Search YS/T
500 YS/T standards in English, from YS/T 1348.3-2020 to YS/T 1741-2025, in code order.
- YS/T 1348.3-2020Chemical analysis methods of silver slag for lead smelting - Part 3: Determination of copper content. Flame atomic absorption spectrometry and iodometric method$150.00
- YS/T 1348.4-2020Chemical analysis methods of silver slag for lead smelting - Part 4: Determination of antimony content. Flame atomic absorption spectrometry and cerium sulfate titration$135.00
- YS/T 1348.5-2020Chemical analysis methods of silver slag for lead smelting - Part 5: Determination of bismuth content. Flame atomic absorption spectrometry and Na2EDTA titration$150.00
- YS/T 1348.6-2020Methods for chemical analysis of silver slag in lead smelting - Part 6: Determination of lead, copper, antimony and bismuth contents by inductively coupled plasma atomic emission spectrometry$105.00
- YS/T 1348.7-2021Lead smelting slag chemical analysis method - Part 7: Determination of arsenic content. Inductively coupled plasma atomic emission spectrometry$195.00
- YS/T 1349-2020Copper-steel composite bimetallic plate for bearing$120.00
- YS/T 1350-2020Silver oxygen-free copper special-shaped wire blank for motor commutator$120.00
- YS/T 1351-2020Zinc and zinc alloy wire$120.00
- YS/T 1352-2020Free-cutting copper alloy profile$300.00
- YS/T 1353-2020Tin-doped indium oxide powder$120.00
- YS/T 1354-2020Selenium powder$150.00
- YS/T 1355-2020Atomized phosphor bronze powder$105.00
- YS/T 1356-2020Atomized lead bronze powder$105.00
- YS/T 1357-2020Chromium-tantalum-titanium alloy sputtering target for magnetic recording$90.00
- YS/T 1358-2020Fe-Co-Ta alloy sputtering target for magnetic recording$135.00
- YS/T 1359-2020Lithium Tantalate Polycrystalline Powder$120.00
- YS/T 1360-2020Aluminum Strontium Alloy Wire$270.00
- YS/T 1361-2020Vacuum ladle for raw aluminum liquid$195.00
- YS/T 1362-2020Copper tube for plate core assembly of flat-plate solar collector$210.00
- YS/T 1363-2020Methods for chemical analysis of tellurium dioxide Determination of copper, silver, magnesium, nickel, zinc, calcium, iron, bismuth, selenium, lead, sodium, antimony and antimony content$85.00
- YS/T 1364-2020Lead sulfate by-product for smelting$105.00
- YS/T 1365-2020Sponge Cadmium$85.00
- YS/T 1366-2020Sponge Copper$85.00
- YS/T 1367-2020Tensile creep test method of titanium alloy sheet for aviation$135.00
- YS/T 1368-2020Interface hardness test method of titanium-steel explosive clad plate$105.00
- YS/T 1369-2020Nickel-molybdenum master alloy for titanium alloy$105.00
- YS/T 1370-2020Titanium tin master alloy for titanium alloy$105.00
- YS/T 1371-2020Tungsten material for ion implanter$90.00
- YS/T 1372-2020Molybdenum Titanium Zirconium (TZM) Alloy Powder$120.00
- YS/T 1373-2020Molybdenum Titanium Zirconium (TZM) Alloy Billet$135.00
- YS/T 1374-2020Superfine molybdenum powder$55.00
- YS/T 1375-2020Powder metallurgy iron-based copper infiltration sintered parts$70.00
- YS/T 1376-2020Cobalt Molybdenum Chromium Silicon Alloy Powder$120.00
- YS/T 1377-2020Nickel, cobalt and aluminum composite oxide$85.00
- YS/T 1378-2020Method for chemical analysis of pure palladium - Determination of platinum, rhodium, iridium, ruthenium, gold, silver, aluminum, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc and silicon contents - Inductively coupled plas$195.00
- YS/T 1379-2020Method for chemical analysis of pure platinum - Determination of palladium, rhodium, iridium, ruthenium, gold, silver, aluminum, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc and silicon contents - Inductively coupled plas$195.00
- YS/T 1380-2020Methods for chemical analysis of rhodium compounds-Determination of chloride ion and nitrate ion content-Ion chromatography$85.00
- YS/T 1381-2020Methods for chemical analysis of rhodium compounds Determination of arsenic content Atomic fluorescence spectrometry$105.00
- YS/T 1382-2020Methods for chemical analysis of silver-copper-phosphorus alloys-Determination of phosphorus content-Phosphorus molybdenum yellow spectrophotometric method$105.00
- YS/T 1383-20201,3-Bis(diphenylphenylcarboxaldehyde)palladium dichloride$120.00
- YS/T 1384-2020[2,2'-Bis(diphenylphosphine)-1,1'-binaphthalene]dichloronaphthalene$150.00
- YS/T 1385-2020Diiodine (p-cymene) carbon dioxide (II)$150.00
- YS/T 1386-2020Dichloro[1,1'-bis(di-tert-butylphosphine)ferrocene]palladium$90.00
- YS/T 1387-2020Dichlorophenyl formaldehyde$135.00
- YS/T 1388-2020Dichlorodi-tert-butyl-(4-dimethylaminophenyl) palladium phosphate$90.00
- YS/T 1389-2020Bis (1,5-cyclooctadiene) tetrafluoroborate formaldehyde$90.00
- YS/T 1390-2020Bis(di-tert-butylphenylphosphine)palladium dichloride$90.00
- YS/T 1391-2020Palladium pivalate$90.00
- YS/T 1392-2020Determination of chlorosilane content by gas chromatography$150.00
- YS/T 1393-2020Precious metal medal billet$120.00
- YS/T 1394-2020Lead smelting slag$85.00
- YS/T 1395.1-2020Methods for chemical analysis of palladium dichloride - Part 1: Determination of palladium content. Hydration recombination reduction gravimetric method$120.00
- YS/T 1395.2-2020Dichlorodiamine palladium chemical analysis method - Part 2: Determination of silver, gold, platinum, cathode, iridium, lead, nickel, copper, iron, tin, chromium content$120.00
- YS/T 1396.1-2020Methods for chemical analysis of platinum dichlorotetraamine - Part 1: Determination of platinum content. Gravimetric method$135.00
- YS/T 1396.2-2020Methods for chemical analysis of platinum dichlorotetraamine - Part 2: Determination of magnesium, calcium, iron, nickel, copper, cadmium, palladium, silver, iridium, gold and lead content$135.00
- YS/T 1397-2020Copper smelting slag$85.00
- YS/T 1398-2020Technical specification for waste heat utilization of aluminum carbon production$120.00
- YS/T 1399-2020Technical specification for desulfurization of petroleum coke calcined flue gas for prebaked anode production$150.00
- YS/T 1400-2020Specification for resource utilization of aluminum electrolysis anode carbon slag$120.00
- YS/T 1401-2020Equipment and management requirements for energy measuring instruments in the copper processing industry$150.00
- YS/T 1402-2020The quota of energy consumption per unit product of copper and copper alloy profiles$210.00
- YS/T 1403-2020Guidelines for the Evaluation of Green Plants in the Non-ferrous Metal Smelting Industry$390.00
- YS/T 1404-2020Technical specifications for the recycling of lead smelting wastewater$150.00
- YS/T 1405-2020Specification for treatment and reuse of lead-zinc beneficiation wastewater$165.00
- YS/T 1406-2021Evaluation requirements for green factories in the lead smelting industry$485.00
- YS/T 1407-2021Evaluation requirements for green factories in the copper smelting industry$485.00
- YS/T 1408-2021Evaluation requirements for green factories in the zinc smelting industry$485.00
- YS/T 1409-2021Technical specifications for the recycling of non-ferrous metals in waste LCD screens$145.00
- YS/T 1410-2021Technical specifications for waste heat recovery and utilization of heavy non-ferrous metallurgy furnaces$145.00
- YS/T 1411-2021Technical specifications for energy management center of non-ferrous metal smelting enterprises$145.00
- YS/T 1412-2021Cobalt smelting enterprise energy consumption quota per unit product$185.00
- YS/T 1413-2021Ultra high purity indium$145.00
- YS/T 1414-2021Nickel chromium alloy powder$145.00
- YS/T 1415-2021Determination of acidity in the leaching solution of hydrometallurgy of zinc$105.00
- YS/T 1415.2-2024Chemical analysis method of zinc hydrometallurgy leaching solution - Part 2: Determination of the content of impurities - Inductively coupled plasma atomic emission spectrometry$210.00
- YS/T 1416-2021Methods for chemical analysis of nickel oxide. Determination of copper, iron, zinc, calcium, magnesium, sodium, cobalt, cadmium, manganese and sulfur content. Inductively coupled plasma atomic emission spectrometry$145.00
- YS/T 1417-2021Nickel-zinc-ferrite composite foil$145.00
- YS/T 1418-2021Technical specifications for energy-saving supervision in electrolytic aluminum industry$485.00
- YS/T 1419-2021Evaluation requirements for green factories in the electrolytic aluminum industry$385.00
- YS/T 1420-2021Specification for resource utilization of aluminum electrolysis waste refractory materials$185.00
- YS/T 1421-2021Test method for energy consumption of carbon roasting for aluminum$165.00
- YS/T 1422-2021Technical specification for flue gas denitrification in aluminum carbon industry$185.00
- YS/T 1423-2021Evaluation requirements for green factories in lead-zinc mining and dressing industry$500.00
- YS/T 1424-2021Evaluation requirements for green factories in copper mining and dressing industry$500.00
- YS/T 1425-2021Guidelines for the evaluation of green factories in the copper and copper alloy processing industry$225.00
- YS/T 1426-2021Evaluation Guidelines for Green Plants in Non-ferrous Metals Mining and Processing Industry$500.00
- YS/T 1427-2021Evaluation requirements for green factories in tin smelting industry$485.00
- YS/T 1428-2021Evaluation requirements for green factories in the antimony smelting industry$485.00
- YS/T 1429-2021Evaluation requirements for green factories in the nickel smelting industry$485.00
- YS/T 1430-2021Evaluation requirements for green factories in the cobalt smelting industry$330.00
- YS/T 1431-2021The norm of energy consumption per unit product of molybdate$225.00
- YS/T 1432-2021Energy consumption for products of lithium salt$225.00
- YS/T 1433-2021Non-ferrous metal industry precious metal smelting unit product energy consumption quota$185.00
- YS/T 1434-2021Determination of hexachlorodisilane content by gas chromatography$135.00
- YS/T 1435-2021Rolled copper foil for electromagnetic shielding$185.00
- YS/T 1436-2021Forged thick copper plate for cooling equipment$185.00
- YS/T 1437-2021Galvanized brass wire for unidirectional wire EDM$265.00
- YS/T 1438-2021Copper-nickel alloy welded pipe for marine engineering piping system$255.00
- YS/T 1439-2021Zinc and zinc alloy sacrificial anode$315.00
- YS/T 1440-2021Bismuth Telluride$185.00
- YS/T 1441-2021Doped Co3O4$185.00
- YS/T 1442-2021Nickel and cobalt two-element composite oxide$185.00
- YS/T 1443-2021Nickel and cobalt two-element composite hydroxide$165.00
- YS/T 1444-2021Nickel-cobalt-titanium three-element composite hydroxide$185.00
- YS/T 1445.1-2021Chemical analysis methods of nickel, cobalt and aluminum three-element composite hydroxides - Part 1: Determination of nickel content. Dimethylglyoxime gravimetric method$195.00
- YS/T 1445.2-2021Chemical analysis methods of nickel, cobalt and aluminum composite hydroxides - Part 2: Determination of cobalt content. Potentiometric titration method$195.00
- YS/T 1445.3-2021Methods for chemical analysis of nickel, cobalt and aluminum composite hydroxides - Part 3: Determination of aluminum, copper, iron, zinc, calcium, magnesium, sodium, and manganese content. Inductively coupled plasma atomic emission spectrometry$485.00
- YS/T 1445.4-2021Chemical analysis methods of nickel, cobalt and aluminum composite hydroxides - Part 4: Determination of chloride ion content. Silver chloride turbidimetric method$225.00
- YS/T 1445.5-2021Chemical analysis methods of nickel, cobalt and aluminum composite hydroxides - Part 5: Determination of sulfate ion content. Barium sulfate turbidimetric method$195.00
- YS/T 1446-2021Zirconium tape for welded pipe$165.00
- YS/T 1447-2021Xenon lamp tungsten cathode$185.00
- YS/T 1448-2021Coated lithium nickel cobalt manganese oxide$195.00
- YS/T 1449-2021Nickel Cobalt Manganese Zirconium Compound Hydroxide$185.00
- YS/T 1450-2021Copper and copper alloy plate and strip cupping test method$165.00
- YS/T 1451-2021T-shaped copper material for electrical switch$195.00
- YS/T 1452-2021Copper alloy D-bar$225.00
- YS/T 1453-2021Rolled copper foil strip blank$185.00
- YS/T 1454-2021Ethyl xanthogenate$185.00
- YS/T 1455-2021Aluminum alloy profile for car sunroof guide$385.00
- YS/T 1456-2021Copper and copper alloy roof tiles$255.00
- YS/T 1457-2021Lead matte$315.00
- YS/T 1458-2021Crude antimony$135.00
- YS/T 1459-2021Copper smelting by-product sodium antimonate$125.00
- YS/T 1460-2021Crude nickel cobalt hydroxide$315.00
- YS/T 1461-2021Methods for chemical analysis of bismuth yellow Determination of bismuth content Na2EDTA volumetric method$185.00
- YS/T 1462.1-2021Chemical analysis methods for crude tin - Part 1: Determination of tin content Potassium iodate titration method$255.00
- YS/T 1462.2-2021Chemical Analysis Methods of Crude Tin - Part 2: Determination of Lead Content Flame Atomic Absorption Spectrometry and Na2EDTA Titration$285.00
- YS/T 1462.3-2021Chemical analysis methods for crude tin - Part 3: Determination of copper content Flame atomic absorption spectrometry and iodometry$285.00
- YS/T 1462.4-2021Chemical analysis methods for crude tin - Part 4: Determination of bismuth content Flame atomic absorption spectrometry and Na2EDTA titration$285.00
- YS/T 1462.5-2021Chemical analysis methods for crude tin - Part 5: Determination of antimony content Flame atomic absorption spectrometry and cerium sulfate titration$285.00
- YS/T 1462.6-2026Methods for chemical analysis of crude tin - Part 6: Determination of silver content - Flame atomic absorption spectrometry and potassium iodide-automatic potentiometric titration$270.00
- YS/T 1462.7-2026Methods for chemical analysis of crude tin - Part 7: Determination of copper, iron, bismuth, lead, antimony, indium, arsenic, cadmium, nickel and cobalt contents - Inductively coupled plasma atomic emission spectrometry$165.00
- YS/T 1463-2021Zirconium alloy pipe internal pressure creep test method$255.00
- YS/T 1464-2021Methods for chemical analysis of niobium-tungsten alloys. Determination of tungsten, molybdenum, zirconium, tantalum, silicon, iron, aluminum, titanium, and copper content$385.00
- YS/T 1465-2021Terminology and map of appearance defects of titanium and titanium alloy processed products$225.00
- YS/T 1466-2021Method of sample preparation for chemical composition analysis of zirconium and zirconium alloy$125.00
- YS/T 1467.1-2021Chemical analysis methods of hafnium - Part 1: Determination of lead content$225.00
- YS/T 1467.10-2021Chemical analysis methods of hafnium - Part 10: Determination of oxygen and nitrogen$195.00
- YS/T 1467.11-2021Chemical analysis methods of hafnium - Part 11: Determination of carbon content$225.00
- YS/T 1467.12-2021Chemical analysis methods of hafnium - Part 12: Determination of trace impurity elements$225.00
- YS/T 1467.2-2021Chemical analysis methods of hafnium - Part 2: Determination of uranium content$225.00
- YS/T 1467.3-2021Chemical analysis methods of hafnium - Part 3: Determination of boron content$225.00
- YS/T 1467.4-2021Chemical analysis methods of hafnium - Part 4: Determination of chlorine content$225.00
- YS/T 1467.5-2021Chemical analysis methods of hafnium - Part 5: Determination of cadmium content$225.00
- YS/T 1467.6-2021Chemical analysis methods of hafnium - Part 6: Determination of phosphorus content$225.00
- YS/T 1467.7-2021Chemical analysis methods of hafnium - Part 7: Determination of silicon content$195.00
- YS/T 1467.8-2021Chemical analysis methods of hafnium - Part 8: Determination of sodium content$195.00
- YS/T 1467.9-2021Chemical analysis methods of hafnium - Part 9: Determination of hydrogen content$185.00
- YS/T 1468-2021Titanium and titanium alloy plate and strip for catering utensils$195.00
- YS/T 1469-2021Titanium and titanium alloy laminated composite plate and strip for catering utensils$195.00
- YS/T 1470-2021Titanium and titanium alloy pipes for catering equipment$195.00
- YS/T 1471-2021Vanadium phosphate$255.00
- YS/T 1472.1-2021Chemical analysis methods for lithium-rich manganese-based cathode materials - Part 1: Determination of manganese content Potentiometric titration method$255.00
- YS/T 1472.2-2021Chemical analysis methods for lithium-rich manganese-based cathode materials - Part 2: Determination of cobalt content Potentiometric titration$255.00
- YS/T 1472.3-2021Chemical analysis methods for lithium-rich manganese-based cathode materials - Part 3: Determination of nickel content-Diacetyl oxime gravimetric method$225.00
- YS/T 1472.4-2021Methods for chemical analysis of lithium-rich manganese-based cathode materials - Part 4: Determination of lithium, nickel, cobalt, sodium, potassium, copper, calcium, iron, magnesium, zinc, aluminum, and silicon content - Inductively coupled plasma atomic emission spectrometry$285.00
- YS/T 1472.5-2021Chemical analysis methods for lithium-rich manganese-based cathode materials - Part 5: Determination of chlorine content Silver chloride turbidimetric method$225.00
- YS/T 1472.6-2021Chemical analysis methods for lithium-rich manganese-based cathode materials - Part 6: Determination of sulfate content-Ion chromatography$225.00
- YS/T 1473-2021High-purity molybdenum chemical analysis method Determination of trace impurity elements Glow discharge mass spectrometry$265.00
- YS/T 1474-2021High-temperature internal pressure blasting test method for zirconium alloy pipes$185.00
- YS/T 1475-2021Zirconium and zirconium alloy high and low magnification structure inspection method$315.00
- YS/T 1476-2021Methods for chemical analysis of zircon sand-Determination of barium content-Inductively coupled plasma atomic emission spectrometry$165.00
- YS/T 1477-2021Carbide teeth for roller press$185.00
- YS/T 1478-2021Aluminum-based boron carbide neutron absorbing material$185.00
- YS/T 1479-2021Nickel-chromium-aluminum composite powder$185.00
- YS/T 1480-2021Nickel-aluminum intermetallic compound sintered porous material tubular filter element$185.00
- YS/T 1481-2021Nickel manganese two element hydroxide$185.00
- YS/T 1482-2021Sintered metal porous material. Determination of the strength of tubular compacts$85.00
- YS/T 1483-2021Sintered metal porous material Determination of sulfuration corrosion performance$165.00
- YS/T 1484-2021Nickel Carbonyl Pellets$135.00
- YS/T 1485-2021Fe-Si-Al-based composite absorbing material$185.00
- YS/T 1486-2021Copper-nickel composite conductive foam$185.00
- YS/T 1487-2021Tungsten carbide threaded nozzle$335.00
- YS/T 1488-2021Carbide anvil$165.00
- YS/T 1489.1-2021Cobalt-chromium-tungsten alloy powder chemical analysis method - Part 1: Determination of cobalt content Potentiometric titration method$225.00
- YS/T 1489.2-2021Cobalt-chromium-tungsten alloy powder chemical analysis method - Part 2: Determination of chromium content Ferrous ammonium sulfate titration method$255.00
- YS/T 1489.3-2021Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 3: Determination of tungsten content. Inductively coupled plasma atomic emission spectrometry$195.00
- YS/T 1489.4-2021Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 4: Determination of nickel content. Dimethylglyoxime spectrophotometric method$225.00
- YS/T 1489.5-2021Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 5: Determination of silicon content. Molybdenum blue spectrophotometric method$225.00
- YS/T 1489.6-2021Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 6: Determination of iron and manganese content. Inductively coupled plasma atomic emission spectrometry$225.00
- YS/T 1489.7-2021Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 7: Determination of carbon content. High-frequency combustion infrared absorption method$225.00
- YS/T 1489.8-2021Cobalt-chromium-tungsten alloy powder chemical analysis method - Part 8: Determination of oxygen content Pulse heating inert gas melting-infrared absorption method$195.00
- YS/T 1490-2021Nickel-based superalloy powder inclusion content detection method$135.00
- YS/T 1491-2021Method for measuring the sphericity of nickel-based superalloy powder by scanning electron microscopy$135.00
- YS/T 1492-2021Platinum/titanium dioxide$335.00
- YS/T 1493-2021High-purity platinum chemical analysis method Determination of impurity element content Glow discharge mass spectrometry$500.00
- YS/T 1494-2021High-purity gold chemical analysis method Determination of impurity element content Glow discharge mass spectrometry$315.00
- YS/T 1495-2021High-purity rhodium chemical analysis method Determination of impurity element content Glow discharge mass spectrometry$355.00
- YS/T 1496-2021Palladium compound analysis method Impurity anion content determination Ion chromatography$255.00
- YS/T 1497-2021Platinum compound analysis method Impurity anion content determination Ion chromatography$315.00
- YS/T 1498-2021Rhodium acetate$315.00
- YS/T 1499-2021Tetraplatinum Acetate$195.00
- YS/T 1500-2021Polysilicon preparation of silver plate for furnace lining$185.00
- YS/T 1501-2021Copper-containing precious metal material cuprous oxide metallographic inspection method$135.00
- YS/T 1502-2021Chemical analysis methods for ruthenium compounds - Determination of platinum, palladium, rhodium, iridium, gold, silver, copper, iron, nickel, magnesium, manganese, lead, zinc, calcium, sodium content - Inductively coupled plasma atomic emission spectrometry$385.00
- YS/T 1503-2021Hexahydroxy platinic acid bis(ethanol ammonium) solution$135.00
- YS/T 1504-2021High-purity palladium chemical analysis method -Determination of impurity element content - Glow discharge mass spectrometry$500.00
- YS/T 1505-2021High-purity ruthenium chemical analysis method - Determination of impurity element content Glow discharge mass spectrometry$500.00
- YS/T 1506-2021High-purity iridium chemical analysis method - Determination of impurity element content Glow discharge mass spectrometry$135.00
- YS/T 1507-2021Precious metal materials - Compression creep test method$165.00
- YS/T 1508-2021Palladium evaporation material$165.00
- YS/T 1509.1-2021Chemical analysis methods for silicon-carbon composite anode materials - Part 1: Determination of silicon content gravimetric method and spectrophotometric method$265.00
- YS/T 1509.2-2021Chemical analysis methods for silicon-carbon composite anode materials - Part 2: Determination of carbon content High-frequency heating infrared absorption method$195.00
- YS/T 1509.3-2021Chemical analysis methods for silicon-carbon composite anode materials - Part 3: Determination of iron, nickel, zirconium, calcium, lead, aluminum, and hafnium content. Inductively coupled plasma atomic emission spectrometry$355.00
- YS/T 1510-2021High purity germanium powder$165.00
- YS/T 1511-2021Technical specification for limestone-gypsum desulfurization, defluorination and dust removal of aluminum electrolysis flue gas$325.00
- YS/T 1512.1-2021Methods for chemical analysis of copper smelting fumes - Part 1: Determination of copper content. Flame atomic absorption spectrometry and iodometry$355.00
- YS/T 1512.10-2022Methods for chemical analysis of copper smelting dust - Part 10: Determination of copper, lead, zinc, bismuth, arsenic, indium, silver, cadmium, antimony, calcium, magnesium and iron - Inductively coupled plasma atomic emission spectrometry$515.00
- YS/T 1512.2-2021Methods for chemical analysis of copper smelting fumes - Part 2: Determination of lead content. Flame atomic absorption spectrometry and Na2EDTA titration$325.00
- YS/T 1512.3-2021Chemical analysis methods of copper smelting dust - Part 3: Determination of zinc content. Flame atomic absorption spectrometry and Na2EDTA titration$355.00
- YS/T 1512.4-2021Chemical analysis methods of copper smelting dust - Part 4: Determination of bismuth content. Flame atomic absorption spectrometry and Na2EDTA titration$255.00
- YS/T 1512.5-2021Methods for chemical analysis of copper smelting dust - Part 5: Determination of arsenic content. Ferrous ammonium sulfate titration method$210.00
- YS/T 1512.6-2021Methods for chemical analysis of copper smelting fumes - Part 6: Determination of indium content. Flame atomic absorption spectrometry$210.00
- YS/T 1512.7-2021Methods for chemical analysis of copper smelting fumes - Part 7: Determination of cadmium content. Flame atomic absorption spectrometry and titration$270.00
- YS/T 1512.8-2021Methods for chemical analysis of copper smelting dust - Part 8: Determination of silver and gold content. Flame atomic absorption spectrometry and fire assay$270.00
- YS/T 1512.9-2021Methods for chemical analysis of copper smelting fumes - Part 9: Determination of antimony content. Flame atomic absorption spectrometry$244.00
- YS/T 1513-2021Technical specification for treatment of nitrogen oxides in lead-zinc smelting flue gas$194.00
- YS/T 1514-2021Specification for purification and reuse of steam from zinc hydrometallurgy$214.00
- YS/T 1515-2021Aluminum alloy electrode material for aluminum-air fuel cell$255.00
- YS/T 1516-2022High Purity Nickel Ingot$165.00
- YS/T 1517-2022Fine grain oxygen-free copper strip and foil$225.00
- YS/T 1518-2022Zirconium Ribbons for Hydrogen Fuel Cells$185.00
- YS/T 1519-2022Titanium and titanium alloy stepped shaft forgings$185.00
- YS/T 1520-2022Doped Lithium Nickel Cobalt Manganese Oxide$205.00
- YS/T 1521-2022Lithium Nickel Cobalt Oxide$205.00
- YS/T 1522-2022Nickel-manganese two-element composite oxide$165.00
- YS/T 1523-2022Nickel cobalt aluminum zirconium composite hydroxide$165.00
- YS/T 1524-2022Potassium osmate$285.00
- YS/T 1525-2022Nickel-platinum alloy chemical analysis method for determination of oxygen and nitrogen content - pulse-infrared absorption method and thermal conductivity detection method$185.00
- YS/T 1526-2022Gallium Magnesium Alloy$225.00
- YS/T 1527-2022Indium Magnesium Alloy$225.00
- YS/T 1528-2022Copper alloy Y-shaped zip wire$225.00
- YS/T 1529-2022Crude tellurium dioxide$185.00
- YS/T 1530-2022High-purity tin chemical analysis method - determination of impurity element content - glow - discharge mass spectrometry$385.00
- YS/T 1531-2022Rhodium carbon chemical analysis method - Determination of rhodium content - Inductively coupled plasma atomic emission spectrometry$205.00
- YS/T 1532-2022Metal Injection Molding of Titanium and Titanium Alloy Shaped Parts$135.00
- YS/T 1533-2022indium oxide$135.00
- YS/T 1534-2022Cesium hydroxide monohydrate$135.00
- YS/T 1535-2022Method for determination of recrystallization rate of niobium-titanium alloy rods for superconductivity$305.00
- YS/T 1536-2022Inspection method for interface microstructure of titanium-steel clad plate$165.00
- YS/T 1537.1-2022Methods for Chemical Analysis of Lithium Boron Alloys - Part 1: Determination of Lithium Content - Lithium Sulfate Method$180.00
- YS/T 1538-2022Sintered metal porous materials - Determination of damping properties$135.00
- YS/T 1539-2022Determination of boron nitride content in aluminum-based boron nitride powders by inductively coupled plasma atomic emission spectrometry$165.00
- YS/T 1540-2022Green Factory Evaluation Requirements for Copper and Copper Alloy Pipe Production$385.00
- YS/T 1541-2022Green Factory Evaluation Requirements for Production of Copper and Copper Alloy Plates, Strips and Foils$385.00
- YS/T 1542-2022Green Factory Evaluation Requirements for Production of Copper and Copper Alloy Rods, Shapes and Wires$385.00
- YS/T 1543-2022The Norm of Energy Consumption per Unit Production of Lithium$225.00
- YS/T 1544-2022Evaluation requirements for green factories in tungsten smelting industry$485.00
- YS/T 1545-2022Green Factory Evaluation Requirements for Casting Aluminum Alloy Industry$485.00
- YS/T 1546-2022Molybdenum copper alloy plate$205.00
- YS/T 1547-2022Smelted niobium$135.00
- YS/T 1548-2022Titanium and titanium alloy wire for electronic products$165.00
- YS/T 1549-2022Zirconium hydride$165.00
- YS/T 1550.1-2022Methods for chemical analysis of beryllium alloys - Part 1: Determination of beryllium content - Potassium fluoride titration$165.00
- YS/T 1550.2-2022Methods for chemical analysis of beryllium alloys - Part 2: Determination of silver, cobalt and germanium content - Inductively coupled plasma atomic emission spectrometry$225.00
- YS/T 1550.3-2022Methods for chemical analysis of beryllium alloys - Part 3: Determination of silicon content - Molybdenum blue spectrophotometric method$165.00
- YS/T 1550.4-2022Methods for chemical analysis of beryllium alloys - Part 4: Determination of carbon content - Infrared absorption method$185.00
- YS/T 1550.5-2022Methods for chemical analysis of beryllium alloys - Part 5: Determination of oxygen content - Inert gas fusion infrared absorption method$165.00
- YS/T 1551-2022High strain rate compression test method for titanium alloy at room temperature$385.00
- YS/T 1552-2022Crude lithium carbonate$135.00
- YS/T 1553-2022Titanium diboride powder$135.00
- YS/T 1554-2022Ultrasonic testing methods for tungsten, molybdenum and their alloy rods and tubes$185.00
- YS/T 1555-2022Platinum cobalt chromium boron alloy sputtering target$205.00
- YS/T 1556-2022Silver-steel composite panel$225.00
- YS/T 1557-2022Spherical silver powder for solar cell front paste$325.00
- YS/T 1558-2022High Purity Zirconium Ingot$135.00
- YS/T 1559-2022High Purity Hafnium Oxide$165.00
- YS/T 1560-2022High Purity Niobium Ingot$135.00
- YS/T 1561-2022Tungsten copper alloy plate$225.00
- YS/T 1562.1-2022Methods for chemical analysis of tungsten-copper alloys - Part 1: Determination of copper content by iodometric method and inductively coupled plasma atomic emission spectrometry$165.00
- YS/T 1562.2-2022Methods for Chemical Analysis of Tungsten Copper Alloys - Part 2: Determination of Tungsten Content Cinchonine Gravimetric Method$165.00
- YS/T 1562.3-2022Methods for Chemical Analysis of Tungsten Copper Alloys - Part 3: Determination of Cobalt, Iron, Nickel, Zinc Contents Inductively Coupled Plasma Atomic Emission Spectrometry$240.00
- YS/T 1562.4-2022Methods for chemical analysis of tungsten-copper alloys - Part 4: Determination of carbon content by high-frequency combustion infrared absorption method$165.00
- YS/T 1563.1-2022Methods for Chemical Analysis of Molybdenum-Rhenium Alloys - Part 1: Determination of Rhenium Content by Inductively Coupled Plasma Atomic Emission Spectrometry$165.00
- YS/T 1563.2-2022Methods for Chemical Analysis of Molybdenum-Rhenium Alloys - Part 2: Determination of Molybdenum Content - Lead Molybdate Gravimetric Method$165.00
- YS/T 1563.3-2022Methods for Chemical Analysis of Molybdenum-Rhenium Alloys - Part 3: Determination of Aluminum, Calcium, Copper, Iron, Magnesium, Manganese, Silicon, Titanium Contents - Inductively Coupled Plasma - Atomic Emission Spectrometry$165.00
- YS/T 1563.4-2022Methods for Chemical Analysis of Molybdenum-Rhenium Alloys - Part 4: Determination of Aluminum, Calcium, Copper, Iron, Magnesium, Manganese, Nickel, Tin, Tungsten by Inductively Coupled Plasma Mass Spectrometry$165.00
- YS/T 1563.5-2022Methods for Chemical Analysis of Molybdenum-Rhenium Alloys - Part 5: Determination of Carbon and Sulfur Content - High Frequency Combustion Infrared Absorption Method$165.00
- YS/T 1563.6-2022Methods for Chemical Analysis of Molybdenum-Rhenium Alloys - Part 6: Determination of Oxygen and Nitrogen Content - Inert Gas Fusion - Infrared Absorption and Thermal Conductivity$165.00
- YS/T 1563.7-2022Methods of Chemical Analysis of Molybdenum-Rhenium Alloys - Part 7: Determination of Hydrogen Content Inert Gas Fusion-Infrared Absorption and Thermal Conductivity$165.00
- YS/T 1564-2022Copper clad graphite composite powder$165.00
- YS/T 1565-2022High-purity alumina powder for thermal spraying$135.00
- YS/T 1566-2022Titanium Carbonitride Powder$135.00
- YS/T 1567-2022Niobium Alloy$165.00
- YS/T 1568-2022Battery grade anhydrous lithium hydroxide$135.00
- YS/T 1569.1-2022Lithium nickel manganese oxide methods for chemical analysis - Part 1: Determination of nickel content Diacetyl oxime gravimetric method$165.00
- YS/T 1569.2-2022Lithium Nickel Manganese Oxide Chemical Analysis Methods - Part 2: Determination of Manganese Content Potentiometric Titration$180.00
- YS/T 1569.3-2022Lithium Nickel Manganese Oxide Chemical Analysis Methods - Part 3: Determination of Lithium Content by Flame Atomic Absorption Spectrometry$165.00
- YS/T 1569.4-2022Lithium Nickel Manganese Oxide Chemical Analysis Methods - Part 4: Determination of Sulfate Content - Ion Chromatography$165.00
- YS/T 1569.5-2022Lithium Nickel Manganese Oxide Chemical Analysis Methods - Part 5: Determination of Chloride Ion Content - Ion Selective Electrode Method$165.00
- YS/T 1569.6-2022Lithium Nickel Manganese Oxide Chemical Analysis Methods - Part 6: Determination of Potassium, Sodium, Calcium, Iron, Copper, Chromium and Cadmium by Inductively Coupled Plasma Atomic Emission Spectrometry$435.00
- YS/T 1570-2022Fence type lead alloy clad aluminum core anode plate$285.00
- YS/T 1571-2022Rolled copper foil for high-frequency and high-speed printed circuit boards$225.00
- YS/T 1572-2022Copper alloy seamless coil$205.00
- YS/T 1573-2022stannous oxide$500.00
- YS/T 1574-2022tetraammine platinum(II) bicarbonate$135.00
- YS/T 1575-2022tetraammine palladium acetate$135.00
- YS/T 1576-2022Ruthenium acetate$245.00
- YS/T 1577-2022iridium acetate$225.00
- YS/T 1578-2022Copper and copper alloy seamless tubes - Test method for residual stress - Cutting method$185.00
- YS/T 1579-2022Copper powder for welding consumables$165.00
- YS/T 1580-2022Tin and tin alloy tensile test method$165.00
- YS/T 1581-2022Processing copper and copper alloy flat ingots$225.00
- YS/T 1582.1-2022Methods for chemical analysis of crude antimony - Part 1: Determination of antimony content - Cerium sulfate titration method$180.00
- YS/T 1582.2-2022Methods for chemical analysis of crude antimony - Part 2: Determination of gold content - fire - assay gold gravimetric method$195.00
- YS/T 1582.3-2022Methods for chemical analysis of crude antimony - Part 3: Determination of arsenic, lead, copper, selenium and iron - Inductively coupled plasma atomic emission spectrometry$525.00
- YS/T 1583-2022General requirements for laser marking of cladding tubes$135.00
- YS/T 1584-2022Anhydrous aluminum fluoride$165.00
- YS/T 1585.1-2022Methods for chemical analysis of silver-tungsten alloys - Part 1: Determination of silver content by potentiometric titration$165.00
- YS/T 1585.2-2022Methods for Chemical Analysis of Silver-Tungsten Alloys - Part 2: Determination of Tungsten Content by Cinchonine Gravimetric Method$165.00
- YS/T 1585.3-2022Methods for Chemical Analysis of Silver and Tungsten Alloys - Part 3: Determination of Cobalt, Chromium, Copper, Magnesium, Iron, Potassium, Sodium, Tin, Nickel, Silicon, Zinc by Inductively Coupled Plasma Atomic Emission Spectrometry$165.00
- YS/T 1585.4-2022Methods for chemical analysis of silver-tungsten alloys - Part 4: Determination of carbon content High-frequency induction furnace combustion infrared absorption method$165.00
- YS/T 1585.5-2025Methods for chemical analysis of silver-tungsten alloy - Part 5: Determination of oxygen and nitrogen contents - Inert gas fusion-infrared absorption and thermal conductivity method$165.00
- YS/T 1586-2022Water-saving enterprise Zinc smelting industry$165.00
- YS/T 1587-2022Water-saving enterprises Lead smelting industry$165.00
- YS/T 1588-2022Water intake quota Zinc smelting$135.00
- YS/T 1589-2022Evaluation Requirements for Green Factory in Alumina Industry$385.00
- YS/T 1590-2022Evaluation requirements for green factories in the polysilicon industry$485.00
- YS/T 1591-2023Chromium Oxide Powder for Thermal Spraying$105.00
- YS/T 1592-2023crude lithium chloride$90.00
- YS/T 1593.1-2023Crude Lithium Carbonate Chemical Analysis Methods - Part 1: Determination of Lithium Content - Flame Atomic Absorption Spectrometry$165.00
- YS/T 1593.2-2023Methods for chemical analysis of crude lithium carbonate - Part 2: Determination of nickel, cobalt, manganese, copper, aluminum, iron, calcium, magnesium, sodium, potassium, lead, cadmium, chromium, arsenic, phosphorus contents - Inductively coupled plasm$285.00
- YS/T 1593.3-2023Crude Lithium Carbonate Chemical Analysis Method - Part 3: Determination of Fluoride Ion Content - Ion Selective Electrode Method$165.00
- YS/T 1593.4-2023Crude Lithium Carbonate Chemical Analysis Methods - Part 4: Determination of Anion Content - Ion Chromatography$210.00
- YS/T 1593.5-2023Crude Lithium Carbonate Chemical Analysis Method - Part 5: Determination of Chloride Ion Content - Silver Chloride Turbidimetric Method$165.00
- YS/T 1593.6-2023Crude Lithium Carbonate Chemical Analysis Methods - Part 6: Determination of Acid Insoluble Content - Gravimetric Method$150.00
- YS/T 1594-2023Forged Titanium Alloy Seamless Tube$135.00
- YS/T 1595-2023Molybdenum-copper layered composites for electronic packaging$150.00
- YS/T 1596-2023Salicylhydroxamic acid$120.00
- YS/T 1597-2023Molybdenum tube for thermocouple$90.00
- YS/T 1598-2023Method for Determination of Laser Marking Depth and Heat Affected Zone of Cladding Tube$165.00
- YS/T 1599-2023High-purity zirconium chemical analysis method - Determination of trace impurity elements content - Glow discharge mass spectrometry$135.00
- YS/T 1600-2023Determination of Trace Impurity Element Content in Silicon Carbide Single Crystals by Glow Discharge Mass Spectrometry$165.00
- YS/T 1601-2023Determination of impurity content in hexachlorodisilane - Inductively coupled plasma mass spectrometry$120.00
- YS/T 1602-2023Molybdenum enrichment$90.00
- YS/T 1603.1-2023Chemical analysis methods for tungsten-based high specific gravity alloys - Part 1: Determination of tungsten content - Sinkenin gravimetric method$165.00
- YS/T 1603.2-2023Chemical analysis methods of tungsten-based heavy alloys - Part 2: Determination of iron, nickel and copper content - Inductively coupled plasma atomic emission spectrometry$180.00
- YS/T 1603.3-2023Chemical analysis methods of tungsten-based heavy alloys - Part 3: Determination of aluminum, magnesium and calcium content - Inductively coupled plasma mass spectrometry$165.00
- YS/T 1604-2023Ammonium molybdate chemical analysis method - Determination of molybdenum content - Lead molybdate gravimetric method$120.00
- YS/T 1605.1-2023Chemical analysis methods of roasted molybdenum concentrate - Part 1: Determination of molybdenum content - lead molybdate gravimetric method$180.00
- YS/T 1605.10-2023Methods for chemical analysis of roasted molybdenum concentrates - Part 10: Determination of silicon content - Molybdenum blue spectrophotometric method$150.00
- YS/T 1605.11-2023Methods for chemical analysis of roasted molybdenum concentrates - Part 11: Determination of tungsten content - Inductively coupled plasma atomic emission spectrometry$150.00
- YS/T 1605.12-2023Chemical analysis methods of roasted molybdenum concentrate - Part 12: Determination of carbon and sulfur content - High frequency combustion infrared absorption method$150.00
- YS/T 1605.2-2023Methods for chemical analysis of roasted molybdenum concentrates - Part 2: Determination of ammonia-insoluble molybdenum content - Thiocyanate spectrophotometric method$150.00
- YS/T 1605.3-2023Methods for chemical analysis of roasted molybdenum concentrates - Part 3: Determination of bismuth content - Flame atomic absorption spectrometry and atomic fluorescence spectrometry$210.00
- YS/T 1605.4-2023Methods for chemical analysis of roasted molybdenum concentrates - Part 4: Determination of tin content - Atomic fluorescence spectrometry$150.00
- YS/T 1605.5-2023Chemical analysis methods of roasted molybdenum concentrate - Part 5: Determination of antimony content - Atomic fluorescence spectrometry$150.00
- YS/T 1605.6-2023Chemical analysis methods of roasted molybdenum concentrate - Part 6: Determination of lead and copper content - Flame atomic absorption spectrometry$165.00
- YS/T 1605.7-2023Methods for chemical analysis of roasted molybdenum concentrates - Part 7: Determination of potassium content - Flame atomic absorption spectrometry$150.00
- YS/T 1605.8-2023Chemical analysis methods of roasted molybdenum concentrate - Part 8: Determination of calcium and magnesium content - Flame atomic absorption spectrometry$180.00
- YS/T 1605.9-2023Methods for chemical analysis of roasted molybdenum concentrates - Part 9: Determination of phosphorus content - Molybdenum blue spectrophotometric method$180.00
- YS/T 1606-2023Determination of indium content in indium-rich materials by inductively coupled plasma atomic emission spectrometry$195.00
- YS/T 1607-2023Green factory evaluation requirements for lithium-ion battery cathode material precursor industry$405.00
- YS/T 1608-2023Carbide precision ground round rod$150.00
- YS/T 1609-2023Aluminum silicon alloy powder$120.00
- YS/T 1610-2023Carbide hammer teeth$180.00
- YS/T 1611-2023Battery Grade Lithium Oxalate$90.00
- YS/T 1612-2023Lithium magnesium alloy ingot$105.00
- YS/T 1613.1-2023Methods for chemical analysis of lithium-silicon alloys - Part 1: Determination of lithium content Gravimetric method$150.00
- YS/T 1613.2-2023Methods for chemical analysis of lithium-silicon alloys - Part 2: Determination of iron, nickel and chromium content Inductively coupled plasma atomic emission spectrometry$165.00
- YS/T 1614-2023Doped coated lithium nickel cobalt aluminate$180.00
- YS/T 1615-2023Electrochemical performance test of lithium nickel cobalt manganate DC internal resistance test method$120.00
- YS/T 1616-2023Indium zinc oxide target$105.00
- YS/T 1617.1-2023Methods for chemical analysis of indium oxide - Part 1: Determination of cadmium, cobalt, copper, iron, manganese, nickel, antimony, lead and thallium content - Inductively coupled plasma atomic emission spectrometry$210.00
- YS/T 1617.2-2023Methods for chemical analysis of indium oxide - Part 2: Determination of arsenic content Atomic fluorescence spectrometry$165.00
- YS/T 1618-2023Aluminum alloy extruded bars for automotive forgings$330.00
- YS/T 1619-2023Aluminum alloy ingots for aviation$510.00
- YS/T 1620-2023Magnesium alloy extruded profiles for rail trains$240.00
- YS/T 1621-2023Aluminum alloy strip for automobile sealing strip$165.00
- YS/T 1622-2023Aluminum and aluminum alloy strips for mask nose clips$150.00
- YS/T 1623-2023Inspection of Aging Precipitated Phases of Aluminum Alloys Transmission Electron Microscope Method$450.00
- YS/T 1624-2023Method for evaluating the homogenization effect of aluminum alloy ingots$465.00
- YS/T 1625-2023Crude calcium$285.00
- YS/T 1626-2023Calcium wire blank and wire rod$225.00
- YS/T 1627-2023Magnesia gray dish$285.00
- YS/T 1628-2023High-purity ultra-fine spherical aluminum and aluminum alloy powder$180.00
- YS/T 1629.1-2023Aluminum alloy plates for aviation - Part 1: 7050T7451 plates$285.00
- YS/T 1629.2-2023Aluminum alloy plates for aviation - Part 2: 2024T351, 2H24T351, 2324T39 thick plates$330.00
- YS/T 1629.3-2023Aluminum alloy plates for aviation use - Part 3: 2124T851 aluminum alloy thick plates$225.00
- YS/T 1630.1-2023Aluminum alloy tubes, rods and profiles for aviation use - Part 1: 7050 aluminum alloy profiles$240.00
- YS/T 1631-20232014 and 2219 aluminum alloy forgings for aerospace use$225.00
- YS/T 1632-2023Fluorescent penetrant inspection method for deformed aluminum and aluminum alloy products$315.00
- YS/T 1633-2023Ultrasonic phased array inspection method for deformed aluminum and aluminum alloy products$525.00
- YS/T 1634-2023Residual stress evaluation method for aluminum and aluminum alloy products$330.00
- YS/T 1635-2023Nickel chromium alloy target$150.00
- YS/T 1636-2023High purity copper rings for electronic thin films$150.00
- YS/T 1637-2023Fine tin-based alloy solder powder$150.00
- YS/T 1638-2023Superconducting niobium plate$165.00
- YS/T 1639-2023Titanium-based titanium-manganese alloy composite electrode$105.00
- YS/T 1640-2023Titanium plates and strips for new energy power batteries$150.00
- YS/T 1641-2023Granulated molybdenum powder$120.00
- YS/T 1642-2023Bayer dissolution performance evaluation method of bauxite$180.00
- YS/T 1643-2023Special nickel for electroplating$105.00
- YS/T 1644-2023Nickel anodes for integrated circuit packaging$165.00
- YS/T 1645-2023Zinc lead alloy powder$345.00
- YS/T 1646-2023Amorphous boron powder Determination of total boron content$120.00
- YS/T 1647-2023Electrolytic titanium$150.00
- YS/T 1648-2023Crystalline Hafnium$120.00
- YS/T 1649-2023Aluminum Molybdenum Chromium Master Alloy$105.00
- YS/T 1650-2023Method for determination of surface carbon content of tungsten and tungsten alloy plates$105.00
- YS/T 1651-2023Two-roller cold rolling pass detection method for zirconium alloy pipes$105.00
- YS/T 1652-2023Determination of texture in zirconium and zirconium alloys Electron backscattered diffraction method$105.00
- YS/T 1653-2023Gallium nitride substrate wafer$240.00
- YS/T 1654-2023Chemical analysis method of gallium nitride Determination of trace impurity element content Glow discharge mass spectrometry$165.00
- YS/T 1655-2023Chemical vapor deposition of zinc sulfide crystals$225.00
- YS/T 1656-2023Test method for heat transfer coefficient and resistance characteristics of copper and copper alloy tubes$210.00
- YS/T 1657.1-2023Methods for chemical analysis of high-sulfur slags - Part 1: Determination of sulfur content Combustion-titration method$195.00
- YS/T 1657.2-2023Methods for chemical analysis of high-sulfur slags - Part 2: Determination of silver content Flame atomic absorption spectrometry and fire assay$255.00
- YS/T 1658.1-2023Methods for chemical analysis of crude nickel cobalt hydroxide - Part 1: Determination of nickel content - Dimethylglyoxime gravimetric method$195.00
- YS/T 1658.2-2023Methods for chemical analysis of crude nickel cobalt hydroxide - Part 2: Determination of chromium, phosphorus and manganese contents - Inductively coupled plasma atomic emission spectrometry$240.00
- YS/T 1658.3-2023Methods for chemical analysis of crude nickel cobalt hydroxide - Part 3: Determination of fluorine content - Ion selective electrode method$180.00
- YS/T 1658.4-2023Methods for chemical analysis of crude nickel cobalt hydroxide - Part 4: Determination of copper, aluminum, lithium, zinc, cadmium, lead and arsenic contents - Inductively coupled plasma atomic emission spectrometry$240.00
- YS/T 1658.5-2023Methods for chemical analysis of crude nickel cobalt hydroxide - Part 5: Determination of moisture content - Gravimetric method$165.00
- YS/T 1658.6-2023Methods for chemical analysis of crude nickel cobalt hydroxide - Part 6: Determination of insoluble substance in hydrochloric acid - Gravimetric method$180.00
- YS/T 1658.7-2023Methods for chemical analysis of crude nickel cobalt hydroxide - Part 7: Determination of manganese content - Potentiometric titration method$210.00
- YS/T 1659-2023Corrosion-resistant brass forged rods and cakes for ships$150.00
- YS/T 1660-2023High temperature resistant softened copper alloy wire$210.00
- YS/T 1661-2023Platinum/aluminum oxide$270.00
- YS/T 1662-2023Specification for packaging of spent precious metal catalysts$150.00
- YS/T 1663-2023Silver sulfate$120.00
- YS/T 1664-2023Silver oxide$210.00
- YS/T 1665.1-2023Methods for chemical analysis of silver-nickel graphite - Part 1: Determination of silver content - Sodium chloride potentiometric titration method$150.00
- YS/T 1665.2-2023Methods for chemical analysis of silver-nickel graphite - Part 2: Determination of nickel content Diacetyl oxime precipitation and separation-Na2EDTA complex back titration method$180.00
- YS/T 1665.3-2023Methods for chemical analysis of silver-nickel graphite - Part 3: Determination of total carbon content Gas volumetric method and high-frequency combustion-infrared absorption method$195.00
- YS/T 1666-2023Regenerated alumina raw material$225.00
- YS/T 1667-2023Green factory evaluation requirements for the deformed aluminum ingot industry$375.00
- YS/T 1668-2023Green factory evaluation requirements for the aluminum foil industry$330.00
- YS/T 1669-2023Technical Specifications for Energy Management Center of Nonferrous Metal Mining Enterprises$165.00
- YS/T 1670-2023Technical Specifications for Recycling of Nonferrous Metals from Waste Electrical Equipment$165.00
- YS/T 1671-2023Technical specifications for comprehensive recovery of arsenic resources from arsenic-containing soot$150.00
- YS/T 1672-2023Brass melting and casting by-product copper and zinc enrichment$180.00
- YS/T 1673-2023Determination of copper, iron, sulfur, silica, arsenic, lead, zinc, antimony, bismuth, nickel, calcium oxide and magnesium oxide in copper smelting slag by wavelength dispersive X-ray fluorescence spectrometry$210.00
- YS/T 1674-2023Silver iodide$150.00
- YS/T 1675-2023Etched copper and copper alloy foil$180.00
- YS/T 1676-2023Copper alloy sheath strip$165.00
- YS/T 1677-2023Silver chloride$165.00
- YS/T 1678-2023Copper and copper alloy plates, strips and foils Residual stress inspection methods Etching striping method$120.00
- YS/T 1679-2023Analysis methods for tin and tin alloys Photoelectric direct reading spectrometry$225.00
- YS/T 1680-2023On-line slag content detection method for deformed aluminum and aluminum alloy melts$90.00
- YS/T 1681-2023Off-line slag content detection method for deformed aluminum and aluminum alloy melts$435.00
- YS/T 1682-2024Green plant evaluation requirements for magnesium smelting industry$405.00
- YS/T 1683-2024Chromium-titanium alloy sputtering target for magnetic recording$210.00
- YS/T 1684-2024Double pass titanium nickel shape memory alloy wire$210.00
- YS/T 1685-2024Spherical titanium alloy powder for hot isostatic pressing in aerospace$210.00
- YS/T 1686.1-2024(Chemical analysis methods for antimony glycol: - Part 1: Determination of antimony content$210.00
- YS/T 1686.2-2024(Chemical analysis methods for antimony glycolate: - Part 2: Determination of arsenic content$210.00
- YS/T 1687-2024Green factory evaluation requirements for the aluminum alloy building profile industry$480.00
- YS/T 1688-2024Green factory evaluation requirements for the wrought aluminum and aluminum alloy plate and strip industry$560.00
- YS/T 1689-2024Green factory evaluation requirements for the deformed aluminum and aluminum alloy tubes, bars and profiles industry$405.00
- YS/T 1690-2024Green factory evaluation requirements for magnesium and magnesium alloy sheet and strip industry$330.00
- YS/T 1691-2024Green factory evaluation requirements for aluminum prebaked anode industry$405.00
- YS/T 1692-2024Green factory evaluation requirements for the aluminum cathode industry$480.00
- YS/T 1693-2024Technical Specifications for Energy Saving Diagnosis in Copper Smelting Enterprises$405.00
- YS/T 1694-2024Technical specification for energy-saving diagnosis in lead smelting enterprises$405.00
- YS/T 1695-2024Technical Specifications for Energy Saving Diagnosis in Zinc Smelting Enterprises$405.00
- YS/T 1696-2024Water quota for lead and zinc ore dressing$120.00
- YS/T 1697-2024Green factory evaluation requirements for tin and tin alloy production$480.00
- YS/T 1698-2024Green factory evaluation requirements for zinc alloy industry$480.00
- YS/T 1699-2024Green factory evaluation requirements for titanium ingot smelting industry$330.00
- YS/T 1700-2024Green Factory Evaluation Requirements for Silver Mining and Dressing Industry$560.00
- YS/T 1701-2024Evaluation requirements for green factories for precious metal smelting$405.00
- YS/T 1702-2024Green Factory Evaluation Requirements for Germanium Industry$480.00
- YS/T 1703-2024Testing of surface particles on wafer packaging boxes - Liquid particle counting method$90.00
- YS/T 1704-2024Recycled tungsten raw materials$240.00
- YS/T 1705-2024Technical Specifications for Recycling Nonferrous Metals from Waste Air Conditioners$105.00
- YS/T 1706-2024Lead-bismuth alloy ingots, a by-product of smelting$150.00
- YS/T 1708-2024Greenhouse gas emissions accounting and reporting requirements - Silicon polycrystalline production enterprises$450.00
- YS/T 1709-2024Technical Specifications for Energy Management Center of Silicon Polycrystalline Enterprises$240.00
- YS/T 1710-2024Energy Management System Implementation Guidelines for the Silicon Polycrystalline Industry$270.00
- YS/T 1711-2024Indium Tin Oxide Target Binding Technical Specifications$120.00
- YS/T 1712-2024Copper alloy hollow profiles for fasteners$180.00
- YS/T 1713-2024Copper rods and wire blanks for mineral insulated cables$165.00
- YS/T 1714-2024Beryllium copper wire for connectors$225.00
- YS/T 1715-2024Indium and indium alloy strips and foils$135.00
- YS/T 1716-2024High strength and high conductivity copper-iron alloy rod and wire$180.00
- YS/T 1717-2024Copper-based precision resistance alloy - Brand and chemical composition$165.00
- YS/T 1718-2024Copper-iron alloy refined ingot$210.00
- YS/T 1719-2024Copper and copper alloy strips and foils - Test method for elastic bending limit$180.00
- YS/T 1720-2025Aluminum alloy sheets and strips for automotive body panels$1,205.00
- YS/T 1721-2025Copper-clad aluminum wire for aircraft$270.00
- YS/T 1722-2025Oxygen-free copper tape for copper clad ceramic substrate$165.00
- YS/T 1723-2025Cu-nickel-cobalt-silicon alloy strip foil$165.00
- YS/T 1724-2025Special-shaped lead-tin bronze rod for supercharger thrust bearings$150.00
- YS/T 1725-2025Vanadium and vanadium alloy target materials$135.00
- YS/T 1726-2025High-purity tungsten trioxide$120.00
- YS/T 1727-2025High-purity titanium sputtering ring$135.00
- YS/T 1728-2025High-purity tungsten powder$135.00
- YS/T 1729-2025Molybdenum alloy target material$135.00
- YS/T 1730-2025Molybdenum-tungsten alloy plate$135.00
- YS/T 1731-2025Inspection Method for Metallographic Microstructure of Aluminum and Aluminum Alloys in Wrought Products$165.00
- YS/T 1732-2025Lithium tetrafluoroborate$165.00
- YS/T 1733-2025Quantitative analysis method for the microstructure of titanium alloys$240.00
- YS/T 1734-2025Test method for bonding strength of titanium metal composite plate$120.00
- YS/T 1735-2025Nickel-clad tungsten carbide composite powder$135.00
- YS/T 1736-2025Silver powder for thermal spraying$135.00
- YS/T 1737-2025Integrated solid carbide high-speed cutting tool$135.00
- YS/T 1738-2025Tungsten Carbide Powder for Casting - Determination of Impurity Elements - Inductively-Coupled Plasma Atomic Emission Spectrometric Method$165.00
- YS/T 1739-2025Silver carbonate$135.00
- YS/T 1740-2025Evaluation method for chemical vapor deposition of electronic grade trichlorosilane$85.00
- YS/T 1741-2025Silicon nitride products for polysilicon reduction reactors$135.00