YS/T 753-2011Zirconium and zirconium alloy sheet and plate for pressure vessel$135.00
- YS/T 754-2011Platinum dioxide$115.00
- YS/T 754-2025Platinum dioxide$90.00
- YS/T 755-2011Ruthenium (Ⅲ) nitrosylnitrate$195.00
- YS/T 755-2025Ruthenium (III) nitrosyl nitrate$105.00
- YS/T 756-2011Cesium carbonate$115.00
- YS/T 757-2011Copper particles$115.00
- YS/T 757-2025Copper particles$150.00
- YS/T 758-2011Straightness measuring method of rotary kiln for aluminium-carbon$135.00
- YS/T 759-2011Copper and copper alloy casting rod$135.00
- YS/T 759-2020Copper and copper alloy cast rods$150.00
- YS/T 760-2011D-type copper tube for electrical purposes$135.00
- YS/T 761-2011Free-cutting copper-alloy ingots for drinking water system components$225.00
- YS/T 762-2011Technical specification for mined area regeneration of karst accumulating type of bauxite$135.00
- YS/T 763-2011Graphitized coke produced by electrical calciner$199.00
- YS/T 763-2019Graphitized cathode carbon block with calcined petroleum coke$124.00
- YS/T 764-2011Determination equipment for the thermal expansion coefficient of carbonaceous materials used in the production of aluminium$135.00
- YS/T 765-2011Safety specification for transportation of electronic waste$135.00
- YS/T 766-2011Safety specification for storege of electronic waste$135.00
- YS/T 767-2012Energy consumption quota in producing antimony concentrate$135.00
- YS/T 768-2011Flame atomic absorption spectrometric analysis method of litbium in eledrolyte cryolite$165.00
- YS/T 769.1-2011Aluminum and aluminum alloy tubes, rods, profiles safe production specification - Part 1: extrusion, rolling and stretching$255.00
- YS/T 769.2-2011Aluminum and aluminum alloy tubes, rods, profiles safe production specification - Part 2: anodizing and electrophoresis painting$180.00
- YS/T 769.3-2011Aluminum and aluminum alloy tubes, rods, profiles production safety specifications - Part 3: electrostatic spraying$165.00
- YS/T 769.4-2011Aluminum and aluminum alloy tubes, rods, profiles safe production specification - Part 4: Heat production profiles$120.00
- YS/T 770-2011Aluminium and aluminium alloys circles$135.00
- YS/T 771-2026Technical specification for smart management and control of aluminium extrustion dies$225.00
- YS/T 772-2011Aluminum and aluminum alloys strips for computer radiator$165.00
- YS/T 773-2011Aluminium alloy profiles used for the frameworks of solar cells$255.00
- YS/T 773-2020Aluminum alloy profile for solar cell frame$240.00
- YS/T 775.1-2011Methods for chemical analysis of lead anode slime. Part 1: Determination of lead content. Na2EDTA titrimetric method$105.00
- YS/T 775.2-2011Methods for chemical analysis of lead anode slime. Part 2: Determination of bismuth content. Flame atomic absorption spectrophotometry and Na2EDTA titrimetric method$165.00
- YS/T 775.3-2011Methods for chemical analysis of lead anode slime. Part 3: Determination of arsenic content. Potassium bromate titrimetric method$105.00
- YS/T 775.4-2011Methods for chemical analysis of lead anode slime. Part 4: Determination of antimony content. Flame atomic absorption spectrophotometry and cerium sulfate titrimetric method$165.00
- YS/T 775.5-2011Methods for chemical analysis of lead anode slime. Part 5: Determination of gold and silver content. Fire assay gravimetric method$105.00
- YS/T 775.6-2011Methods for chemical analysis of lead anode slime. Part 6: Determination of copper content. Iodine titration method$105.00
- YS/T 775.7-2011Methods for chemical analysis of lead anode slime. Part 7: Determination of arsenic, copper and selenium content. Inductively coupled plasma atomic emission spectrometery$105.00
- YS/T 776-2011Aluminum-silicon masteralloy for titanium alloy$105.00
- YS/T 777-2011Zirconium clad steel plate$165.00
- YS/T 778-2011Vacuum dewaxing and sintering furnace$145.00
- YS/T 778-2025Vacuum degreasing sintering furnace$165.00
- YS/T 780-2011Aluminum alloy extruded profiles used for motor shell$195.00
- YS/T 781.2-2012The technical requirements of assessment for cleaner production performance in industry of aluminium and aluminium alloy tubes, rods/bars and profiles. Part 2: Products of anodizing and electrophoretic painting$225.00
- YS/T 781.3-2012The technical requirements of assessment for cleaner production performance in industry of aluminium and aluminium alloy tubes, rods/bars and profiles. Part 3: Products of powder spraying$225.00
- YS/T 781.4-2012The technical requirements of assessment for cleaner production performance in industry of aluminium and aluminium alloy tubes, rods/bars and profiles. Part 4: Products of PVDF spraying$195.00
- YS/T 782.5-2013The technical requirements for assessment of cleaner production performance in industry of aluminium and aluminium alloy plates, sheets, strips and foils. Part 5: Hydrophilic aluminium foils$205.00
- YS/T 784-2012Measurement of technical parameter for aluminium cell$195.00
- YS/T 784-2024Aluminum electrolytic cell technical parameter measurement method$285.00
- YS/T 785-2012Determination of relative crystallinity of zeolite sodium A by X-ray diffraction$105.00
- YS/T 786-2012Shaped refractory insulating products. Red mud and flyash bricks$105.00
- YS/T 787-2012Recovery of iron ore from red mud$105.00
- YS/T 788-2012Lithium hydride$105.00
- YS/T 789-2012Rubidium carbonate$105.00
- YS/T 790-2012Iridium tubes$105.00
- YS/T 790-2025Iridium tubes$120.00
- YS/T 791-2012Platinum target$115.00
- YS/T 792-2012Carbon-carbon composites crucible used in single crystal furnace$165.00
- YS/T 793-2012Copper drawing stock from recycling for electrical purpose by pyrometallurgy$165.00
- YS/T 794-2012Seed sheet of titanium$165.00
- YS/T 795-2012Sheet of titanium and titanium alloy for golf head$165.00
- YS/T 796-2012Tungsten crucible$105.00
- YS/T 796-2024Tungsten Crucible$85.00
- YS/T 797-2012Aluminum shell for portable lithium ion battery$105.00
- YS/T 798-2012Lithium nickel cobalt manganese oxide$105.00
- YS/T 798-2025Lithium nickel cobalt manganese oxide$165.00
- YS/T 799-2012Test method for the surface cleaness of aluminum and aluminum alloy sheets, strips and foils$85.00
- YS/T 800-2012Calculation methods for carbon dioxide emissions resulting from aluminium reduction processes$109.00
- YS/T 801-2012Measuring and calculating methods for perfluorocarbon emissions resulting from a group of cells$165.00
- YS/T 801-2026Determination method of perfluorocarbon emissions from aluminium electrolysis production$165.00
- YS/T 802-2012Flocculating agent used in production of alumina$165.00
- YS/T 803-2012Smelter grade alumina$165.00
- YS/T 803-2023Metallurgical grade alumina$120.00
- YS/T 804-2012Test method for the grinding work index of bauxitic ore$105.00
- YS/T 806-2012Chemical analysis method for rare earth in aluminium and aluminium alloys. Determination of La, Ce, Pr, Nd, Sm contents. X-ray fluorescence spectrometric method$105.00
- YS/T 806-2020Methods for chemical analysis of aluminum and aluminum alloys Determination of element content X-ray fluorescence spectrometry$194.00
- YS/T 808-2012Copper foil for solar energy equipment$165.00
- YS/T 809-2012Copper and copper alloy special-shaped strip for socket connector$165.00
- YS/T 809-2025Copper and copper alloy special-shaped belts for connectors$210.00
- YS/T 810-2012Recycling copper strips for electrical purposes$195.00
- YS/T 811-2012Copper plate for stave$165.00
- YS/T 812-2012Oxygen free copper bar and wire for vacuum electron devices$195.00
- YS/T 813-2012Methods of sampling and sample preparation for chemical composition analysis of waste miscellaneous brass$165.00
- YS/T 814-2012Test method for stress corrosion resistance of brass finished products$165.00
- YS/T 815-2012Preparation method of test pieces for mechanical and technological properties of copper and copper alloys$255.00
- YS/T 815-2025specimen preparation for testing mechanical and process property of copper and copper alloys$240.00
- YS/T 816-2012High purity selenium$105.00
- YS/T 817-2012High purity tellurium$105.00
- YS/T 818-2012High purity bismuth$105.00
- YS/T 819-2012High-purity sputtering copper target used in electronic film$165.00
- YS/T 820.1-2012Methods for chemical analysis of laterite nickel ores - Part 1: Determination of nickel content - Flame atomic absorption spectrometry$105.00
- YS/T 820.10-2012Methods for chemical analysis of laterite nickel ores - Part 10: Determination of calcium, cobalt, copper, magnesium, manganese, nickel, phosphate and zinc content - Inductively coupled plasma atomic emission spectrometry$125.00
- YS/T 820.11-2012Methods for chemical analysis of laterite nickel ores. Part 11: Determination of fluorine and chlorine contents. Ion chromatography$165.00
- YS/T 820.12-2012Methods for chemical analysis of laterite nickel ores. Part 12: Determination of manganese content. Flame atomic absorption spectrometry$115.00
- YS/T 820.13-2012Methods for chemical analysis of laterite nickel ores. Part 13: Determination of lead content. Flame atomic absorption spectrometry$105.00
- YS/T 820.14-2012Methods for chemical analysis of laterite nickel ores. Part 14: Determination of zinc content. Flame atomic absorption spectrometry$105.00
- YS/T 820.15-2012Methods for chemical analysis of laterite nickel ores. Part 15: Determination of cadmium content. Flame atomic absorption spectrometry$105.00
- YS/T 820.16-2012Methods for chemical analysis of laterite nickel ores - Part 16: Determination of carbon and sulfur content - High frequency combustion with infrared absorption spectrometry$105.00
- YS/T 820.17-2012Methods for chemical analysis of laterite nickel ores. Part 17: Determination of arsenic, antimony and bismuth contents. Hydride generation-atomic fluorescence spectrometry$149.00
- YS/T 820.18-2012Methods for chemical analysis of laterite nickel ores. Part 18: Determination of mercury content. Cold atomic absorption spectrometry$105.00
- YS/T 820.19-2012Methods for chemical analysis of laterite nickel ores. Part 19: Determination of aluminum, chromium, iron, magnesium, manganese, nickel and silicon contents. Energy-dispersive X-ray fluorescence spectrometry$205.00
- YS/T 820.2-2012Methods for chemical analysis of laterite nickel ores. Part 2: Determination of nickel content. Dimethylglyoxime spectrophotometry$105.00
- YS/T 820.20-2012Methods for chemical analysis of laterite nickel ores. Part 20: Determination of aluminum content. EDTA titration$105.00
- YS/T 820.21-2013Methods for chemical analysis of laterite nickel ores. Part 21: Determination of chromium content. The ammonium-ferrous sulfate titration method$105.00
- YS/T 820.22-2012Methods for chemical analysis of laterite nickel ores. Part 22: Determination of magnesium content. EDTA titration$105.00
- YS/T 820.23-2012Methods for Chemical Analysis of Laterite Nickel Ores - Part 23: Determination of Cobalt, Iron, Nickel, Phosphorus, Aluminium Oxide, Calcium Oxide, Chromium Oxide, Magnesium Oxide, Manganese Oxide, Silicon Dioxide and Titanium Dioxide Content - Wavelength$115.00
- YS/T 820.24-2012Methods for chemical analysis of laterite nickel ores- Part 24:Determination hygroscopic moisture content-Gravimetric method$109.00
- YS/T 820.25-2012Methods for chemical analysis of laterite nicekel ores. Part 25: Determination of combined water content. Gravimetric method$149.00
- YS/T 820.26-2012Methods for chemical analysis of laterite nickel ores. Part 26: Determination of loss on ignition. Gravimetric method$105.00
- YS/T 820.3-2012Methods for chemical analysis of laterite nickel ores - Part 3: Determination of total iron content - Potassium dichromate titration$95.00
- YS/T 820.3-2013[YS/T 820.3-2012] Chemical analysis of nickel laterite Part 3: Determination of total iron content of potassium dichromate titration$120.00
- YS/T 820.4-2012Methods for chemical analysis of laterite nickel ores. Part 4: Determination of phosphorus content. Phosphorus molybdenum blue spectrophotometry$105.00
- YS/T 820.5-2012Methods for chemical analysis of laterite nickel ores. Part 5: Determination of cobalt content. Flame atomic absorption spectrometry$105.00
- YS/T 820.6-2012Methods for chemical analysis of laterite nickel ores. Part 6: Determination of copper content. Flame atomic absorption spectrometry$105.00
- YS/T 820.7-2012Methods for chemical analysis of laterite nickel ores. Part 7: Determination of calcium and magnesium content. Flame atomic absorption spectrometry$105.00
- YS/T 820.8-2012Methods for Chemical Analysis of Laterite Nickel Ores - Part 8: Determination of Silica Content - Potassium Silica fluoride Titrimetric Method$105.00
- YS/T 820.9-2012Methods for chemical analysis of lateritic nickel ore. Part 9: Determination of scandium and cadmium contents. Inductively coupled plasma mass spectrometry$105.00
- YS/T 821-2012Aluminum alloy cover board for battery$165.00
- YS/T 822-2012NiCr-Cr3C2 composite powders$105.00
- YS/T 823-2012Sintered tungsten plate blank$105.00
- YS/T 823-2024Sintered Tungsten Plate$105.00
- YS/T 824-2012Aluminum-tin masteralloy for titanium alloy$105.00
- YS/T 825-2012Lithium titanium oxide$165.00
- YS/T 826-2012Niobium pentoxide target material$105.00
- YS/T 827-2012Tantalum ingot$149.00
- YS/T 827-2024Tantalum Ingot$105.00
- YS/T 828-2012Titanium anodes for use in cathodic protection of soils or natural waters$165.00
- YS/T 828-2022Titanium anodes for cathodic protection$285.00
- YS/T 829-2012Battery grade lithium-silicon alloy$105.00
- YS/T 830-2012N-butyllithium$165.00
- YS/T 831-2012TZM molybdenum alloy bars$165.00
- YS/T 832-2012Determination of rhodium in spent oxo. Alcohols catalyst. Inductively coupled plasma atomic emission spectrometry$105.00
- YS/T 832-2020Methods for chemical analysis of spent butanol catalysts. Determination of carboxyl group content. Inductively coupled plasma atomic emission spectrometry$135.00
- YS/T 833-2012Methods for chemical analysis of ammonium rhenate. Determination of beryllium, magnesium, aluminium, potassium, calcium, titanium, chromium, manganese, iron, cobalt, copper, zinc and molybdenum contents in ammonium rhenate. Inductively coupled plasma atom$145.00
- YS/T 833-2020Method for chemical analysis of ammonium rhenate - Determination of beryllium, magnesium, aluminium, potassium, calcium, titanium, chromium, manganese, iron, cobalt, copper, zinc, molybdenum, lead, tungsten, sodium, tin, nickel, silicon contents-Inductive$244.00
- YS/T 834-2012Determination of loss on ignition in reforming spent platinum catalyst$105.00
- YS/T 835-2012Determination of platinum, palladium and rhodium in exhaust purfication metallic substrate auto-catalysts. Flame atomic absorption spectrometry$105.00
- YS/T 835-2024Determination of platinum, palladium and rhodium content in metal-supported catalysts for exhaust gas purification - Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry$255.00
- YS/T 836-2012Perrhenic acid$195.00
- YS/T 837-2012Standard practice for ultrasonic C-scan bond evaluation of sputtering target-backing plate assemblies$165.00
- YS/T 838-2012Cadmium telluride$195.00
- YS/T 839-2012Test method for measurement of insulator thickness and refractive index on silicon substrates by ellipsometry$165.00
- YS/T 840-2012Classification and technical specification for renewable crystal silicon$105.00
- YS/T 840-2025Renewable silicon raw materials$90.00
- YS/T 841-2012The technical requirements for assessment of cleaner production performance in magnesium smelting industry$195.00
- YS/T 842-2012Petroleum coke for graphitized cathode carbon block$105.00
- YS/T 843-2012Petroleum coke for pre-baked anode$105.00
- YS/T 843-2024Technical requirements for petroleum coke raw materials for prebaked anodes$120.00
- YS/T 844-2012Technical specification for assembling process of architecture aluminium alloy profiles with thermal barrier strip$165.00
- YS/T 844-2017Specification for composite materials for aluminum alloy building insulation$389.00
- YS/T 845-2012Aluminum alloy round billets by spray forming$165.00
- YS/T 846-2012Aluminium foils for cigarette packaging$165.00
- YS/T 846-2025Aluminum foil for cigarette packaging$210.00
- YS/T 847-2012High strength aluminum alloy tubes for tent$165.00
- YS/T 848-2012Aluminium and aluminium alloy concatenation casting-rolled drawing stock$135.00
- YS/T 849-2012Coated aluminium foils for rigid phenolic foam sandwich panel$195.00
- YS/T 850-2012Aluminium-steel cladding transition joint$145.00
- YS/T 850-2024Aluminum-steel composite transition joint$150.00
- YS/T 851-2012Technical specification for on-line rotating degassing system used for aluminium and aluminium alloy melts$165.00
- YS/T 851-2023Aluminum melt online degassing filtration device$165.00
- YS/T 852-2012Aluminium and aluminium alloy foils for household$195.00
- YS/T 852-2021Household aluminum and aluminum alloy foil$285.00
- YS/T 853-2012Zirconium and zirconium alloy castings$165.00
- YS/T 854-2012Tungsten iridium nozzle$165.00
- YS/T 855-2012Gold prill$105.00
- YS/T 855-2025Gold granules$90.00
- YS/T 856-2012Silver prill$105.00
- YS/T 856-2025Silver granules$90.00
- YS/T 857-2012Silver bar$105.00
- YS/T 858-2013Zircon concentrate$105.00
- YS/T 859-2013Linear and superelastic titanium nickel alloy bar and wire$165.00
- YS/T 860-2013Vanadium pentoxide used for non-ferrous master alloy and catalyst$125.00
- YS/T 861.1-2013Mehtods for chemical analysis of niobium-titanium alloy. Part 1: Determination of aluminium, nickel, silicon, iron, chromium, copper and tantalum content. Inductively coupled plasma atomic emission spectrometry$165.00
- YS/T 861.2-2013Methods for chemical analysis of niobium-titanium alloy. Part 2: Determination of oxygen and nitrogen content. Inert gas fusion infrared/thermal conductivity method$105.00
- YS/T 861.3-2013Methods for chemical analysis of niobium-titanium alloy. Part 3: Determination of hydrogen content. Inert gas fusion thermal conductivity method$105.00
- YS/T 861.4-2013Methods for chemical analysis of niobium-titanium alloy. Part 4: Determination of carbon content. The high-frequency infrared absorption method$105.00
- YS/T 861.5-2013Methods for chemical analysis of niobium-titanium alloy. Part 5: Determination of titanium content-The ammonium ferric sulfate titration$105.00
- YS/T 862-2013Recycling casting lead brass profile$165.00
- YS/T 862-2023Recycled Cast Lead Brass Solid Profiles$210.00
- YS/T 863-2013Copper profiles for computer heat sink$195.00
- YS/T 863-2025Copper profile for computer cooling systems$225.00
- YS/T 864-2013Method of slab band tinsel surface cleanliness analysis of copper and copper alloys$115.00
- YS/T 864-2024Surface cleanliness test method for copper and copper alloy sheets, strips and foils$120.00
- YS/T 865-2013Copper and copper-alloy seamless tubes with high fins$195.00
- YS/T 865-2024Copper and copper alloy seamless high fin tube$255.00
- YS/T 866-2013Lead-free tin-based spraying wire for capacitor end face$135.00
- YS/T 866-2024Lead-free tin-based and zinc-based gold-sprayed wire for capacitor end surfaces$225.00
- YS/T 867-2013Silver-plated (silver nickel composite plating) of copper and copper alloy wire$135.00
- YS/T 868-2013Brass wires for unidirectional travelling electrical-discharge machining$165.00
- YS/T 869-2013Chemical analysis of 4A-Zeolite. X-ray fluorescence spectrometric method$149.00
- YS/T 870-2013Chemical analysis of high purity aluminium. Determination of trace impurities. Inductively coupled plasma mass spectrometry$135.00
- YS/T 870-2020Chemical analysis method of pure aluminum Determination of trace impurity element content Inductively coupled plasma mass spectrometry$180.00
- YS/T 871-2013Chemical analysis of high purity aluminium. Determination of trace impurities. Glow discharge mass spectrometry$165.00
- YS/T 871-2023Chemical analysis method of pure aluminum Determination of trace impurity element content Glow discharge mass spectrometry$120.00
- YS/T 872-2013Methods for chemical analysis gallium. Determination of mercury in industrial gallium. Atomic fluorescence spectrometer method$105.00
- YS/T 872-2023Chemical analysis method of gallium Determination of mercury and arsenic content Atomic fluorescence spectrometry$150.00
- YS/T 873-2013Specification of polishing coating on aluminum ally$195.00
- YS/T 874-2013Ultrasonic inspection of wrought aluminium alloy columniform ingots by the water immersion method$165.00
- YS/T 875-2013Coated aluminium alloy sheets and strips with high reflectivty used for lamp brackets$195.00
- YS/T 876-2013Standard practice for extrusion solution heat treatment for wrought aluminium alloys$105.00
- YS/T 877-2013Nickel-plated shell for rechargeable battery$135.00
- YS/T 878-2013Continuous belt type reduction furnace for sintering$135.00
- YS/T 878-2025Continuous belt type reduction furnace$135.00
- YS/T 879-2013Anino dithiophosphate$135.00
- YS/T 880-2013Sodium di-sec-butyl dithiophosphate$135.00
- YS/T 881-2013The dominated smelting nickel substrate material$165.00
- YS/T 882-2013Lead antimony concentrates$105.00
- YS/T 883-2013Zinc concentrate roasting$105.00
- YS/T 884-2013Niobium ingot$149.00
- YS/T 885-2013Titanium and titanium alloy forging blank$105.00
- YS/T 886-2013Unalloyed titanium profiles$135.00
- YS/T 886-2025Titanium profile$210.00
- YS/T 887-2013Ziconium and ziconium alloy welding wires$135.00
- YS/T 888-2013Classification for scrap wires and cables$195.00
- YS/T 888-2024Technical Specifications for Recycling of Waste Wires and Cables$210.00
- YS/T 889-2013Reproduced nickel powder for powder metallurgy$105.00
- YS/T 890-2013Recycled cobalt powder for powder metallurgy$105.00
- YS/T 890-2024Recycled cobalt powder for powder metallurgy$90.00
- YS/T 891-2013Methods for chemical analysis of high purity titanium. Determination of trace impurity element content. Glow discharge mass spectrometry$105.00
- YS/T 891-2024Chemical analysis method of high purity titanium - Determination of trace element content - Switch machine$90.00
- YS/T 892-2013Methods for chemical analysis of high purity titanium. Determination of trace impurity element content. Inductively coupled plasma mass spectrometry$105.00
- YS/T 892-2024Chemical analysis method of high purity titanium - Determination of trace impurity elements - Inductively coupled plasma mass spectrometry$120.00
- YS/T 893-2013High-purity sputtering titanium target used in electronic film$165.00
- YS/T 894-2013Ammonium perrhenate$105.00
- YS/T 894-2018Ammonium niobate$128.00
- YS/T 895-2013Methods for chemical analysis of high purity rhenium. Determination of trace impurity element content. Glow discharge mass spectrometry$105.00
- YS/T 896-2013Methods for chemical analysis of high purity niobium. Determination of trace impurity element content. Inductively coupled plasma mass spectrometry$105.00
- YS/T 896-2024Chemical analysis method for high purity niobium - Determination of trace impurity elements - Inductively coupled plasma mass spectrometry$165.00
- YS/T 897-2013Methods for chemical analysis of high purity niobium. Determination of trace impurity element content. Glow discharge mass spectrometry$105.00
- YS/T 897-2024Chemical analysis method for high purity niobium - Determination of trace element content - Glow discharge mass spectrometry$90.00
- YS/T 898-2013Methods for chemical analysis of the high purity tantalum. Determination of trace impurity element content. Inductively coupled plasma mass spectrometry$105.00
- YS/T 898-2024Chemical analysis method for high purity tantalum - Determination of trace impurity elements - Inductively coupled plasma mass spectrometry$150.00
- YS/T 899-2013Methods for chemical analysis of high purity tantalum. Determination of trace impurity element content. Glow discharge mass spectrometry$105.00
- YS/T 899-2024Chemical analysis method for high purity tantalum - Determination of trace element content - Glow discharge mass spectrometry$90.00
- YS/T 900-2013Methods for chemical analysis of the high purity tungsten. Determination of trace impurity element content. Inductively coupled plasma mass spectrometry$105.00
- YS/T 900-2024Chemical analysis method for high purity tungsten - Determination of trace impurity elements - Inductively coupled plasma mass spectrometry$150.00
- YS/T 901-2013Methods for chemical analysis of high purity tungsten. Determination of trace impurity element content. Glow discharge mass spectrometry$105.00
- YS/T 901-2024Chemical analysis method for high purity tungsten - Determination of trace element content - Glow discharge mass spectrometry$85.00
- YS/T 902-2013Methods for chemical analysis of high purity rhenium and ammonium perrhenate. Determination of beryllium, sodium, magnesium, aluminum, potassium, calcium, titanium, chromium, manganese, iron, cobalt, nickel, copper, zinc, arsenic, molybdenum, cadmium, ind$85.00
- YS/T 903.1-2013Method for chemical analysis of indium scraps. Part 1: Determination of indium content. EDTA titration$105.00
- YS/T 903.2-2013Method for chemical analysis of indium scraps. Part 2: Determination of tin content. Iodometric titration$105.00
- YS/T 903.3-2025Methods for chemical analysis of recycling indium ingredients - Part 3: Determination of impurity element contents - Inductively coupled plasma atomic emission spectrometry$165.00
- YS/T 904.1-2013Methods for chemical analysis of iron-chromium-aluminum fiber. Part 1: Determination of nitrogen content. Inert gas fusion thermal conductivity method$105.00
- YS/T 904.2-2013Methods for chemical analysis of iron-chromium-aluminum fiber. Part 2: Determination of chromium and aluminum content. Inductively coupled plasma atomic emission spectrometry$105.00
- YS/T 904.3-2013Methods for chemical analysis of iron-chromium-aluminum fiber. Part 3: Determination of silicon, manganese, titanium, copper, lanthanum and cerium content. Inductively coupled plasma atomic emission spectrometry$145.00
- YS/T 904.4-2013Methods for chemical analysis of iron-chromium-aluminum fiber. Part 4: Determination of phosphorus content. Molybdenum blue spectrophotometry$105.00
- YS/T 904.5-2013Methods for chemical analysis of iron-chromium-aluminum fiber. Part 5: Determination of carbon and sulfur content. High-frequency infrared absorption method$105.00
- YS/T 905-2013Lithium-boron alloy$165.00
- YS/T 906-2013Aluminum alloy clad strips for air cooled condenser of power station$195.00
- YS/T 908-2013Nickel and nickel alloy sheet, strip and rods for vacuum electron devices$165.00
- YS/T 908-2024Nickel and nickel alloy sheets, strips, foils and bars for cathode materials of electric vacuum devices$165.00
- YS/T 909-2013Oxygen free copper tube for vacuum electron devices$195.00
- YS/T 910-2013Determination of copper content for brass. lodimetry$105.00
- YS/T 911-2013U-Bend seamless copper and copper alloys tubes$195.00
- YS/T 912-2013Anode pure copper shot$105.00
- YS/T 913-2013Zirconium and zirconium alloy discs and rings$165.00
- YS/T 914-2013Aluminum case for power lithium battery$105.00
- YS/T 914-2024Aluminum shell for power lithium battery$210.00
- YS/T 915-2013The lead antimony alloys ingot for the accumulator cell slab lattice$165.00
- YS/T 916-2013High purity cadmium$105.00
- YS/T 917-2013Chemical analysis methods for high purity cadmium.Determination of trace impurity elements content.Glow discharge mass spectrometry$105.00
- YS/T 918-2013Ultra purity mercury$105.00
- YS/T 919-2013High purity copper ingot$165.00
- YS/T 919-2025High purity copper ingot$120.00
- YS/T 920-2013High purity zinc$105.00
- YS/T 921-2013Copper matte$105.00
- YS/T 921-2025Frosted Copper$150.00
- YS/T 922-2013Methods for chemical analysis of high purity copper. Determination of trace impurity elements content. Glow discharge mass spectrometry$105.00
- YS/T 923.1-2013Methods for chemical analysis of high purity bismuth. Part 1: Determination of copper, lead, zinc, iron, silver, arsenic, tin, cadmium, magnesium, chromium, aluminum, gold and nickel content. Inductively coupled plasma-mass spectrum method$85.00
- YS/T 923.2-2013Methods for chemical analysis of high purity bismuth. Part 2: Determination of trace impurity elements content. Glow discharge mass spectrometry$105.00
- YS/T 923.2-2024Chemical analysis method for high purity bismuth - Part 2: Determination of trace impurity element content - Glow discharge mass spectrometry$150.00
- YS/T 924-2013Safety specification for hydrophilic aluminium foils production$195.00
- YS/T 925-2013Deoxidization nickle powder$165.00
- YS/T 926-2013High purity tellurium dioxide$105.00
- YS/T 927-2013Bismuth trioxide$105.00
- YS/T 927-2025Bismuth trioxide$120.00
- YS/T 928.1-2013Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide. Part 1: Determination of chloride ion contents. Silver chloride turbidimetry$105.00
- YS/T 928.2-2013Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide. Part 2: Determination of nickel cntents. Dimethylglyoxime gravimetric$105.00
- YS/T 928.3-2013Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide. Part 3: Determination of nickel, cobalt, manganese content. Inductively coupled plasma atomic emission spectromertric$85.00
- YS/T 928.3-2026Chemical analysis methods of nickel cobalt manganese ternary precursor - Part 3: Determination of nickel, cobalt and manganese contents - Na2EDTA titration method and inductively coupled plasma atomic emission spectrometry$255.00
- YS/T 928.4-2013Methods for chemical analysis of nickel cobalt manganese composite hydrogen oxide - Part 4: Determination of iron, calcium, magnesium, copper, zinc, silicon, aluminium, sodium contents - Inductively coupled plasma atomic emission spectrometric$145.00
- YS/T 928.4-2025Methods for chemical analysis of nickel-cobalt-manganese ternary precursor-Part 4: Determination of iron, calcium, magnesium, copper, zinc, silicon, aluminium, sodium, lead and sulphur contents-Inductively coupled plasma atomic emission spectromertry$240.00
- YS/T 928.5-2013Methods for chemical analysis of nickel cobalt manganese composite hydroxide. Part 5: Determination of lead contents. Inductively coupled plasma mass spectrometry$105.00
- YS/T 928.6-2013Methods for Chemical Analysis of Nickel Cobalt Manganese Composite Hydroxide Part 6: Determination of Sulfate Ion Contents Ion Chromatography$165.00
- YS/T 928.7-2026Methods for chemical analysis of nickel cobalt manganese ternary precursor - Part 7: Determination of fluorine and chlorine contents - Ion selective electrode method and ion chromatography method$180.00
- YS/T 928.8-2026Methods for chemical analysis of nickel cobalt manganese ternary precursor - Part 8: Determination of nickel, cobalt, manganese contents - X-ray fluorescence spectrometric method$120.00
- YS/T 929-2013Palladium acetate(Ⅱ)$105.00
- YS/T 929-2024Palladium acetate$85.00
- YS/T 930-2013Tetraammine dichloropalladium(Ⅱ)$105.00
- YS/T 930-2024Tetraamminepalladium dichloride$105.00
- YS/T 931-2013Palladium(Ⅱ)nitrate$105.00
- YS/T 931-2024Palladium nitrate$210.00
- YS/T 932-2013Platinum nitrate$105.00
- YS/T 932-2025Platinum (II, IV) nitrate$210.00
- YS/T 933-2013Rhodium(Ⅱ)octanoate dimer$105.00
- YS/T 933-2025Rhodium (II) octanoate dime$180.00
- YS/T 934-2013Plates or sheets of oxides dispersion strengthened platinum and platinum-rhodium$145.00
- YS/T 934-2026Oxide dispersion strengthened platinum and platinum-rhodium plates, sheets and wires$135.00
- YS/T 935-2013Standard guide for analysis and reporting the impurity content and grade of high purity metallic sputtering targets for electronic thin film applications$105.00
- YS/T 936-2013Sputtering nickel vanadium alloy target used in integrated circuit device$235.00
- YS/T 937-2013Nickel-platinum target$315.00
- YS/T 937-2025Nickel-platinum target$240.00
- YS/T 938.1-2013Chemical analysis methods of gold alloys and palladium alloys for dental ceramic restoration. Part 1: Determination of gold content. Gravimetry by sodium nitrite reduction$105.00
- YS/T 938.2-2013Chemical analysis methods of gold alloys and palladium alloys for dental ceramic restoration. Part 2: Determination of palladium content. Dimethylglyoxime gravimetry$105.00
- YS/T 938.3-2013Chemical analysis methods of gold alloys and palladium alloys for dental ceramic restoration. Part 3: Determination of silver content. Flame atomic absoption spectrometry and potentiometric titration$145.00
- YS/T 938.4-2013Chemical analysis methods of gold alloys and palladium alloys for dental ceramic restoration. Part 4: Determination of gold, platinum, palladium, copper, tin, indium, zinc, gallium, beryllium, iron, manganese, lithium content. Inductively coupled plasma a$205.00
- YS/T 939-2013Tetrammineplatinum(II)chloride$165.00
- YS/T 939-2019Dichlorotetraammine$105.00
- YS/T 940-2013Gold potassium citrate$105.00
- YS/T 941-2013Rhodium(Ⅲ)iodide$105.00
- YS/T 941-2025Rhodium (��)iodide$120.00
- YS/T 942-2013Specification of precious metals and their alloy brazing filler materials for microwave magnetrons devices$195.00
- YS/T 943-2013Palladium(II) sulfate$105.00
- YS/T 943-2024Palladium sulfate$90.00
- YS/T 944-2013Composite material of AgSnO2/Copper and its alloy$165.00
- YS/T 945-2013The norm of energy consumption per unit products of tantalum-niobium concentrates$165.00
- YS/T 946-2013The norm of energy consumption per unit products of tantalum-niobium metallurgical enterprise$165.00
- YS/T 947-2013Molybdenum concentrate recovered in the process of non-ferrous metal ore dressing$105.00
- YS/T 948-2014Scraps of gallium$85.00
- YS/T 948-2026Gallium recovery material$210.00
- YS/T 949-2014Terminology of nonferrous metal scraps$295.00
- YS/T 950-2014Methods for sampling and sample preparation of laterite nickel ores in bulk$355.00
- YS/T 951-2014Laterite nickel ores - Determination of moisture content of a consignment$135.00
- YS/T 952-2014Methods for chemical analysis of multi-metallic ores. Determination of copper and molybdenum contents. Inductively coupled plasma-atomic emission spectrometry$85.00
- YS/T 953.1-2014Methods for chemical analysis of fire smelting nickel substrate material - Part 1: Determination of nickel content - Dimethylglyoxime spectrophotometric method and dimethylglyoxime gravimetric method$135.00
- YS/T 953.10-2014Methods for chemical analysis of fire smelting nickel substrate material - Part 10: Determination of nickel, chromium, manganese, cobalt, copper and phosphorus contents - Inductively coupled plasma atomic emission spectrometric method$135.00
- YS/T 953.11-2014Methods for chemical analysis of fire smelting neckel substrate material. Part 11: Determination of Lead, Arsenic, Cadmium and Mercury contents. Inductively coupled plasma-mass spectrometric method$145.00
- YS/T 953.2-2014Methods for chemical analysis of fire smelting nickel substrate material. Part 2: Determination of silicon content. Molybdosilicate blue spectrophotometric method and perchloric acid dehydration gravimetric method$145.00
- YS/T 953.3-2014Methods for chemical analysis of nickel substrate material. Part 3: Determination of phosphorus content. Bismuth phosphomolybdate blue spectrophotometric method$85.00
- YS/T 953.4-2014Methods for chemical analysis of fire smelting nickel substrate material. Part 4: Determination of chrome content. Ammonium ferrous sulfate titration method$85.00
- YS/T 953.5-2014Methods for chemical analysis of fire smelting nickel substrate material. Part 5: Determination of manganese content. Potassium periodate spectrophotometric method$85.00
- YS/T 953.6-2014Methods for chemical analysis of fire smelting nickel substrate material. Part 6: Determination of cobalt content. 5-CI-PADAB spectrophotometric method and flame atomic absorption spectrometric method$145.00
- YS/T 953.7-2014Methods for chemical analysis of fire smelting nickel substrate material. Part 7: Determination of copper content. BCO spectrophotometric method and flame atomic absorption spectrometric method$145.00
- YS/T 953.8-2014Methods for chemical analysis of fire smelting nickel substrate material. Part 8: Determination of iron content. Titanium trichloride reduction-potassium dichromate titrimetric method$85.00
- YS/T 953.9-2014Methods for chemical analysis of fire smelting nickel substrate material. Part 9: Determination of carbon and sulfur contents. Infrared absorption method after high frequency combustion$85.00
- YS/T 954-2014Gold-arsenic alloy for evaporating$145.00
- YS/T 955.1-2014Methods for chemical analysis of silver. Part 1: Determination of silver content. Fire assay method$85.00
- YS/T 955.2-2014Methods for chemical analysis of crude silver. Part 2: Determination of palladium content. Flame atomic absorption spectrometric method$85.00
- YS/T 955.2-2024Chemical analysis method of crude silver - Part 2: Determination of palladium content - Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry$240.00
- YS/T 955.3-2020Chemical analysis methods for crude silver - Part 3: Determination of gold content. Fire assay gold enrichment-inductively coupled plasma atomic emission spectrometry$90.00
- YS/T 955.4-2025Methods for chemical analysis of crude silver - Part 4: Determination of lead, copper, bismuth, antimony, iron,elenium, tellurium and palladium contents - Inductively coupled plasma atomic emission spectrometry$210.00
- YS/T 956.1-2014Chemical analysis method of gold and germanium alloys. Part 1: Determination of germanium content. Inductively coupled plasma atomic emission specitrometry$85.00
- YS/T 956.2-2014Chemical analysis method of gold and germanium alloys.Part 2: Determination of germanium content - Potentiometric titration using potassium iodate$145.00
- YS/T 957-2014Ammonium chloride rhodium$85.00
- YS/T 957-2025Ammonium chloride rhodium$105.00
- YS/T 958-2014Methods for chemical analysis of silver. Determination of copper, bismuth, iron, lead, antimony, palladium.selenium and tellurium contents. Inductively coupled plasma-atomic emission spectrometry$145.00
- YS/T 959-2014Methods for chemical analysis of silver. Determination of copper, bismuth, iron, lead, antimony, palladium, selenium and tellurium contents. Spark atomic emission spectrometry$145.00
- YS/T 960-2014Aluminum clad copper tube for air conditioner and refrigeration equipment$205.00
- YS/T 961-2014Inner grooved aluminum clad copper tube for air conditioner and refrigeration equipment$205.00
- YS/T 962-2014Copper alloy continuous casting tube$145.00
- YS/T 962-2024Copper alloy continuous casting pipe$210.00
- YS/T 963-2014Determinator for electrical resistivity of granules of calcined coke$145.00
- YS/T 964-2014Determinator for the reactivity to air of carbon block used in the production of aluminium$205.00
- YS/T 965-2014Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium$205.00
- YS/T 966-2014Electrical calcined anthracite for cathode blocks$85.00
- YS/T 967-2014Battery grade lithium dihydrogen phosphate$85.00
- YS/T 967-2026Battery grade lithium dihydrogen phosphate$135.00
- YS/T 968-2014Battery grade lithium oxide$85.00
- YS/T 969-2014Method of constant temperature tensile test for nickel-titanium shape memory alloy wires$145.00
- YS/T 970-2014Phase change temperature measuring method for nickel-titanium shape memory alloys$145.00
- YS/T 970-2024Determination method of phase transition temperature of nickel-titanium shape memory alloy$180.00
- YS/T 971-2014Titanium-nickel shape me: ncry alloy wires$145.00
- YS/T 972-2014Ethylene glycol antimony powder$85.00
- YS/T 973-2014Brass wire for battery cell stem$145.00
- YS/T 974-2014Copper and copper alloy strip for compound contacts$145.00
- YS/T 974-2025Copper and copper alloy strip for composite contact materials$150.00
- YS/T 975-2014Technology specification for homogenization of bauxite ores$205.00
- YS/T 976-2014Determination of alpha -alumina content in calcined alumina by X-ray diffraction$85.00
- YS/T 977-2014Carbon/carbon composites heat insulation cylinder of single crystal furnace$145.00
- YS/T 978-2014Carbon/carbon composites guide shield of single crystal furnace$145.00
- YS/T 979-2014High purity gallium oxide$85.00
- YS/T 980-2014Derermination of impurities of purity gallium oxide. Inductively coupled plasma-mass spectrmetry$145.00
- YS/T 981.1-2014Methods for chemical analysis of high purity indium. Determination of magnesium, aluminum, silicon, sulphur, iron, nickel, copper, zinc, arsenic, silver, cadmium, tin, thallium, lead content. High mass resolution glow discharge mass specrometry$145.00
- YS/T 981.1-2024Chemical analysis method of high purity indium - Part 1: Determination of trace impurity element content - Glow discharge mass spectrometry$150.00
- YS/T 981.2-2014Methods for chemical analysis of high purity indium. Determination of magnesium, aluminum, iron, nickel, copper, zinc, silver, cadmium, tin and lead. Inductively coupled plasma mass spectrometry$145.00
- YS/T 981.3-2014Methods for chemical analysis of high pure indium. Determination of silicon content. Molybdenum blue spectrophotometric method$85.00
- YS/T 981.4-2014Method for chemical analysis of high pure indium. Determination of tin content. Benzfluorenone-cetyltrimethylammonium bromide spectrophotometric method$85.00
- YS/T 981.5-2014Methods for chemical analysis of high pure indium-Determination of thallium content. Rhodamine B spectrophotometric method$85.00
- YS/T 983-2014Test method for measuring composition of polysilicon deposition reactor and TCS to STC converter vent gas$90.00
- YS/T 983-2024Determination of tail gas composition in silicon polycrystalline reduction furnace - Gas chromatography$165.00
- YS/T 984-2014Determination of boron and phosphorus concent in silicon powder by chemical analysis$145.00
- YS/T 985-2014Polished reclaimed silicon wafers$205.00
- YS/T 986-2014Specification for serial alphanumeric marking of the front surface of wafers$185.00
- YS/T 987-2014Test method for measuring carbon containing compound in chlorosilane-Determination of methyldichlorosilane$150.00
- YS/T 987-2021Determination of carbon content in chlorosilanes by gas chromatography-mass spectrometry$204.00
- YS/T 988-2014Carboxyethyl-germanium sesquioxide$90.00
- YS/T 989-2014Germanium grain$85.00
- YS/T 990.1-2014Methods for chemical analysis of copper matte. Part 1: Determination of copper content. Iodine titration method$85.00
- YS/T 990.10-2014Methods for chemical analysis of copper matte. Part 10: Determination of silicon dioxide content. Molybdenum blue spectrophotometry and potassium fluosilicate titrimetric method$145.00
- YS/T 990.11-2014Methods for chemical analysis of copper matte, Part 11: Determination of nickel content, Atomic absorption spectrmetry$85.00
- YS/T 990.12-2014Methods of chemical analysis of copper matte.Part 12: Determination of aluminum oxide content.Spectrophotometry of chromazurol S$85.00
- YS/T 990.13-2014Methods for chemical analysis of copper mattee. Part 13:Determination of magnesium oxide content. Atomic absorption spectrmetry$85.00
- YS/T 990.14-2014Methods for chemical analysis of copper matte. Part 14: Determination of zinc content. Atomic absorption spectrmetry and NazEDTA titration methods$145.00
- YS/T 990.15-2014Methods for chemical analysis of copper matte. Part 15: Determination of antimony content. Atomic absorption spectrometry$85.00
- YS/T 990.16-2014Methods for chemical analysis of copper matte. Part 16: Determination of mercury content. Cold atomic absorption spectrometry$85.00
- YS/T 990.17-2015Methods for chemical analysis of copper matte - Part 17: Determination of cobalt content - Atomic absorption spectrometry$85.00
- YS/T 990.18-2014Methods for chemical analysis of copper matte. Part 18: Determination of lead, zinc, nickel, arsenic, bismuth, antimony, calcium, magnesium, cadmium and cobalt content. Inductively coupled plasma atomic emission spectrometry$145.00
- YS/T 990.2-2014Methods for chemical analysis of copper matte. Part 2: Determination of gold and silver contents. Atomic absorption spectrmetry and fire assay method$145.00
- YS/T 990.3-2014Methods for chemical analysis of copper matte. Part 3: Determination of sulfur content. Gravimetric method and combustion titration method$145.00
- YS/T 990.4-2014Methods for chemical analysis of copper matte. Part 4: Determination of bismuth content. Atomic absorption spectrometry$85.00
- YS/T 990.5-2014Methods for chemical analysis of copper matte. Part 5: Determination of fluorine content. Ion-selective electrode method$85.00
- YS/T 990.6-2014Methods for chemical analysis of copper matte. Part 6: Determination of lead content. Atomic absorption spectromtry and Na2EDTA titration method$145.00
- YS/T 990.7-2014Methods for chemical analysis of copper matte. Prat 7: Determination of cadmium content. Atomic absorption spectrometry$85.00
- YS/T 990.8-2014Methods for chemical analysis of copper matte. Part 8: Determination of arsenic content. Hydride generation-atomic fluorescence spectrometry, silver diethyldithiocarbamate spectrophotometry and potassium bromate titrimetry$205.00
- YS/T 990.9-2014Methods for chemical analysis of copper matte. Part 9: Determination of iron content Potassium dichromate titration method$85.00
- YS/T 990.9-2025Methods for chemical analysis of copper matte - Part 9: Determination of total iron and ferriferrous oxide contents$270.00
- YS/T 991-2014Copper anode mud$85.00
- YS/T 992-2014Lead anode mud$85.00
- YS/T 993-2014Zinc anode slime$85.00
- YS/T 994-2014Zinc master. alloy ingots for casting$145.00
- YS/T 995-2014Anode plate for zinc electrolysis in hydrometallurgy$145.00
- YS/T 995-2024Anode plates for hydrometallurgical zinc electrowinning$240.00
- YS/T 996-2014Antimony-doped tin oxide$85.00
- YS/T 997.1-2014Methods for chemical analysis of antimony-doped tin oxide. Part 1: Determination od tin content. Potassium iodate titrimetric method$85.00
- YS/T 997.2-2014Methods for chemical analysis of antimony. doped tin oxide. Part 2: Determination of antimony content. Cerium sulfate titration method$85.00
- YS/T 997.3-2014Methods for chemical analysis of antimony-doped tin oxide. Part 3: Determination of chlorine content. Mercuric sulfocyanide spectrophotometry$85.00
- YS/T 998-2014Al2O3 dispersion strengthened copper bar and wire$145.00
- YS/T 999-2014Capillary tube of copper and copper alloy. eddy curent testing method$145.00
- YS/T 999-2024Capillary eddy current testing method for copper and copper alloys$240.00
- YS/T 1000-2014Longitudinal wave method of ultrasonic inspection for copper and copper alloys tubes$150.00
- YS/T 1001-2014Method of ultrasonic inspection for sheet titanium and titanium alloy$150.00
- YS/T 1002-2014Calculation method of anode effect frequency and anode effect duration for aluminum electrolysis$90.00
- YS/T 1003-2014Aluminium and aluminium alloys foil used for building insulation$210.00
- YS/T 1004-2014Molten aluminum and aluminum alloys$210.00
- YS/T 1004-2025Molten aluminum and aluminum alloys$165.00
- YS/T 1005-2014Tantalum bar$90.00
- YS/T 1006.1-2014Methods for chemical analysis of lithium nickel cobalt manganese oxide. Part 1: Determination the total of nickel cobalt manganese content. EDTA disodium salt titration$90.00
- YS/T 1006.2-2014Methods for Chemical Analysis of Lithium Nickel Cobalt Manganese Oxide - Part 2: Determination of Lithium, Nickel, Cobalt, Manganese, Sodium, Magnesium, Aluminum, Potassium, Copper, Calcium, Iron, Zinc and Silicon Content - Inductively Coupled Plasma Atom$150.00
- YS/T 1006.2-2026Methods for chemical analysis of lithium nickel cobalt manganese oxide - Part 2: Determination of the elements content - Inductively coupled plasma atomic emission spectrometry$165.00
- YS/T 1007-2014Sintered stainless steel mesh filter materials$150.00
- YS/T 1008-2014Coated cobalt powder$150.00
- YS/T 1008-2024Coated cobalt powder$120.00
- YS/T 1009-2014Sintered metal porous materials. Determination of shear strength$90.00
- YS/T 1010-2014Test method for ring tensile strength of sintered porous metal$90.00
- YS/T 1011-2014Methods for chemical analysis of high purity cobalt. Determination of impurity elements content. Glow discharge mass spectrometry$90.00
- YS/T 1011-2025Method for chemical analysis of high purity cobalt - Determination of impurity elements contents - Glow discharge mass spectrometry$135.00
- YS/T 1012-2014Methods for chemical analysis of high purity nickel. Determination of trace impurity elements content. Glow discharge mass spectrometry$90.00
- YS/T 1012-2025Method for chemical analysis of high purity nickel - Determination of impurity elements contents - Glow discharge mass spectrometry$135.00
- YS/T 1013-2014Method for chemical analysis of high purity tellurium. Determination of sodium, magnesium, aluminum, chromium, iron, nickel, copper, zinc, selenium, silver, tin, lead, bismuth contents. Inductively coupled plasma-mass spectrum method$150.00
- YS/T 1014.1-2014Methods for chemical analysis of bismuth trioxide. Part 1: Determination of bismuth trioxide content. Na2 EDTA titrimetric method$90.00
- YS/T 1014.2-2014Methods for chemical analysis of bismuth trioxide. Part 2: Determination of silver, copper, magnesium, nickel, cobalt, manganese, calcium, iron, cadmium, lead, zinc, antimony, aluminium, sodium and sulfurcontents. Inductively coupled plasma atomic emissio$150.00
- YS/T 1014.3-2014Chemical analysis methods of bismuth trioxide. Part 3:Detemination of chlorine content. Silver chloride Comparison of turbidity method$90.00
- YS/T 1014.4-2014Chemical analysis methods of bismuth trioxide. Part 5: Determination of loss cont on ignition. Gravimetric method$90.00
- YS/T 1014.5-2014Chemical analysis methods of bismuth trioxide. Part 5: Determination of moisture. Gravimetric method$90.00
- YS/T 1015-2014Copper-indim alloy ingot$90.00
- YS/T 1016-2014Safety specification for aluminium and aluminium alloy drawing stocks and wires$285.00
- YS/T 1017-2015Rhenium powder$90.00
- YS/T 1018-2015Rhenium pellets$90.00
- YS/T 1019-2015Rubidium chloride$90.00
- YS/T 1020-2015Rubidium nitrate$90.00
- YS/T 1021-2015Potassium metavanadate$90.00
- YS/T 1022-2015Ammonium metavanadate$90.00
- YS/T 1023-2015Molybdenum-vanadium-aluminium master alloy$90.00
- YS/T 1024-2015Tantalum sputtering targets$150.00
- YS/T 1025-2015High-purity tungsten and tungsten alloy sputtering target used in electronic film$90.00
- YS/T 1026-2015Tungsten heavy alloy pellets for metal injection molding$129.00
- YS/T 1027-2015Lithium iron phosphate$150.00
- YS/T 1027-2024Lithium Iron Phosphate$165.00
- YS/T 1028.1-2015Methods for chemical analysis of lithium iron phosphate. Part 1: Determination of total iron content. Titanium trichloride reduction potassium dichromate titration methods$90.00
- YS/T 1028.2-2015Methods for chemical analysis of lithium iron phosphate. Part 2: Determination of lithium content. Flame photometry$90.00
- YS/T 1028.3-2015Methods for chemical analysis of lithium iron phosphate-Part 3:Determination of phosphor content-Quinoline phosphomolybdate gravimetry$90.00
- YS/T 1028.4-2015Methods for chemical analysis of lithium iron phosphate. Part 4: Determination of carbon content. High frequency combustion with infrared absorption method$90.00
- YS/T 1028.5-2015Methods for chemical analysis of lithium iron phosphate. Part 5: Determination of calcium, magnesium, zinc, copper, lead, chromium, sodium, aluminium, nickel, cobalt, manganese content. Inductively coupled plasma atomic emission spectrometry$150.00
- YS/T 1029-2015Tungsten top plate for ion source arc chamber$129.00
- YS/T 1030-2017Lithium-riched manganese cathode material$146.00
- YS/T 1031-2015Chemical vapor deposition furnace$150.00
- YS/T 1031-2025Chemical vapor deposition furnace$150.00
- YS/T 1032-2015Inspection method of the interior defects for cathode carbon block for aluminium electrolysis$90.00
- YS/T 1033-2015Determination of element contents in dry barrier - X-ray fluorescence spectrometric method$150.00
- YS/T 1034-2015Technical specification for oxalate removing on alumina production process$90.00
- YS/T 1035-2015Determination of carbon content in aluminum electrolyte - IR absorption spectrometry method$90.00
- YS/T 1036-2015Test method of optical emission spectrometric analysis of magnesium rare earth alloys$90.00
- YS/T 1037-2015Aluminium alloy pipe core used in aluminium and aluminium the producing of alloy foil$150.00
- YS/T 1038-2015Wedge shaped profiles of copper and copper alloys for for engine commutator$240.00
- YS/T 1038-2025Copper and copper alloy trapezoidal profile for motor commutator$255.00
- YS/T 1039-2015Rolled copper foil for flexible printed circuit board$210.00
- YS/T 1040-2015Copper-nickel-zinc alloy strips for resonator$129.00
- YS/T 1041-2015Copper and copper alloy strips for automotive terminals and connectors$210.00
- YS/T 1042-2015Free-cutting copper alloy cold-drawn hollow profile$210.00
- YS/T 1043-2015Silver oxygen-free copper strip for engine commutator$129.00
- YS/T 1044-2015Copper alloy strip for clothing metal accessories$169.00
- YS/T 1045-2015Copper-steel composite sheet and strip for decoration$300.00
- YS/T 1046.1-2015Methods for chemical analysis of copper slag concentrates. Part 1: Determination of copper content. Iodine titration method$90.00
- YS/T 1046.2-2015Methods for chemical analysis of copper slag concentrates - Part 2: Determination of gold and silver contents - Atomic absorption spectrmetry and fire assay method$150.00
- YS/T 1046.3-2015Methods for chemical analysis of copper slag concentrates - Part 3: Determination of sulfur content - Combustion-titration method$90.00
- YS/T 1046.4-2015Methods for chemical analysis of copper slag concentrates - Part 4: Determination of iron content - Potassium dichromate titration method$90.00
- YS/T 1046.5-2015Methods for chemical analysis of copper slag concentrates. Part 5: Determination of silicon dioxide content. Potassium fluosilicate titration method$90.00
- YS/T 1046.6-2015Methods for chemical analysis of copper slag concentrates. Part 6: Determination of aluminum oxide content. Inductively coupled plasma atomic emission spectrometry$90.00
- YS/T 1046.7-2015Methods for chemical analysis of copper slag concentrates. Part 7: Determination of arsenic, antimony, bismuth, lead, zinc and magnesium oxide content. Inductively coupled plasma atomic emission spectrometry$150.00