Search JB/T
500 JB/T standards in English, from JB/T 2001.26-1999 to JB/T 2848-2006, in code order.
- JB/T 2001.26-1999Water systems - Manual gate valve cores (PN 20 MPa, 31.5 MPa)$85.00
- JB/T 2001.27-1999Water systems - Manual gate valves (PN 31.5 MPa)$55.00
- JB/T 2001.28-1999Water systems - Manual gate valves (PN 20 MPa)$85.00
- JB/T 2001.29-1999Water systems - Hydraulic gate valve cores (PN 20 MPa and 31.5 MPa)$89.00
- JB/T 2001.3-1999Water systems - Guide sleeves - Types and dimensions$89.00
- JB/T 2001.30-1999Water systems - Hydraulic gate valves (PN 31.5 MPa)$85.00
- JB/T 2001.31-1999Water systems - Hydraulic gate valves (PN 20 MPa)$90.00
- JB/T 2001.32-1999Water systems - Screw plug type check valve cores (PN 20 MPa, 31.5 MPa)$85.00
- JB/T 2001.33-1999Water systems - Flanged check valve cores (PN 20 MPa and 31.5 MPa)$25.00
- JB/T 2001.34-1999Water systems - Check valves (PN 31.5 MPa)$85.00
- JB/T 2001.35-1999Water systems - Check valves (PN 20 MPa)$85.00
- JB/T 2001.36-1999Water systems - Prefill valve cores (PN 20 MPa, 31.5 MPa)$85.00
- JB/T 2001.37-1999Water systems - Prefill valve actuators (type A) (PN 31.5 MPa)$90.00
- JB/T 2001.38-1999Water systems - Prefill valves - Servomotors (type A) (PN 20 MPa)$85.00
- JB/T 2001.39-1999Water systems - Prefill valves (PN 31.5 MPa)$90.00
- JB/T 2001.4-1999Water systems - Support rings for U-type fabric rubber seals - Types and dimensions$90.00
- JB/T 2001.40-1999Water systems - Prefill valves (PN 20 MPa)$40.00
- JB/T 2001.41-1999Water systems - Overflow valves (PN 0.4 MPa, 0.8 MPa, 1.2 MPa)$85.00
- JB/T 2001.42-1999Water systems - Prefill tanks$90.00
- JB/T 2001.43-1999Water systems - Two-valve distributors (PN 20 MPa and 31.5 MPa)$55.00
- JB/T 2001.44-1999Water systems - Four-valve distributors (PN 20 MPa and 31.5 MPa)$55.00
- JB/T 2001.45-1999Water systems - Four-valve distributors (with servomotor) (PN 20 MPa, 31.5 MPa)$85.00
- JB/T 2001.46-1999Water systems - Air charging valves for pump stations (PN 20 MPa, 31.5 MPa)$85.00
- JB/T 2001.47-1999Water systems - Air shut-off valve cores for pump stations (PN 20 MPa and 31.5 MPa)$40.00
- JB/T 2001.48-1999Water systems - Air gate valves for pump stations (PN 31.5 MPa)$85.00
- JB/T 2001.49-1999Water systems - Air gate valves for pump stations (PN 20 MPa)$85.00
- JB/T 2001.5-1999Water systems - Copper flange gaskets - Types and dimensions$85.00
- JB/T 2001.50-1999Water systems - Cylindrical accumulator water vessels for pump stations (PN 31.5 MPa)$90.00
- JB/T 2001.51-1999Water systems - Cylindrical accumulator air tanks for pump stations (PN 31.5 MPa)$85.00
- JB/T 2001.52-1999Water systems - Cylindrical accumulator water vessels for pump stations (PN 20 MPa)$40.00
- JB/T 2001.53-1999Water systems - Cylindrical accumulator air vessels for pump stations (PN 20 MPa)$90.00
- JB/T 2001.54-1999Water systems - Spherical accumulator water tanks for pump stations (PN 31.5 MPa)$85.00
- JB/T 2001.55-1999Water systems - Spherical accumulator air vessels for pump stations - Types and dimensions (PN 31.5 MPa)$85.00
- JB/T 2001.56-1999Water systems - Spherical accumulator water vessels for pump stations (PN 20 MPa)$25.00
- JB/T 2001.57-1999Water systems - Spherical accumulator air vessels for pump stations - Types and dimensions (PN 20 MPa)$85.00
- JB/T 2001.58-1999Water systems - Water level indicators for pump stations$40.00
- JB/T 2001.59-1999Water systems - Minimum level valve cores for pump stations (PN 20 MPa and 31.5 MPa)$25.00
- JB/T 2001.6-1999Water systems - Oval attachment flanges - Types and dimensions (PN 31.5 MPa)$85.00
- JB/T 2001.60-1999Water systems - Minimum level valves for pump stations (PN 31.5 MPa)$85.00
- JB/T 2001.61-1999Water systems - Minimum level valves for pump stations (PN 20 MPa)$90.00
- JB/T 2001.62-1999Water systems - Solenoid distributors for pump stations (PN 20 MPa and 31.5 MPa)$40.00
- JB/T 2001.63-1999Water systems - Filters for pump stations (PN 31.5 MPa)$25.00
- JB/T 2001.64-1999Water systems - Filters for pump stations (PN 20 MPa)$55.00
- JB/T 2001.65-1999Water systems - Emulsion mixing tanks for pump stations - Types and dimensions$25.00
- JB/T 2001.66-1999Water systems - Water tanks for pump stations - Types and dimensions$40.00
- JB/T 2001.67-1999Water systems - Water tank supports for pump stations - Types and dimensions$25.00
- JB/T 2001.68-1999Water systems - Single pipe clamps - Types and dimensions$225.00
- JB/T 2001.69-1999Water systems - Follow-up rotary valves DN15$55.00
- JB/T 2001.7-1999Water systems - Square attachment flanges - Types and dimensions (PN 31.5 MPa)$85.00
- JB/T 2001.70-1999Water systems - Oil pressure drive units$85.00
- JB/T 2001.71-1999Water systems - Oil pressure actuators - Types and dimensions$85.00
- JB/T 2001.72-1999Water systems - Water pressure actuators - Types and dimensions$40.00
- JB/T 2001.73-1999Water systems - 45° buttress threads - Thread profile and basic dimensions$85.00
- JB/T 2001.74-1999Water systems - Nuts - Types and dimensions$85.00
- JB/T 2001.8-1999Water systems - Round flanges - Types and dimensions (PN 31.5 MPa)$89.00
- JB/T 2001.9-1999Water systems - Square flanges - Types and dimensions (PN 20 MPa)$25.00
- JB/T 2093-1999Hot billet shears - Basic parameters$169.00
- JB/T 2093-2010Hot shears - Basic parameters$115.00
- JB/T 2094-1999Hot saws - Basic parameters$169.00
- JB/T 2094-2010Hot saw basic parameters$115.00
- JB/T 2094-2024Hot Saw Machine$225.00
- JB/T 2095-1999Roller straightening machines for sections - Basic parameters$249.00
- JB/T 2095-2010Roller straighteners for sections - Basic parameters$85.00
- JB/T 2098-1999Single-arm stamping hydraulic presses - Types and basic parameters$209.00
- JB/T 2098-2010Open-side stamping hydraulic presses - Types and basic parameters$70.00
- JB/T 2099-1977Welded pipe fitting nipples$175.00
- JB/T 2104-1991Hydraulic jack$85.00
- JB/T 2104-2002Hydraulic jacks - Technical requirements$85.00
- JB/T 2122-1977Ferritic malleable cast iron - Metallography$165.00
- JB/T 2161-1991Drum-type external filtration vacuum filters$209.00
- JB/T 2161-2007External filtering drum vacuum filters$105.00
- JB/T 2162-1991Metallurgical equipment hydraulic cylinder. Type and size$510.00
- JB/T 2162-2007Hydraulic cylinders for metallurgical equipment (PN up to 16 MPa)$175.00
- JB/T 2167-1999Disappearing filament optical pyrometers$135.00
- JB/T 2171-1999Aluminium conductor plastic insulated plastic sheathed direct burial wires for agricultural use of rated voltages up to and including 450/750 V$115.00
- JB/T 2171-2016Field (agricultural) buried cables of rated voltages 0.6/1 kV$275.00
- JB/T 2179-1999Rotary combination switches$165.00
- JB/T 2179-2006Rotary switches$195.00
- JB/T 2184-1977Hydraulic components - Type designation method$435.00
- JB/T 2184-2007Hydraulic components - Type designation method$145.00
- JB/T 2190-1993Manhole and headhole devices for boilers$169.00
- JB/T 2191-1993Handhole devices for boilers$354.00
- JB/T 2192-1993Square cast iron economizers - Technical specifications$135.00
- JB/T 2195-1998YDF2 series three-phase asynchronous motors for electric valve actuators - Technical specifications$329.00
- JB/T 2195-2011Specification for YDF2 series three-phase induction motor applying to electromotion device of valve$165.00
- JB/T 2197-1996Electrical insulating materials - Product classification, naming and type designation method$135.00
- JB/T 2198-1999ZKK series amplidynes - General technical specifications$255.00
- JB/T 2198-2014General Specification for ZKK Series Amplidyne$355.00
- JB/T 2203-1999Spring loaded safety valves - Face-to-face dimensions$209.00
- JB/T 2203-2013Spring loaded safety valve - Center-to-face dimensions$149.00
- JB/T 2203-2025Spring-loaded Safety Valves - Structural Length$210.00
- JB/T 2205-2000Pressure reducing valves - Face-to-face dimensions$169.00
- JB/T 2205-2013Pressure reducing valves - Face-to-face dimensions$129.00
- JB/T 2205-2026Pressure reducing valve - Face-to-face dimensions$90.00
- JB/T 2216-1999Hydraulic presses for pole coils - Types and basic parameters$165.00
- JB/T 2221-199116 mm motion picture projector film gates - Dimensions$165.00
- JB/T 2224-2000Technical requirements for large three-phase four-pole AC synchronous motors$135.00
- JB/T 2224-2018Technical requirements for large three-phase four-pole synchronous motors$255.00
- JB/T 2231.1-1999Reciprocating piston compressor parts - Part 1: Outside diameters of shafts and pins$169.00
- JB/T 2231.1-2013Reciprocating Piston Compressor Part-subassembly - Part 1: External Diameters of Shaft and Pin$95.00
- JB/T 2231.2-1999Reciprocating piston compressor parts - Part 2: Cylinder diameters$169.00
- JB/T 2231.2-2013Reciprocating Piston Compressor Part-subassembly - Part 2: Cylinder Diameters$95.00
- JB/T 2231.3-1999Parts and components of reciprocating piston compressors - Part 3: Thin-walled bearing shells$630.00
- JB/T 2231.3-2011Parts of reciprocating piston compressors - Part 3: Thin-walled bearing shells$570.00
- JB/T 2231.4-1999Reciprocating piston compressor parts - Part 4: Ring valve plates$135.00
- JB/T 2231.4-2013Parts of reciprocating piston compressors - Part 4: Metal ring valve plates$105.00
- JB/T 2231.5-1999Reciprocating piston compressor parts - Part 5: Mounting dimensions of valves$249.00
- JB/T 2231.5-2013Reciprocating Piston Compressor Part-subassembly - Part 5: Overall Dimensions for Valve Assembly$85.00
- JB/T 2236-1991Connecting rod small end bushings for reciprocating piston compressors$329.00
- JB/T 2236-2005Reciprocating piston compressors - Connecting rod small end bushes$105.00
- JB/T 2236-2020Reciprocating piston compressors - Connecting rod small end bushes$210.00
- JB/T 2254-1985Jig boring machines - Accuracy$730.00
- JB/T 2254.1-2011Jig boring machines - Part 1: Testing of the accuracy$449.00
- JB/T 2254.2-2007Jig boring machines - Part 2: Technical requirements$85.00
- JB/T 2254.3-2014Jig boring machines - Part 3: Dimension of main shaft end of 3:20 taper hole$85.00
- JB/T 2254.4-2013Jig boring machines - Part 4: Types and parameters$149.00
- JB/T 2255.1-1999Rotary tables for jig boring machines - Testing of accuracy$195.00
- JB/T 2255.1-2015Rotary tables for jig boring machines - Part 1: Testing of the accuracy$349.00
- JB/T 2255.2-1999Rotary tables for jig boring machines - Technical specifications$90.00
- JB/T 2255.2-2013Turntables for jig boring machines - Part 2: Technical requirements$120.00
- JB/T 2257.1-1992Press brakes - Technical specifications$105.00
- JB/T 2257.1-2014Press brakes - Part 1: Technical requirements$145.00
- JB/T 2257.2-1999Press brakes - Types and basic parameters$85.00
- JB/T 2257.2-2025Sheet metal bending machine - Part 2: Type and Basic Parameters$234.00
- JB/T 2257.3-1999Press brakes - Terminology$355.00
- JB/T 2259-1993Double Rotor Impact Crusher$209.00
- JB/T 2259-2005Double rotor impact crushers$105.00
- JB/T 2259-2017Double rotor impact crushers$115.00
- JB/T 2274-1991Flow display instrument$225.00
- JB/T 2274-2014Flow display instruments$534.00
- JB/T 2290-1993Marine low-voltage contactors and AC motor starters$1,180.00
- JB/T 2290-2007Low-voltage contactors and AC motor starters for ships$570.00
- JB/T 2290-2020Low-voltage contactors and AC motor starters for ships$455.00
- JB/T 2291-1978Radiator cores for automobiles and tractors - Structural types and dimension series$85.00
- JB/T 2293-1978Wind tunnel test method for radiators of automobiles and tractors$135.00
- JB/T 2294-1999Axial AC exhaust fans$285.00
- JB/T 2298-2001Double-chain drawbenches$135.00
- JB/T 2298-2014Dual-chain Drawbench$145.00
- JB/T 2300-1999Slewing bearings$1,764.00
- JB/T 2300-2011Slewing bearings$550.00
- JB/T 2300-2018Slewing bearings$500.00
- JB/T 2301-1999Lubrication equipment - Helical gear oil pumps and devices - Types, parameters and dimensions$309.00
- JB/T 2302-1999Duplex basket strainers - Types, parameters and dimensions$85.00
- JB/T 2302-2022Duplex basket strainers - Types, parameters and dimensions$150.00
- JB/T 2304-2001Electric lubrication pump units - Types, parameters and dimensions (20 MPa)$70.00
- JB/T 2304-2018Electric lubrication pump units - Types, parameters and dimensions (20 MPa)$90.00
- JB/T 2306-1999Single-line grease pumps and units - Types, parameters and dimensions$149.00
- JB/T 2306-2018Single-line grease pumps and units - Types, parameters and dimensions$110.00
- JB/T 2316-1992Constant pressure brush holders$169.00
- JB/T 2322-1993Horizontal lathes - Technical specifications$249.00
- JB/T 2322-2025General purpose parallel lathes - Specifications$120.00
- JB/T 2322.1-2002Horizontal lathes - Performance test methods$345.00
- JB/T 2322.2-2006Horizontal lathes - Part 2: Technical requirements$135.00
- JB/T 2322.3-2006Horizontal lathes - Part 3: Parameters$169.00
- JB/T 2322.3-2011Horizontal lathes - Part 3: Types and parameters$189.00
- JB/T 2326-1994Machine tool accessories - Type designation method$445.00
- JB/T 2326-2005Machine tool accessories - Type designation method$620.00
- JB/T 2329-1996Machine vices$475.00
- JB/T 2329-2011Machine vices$449.00
- JB/T 2330-1993Internal combustion engine high phosphorus cast iron cylinder liners - Metallographic examination$409.00
- JB/T 2361-1992Constant pressure brush holders$270.00
- JB/T 2361-2007Constant pressure brush holders$285.00
- JB/T 2369-1993Reading microscopes$209.00
- JB/T 2369-2024Reading microscope$120.00
- JB/T 2376-1978Capacitance graded transformer bushings - Types and dimensions$225.00
- JB/T 2378-1993Planetary transmission scraper rock machine$169.00
- JB/T 2378-2004Planetary gear driven scraper rock loaders$85.00
- JB/T 2378-2015Planetary gear rake-bucket rock loaders$129.00
- JB/T 2379-1993Metal tubular electric heating elements$155.00
- JB/T 2379-2016Metallic tube type electroheating elements$419.00
- JB/T 2390-1984Counterbalanced forklift trucks - Basic parameters$169.00
- JB/T 2390-2005Counterbalanced fork-lift trucks - Basic parameters$179.00
- JB/T 2391-19940.5 t to 10 t counterbalanced lift trucks - Technical specifications$249.00
- JB/T 2391-2007500 kg to 10 000 kg counterbalanced fork-lift trucks - Technical requirements$85.00
- JB/T 2391-2017500 kg to 10 000 kg rider-controlled counterbalanced fork-lift trucks$255.00
- JB/T 2397-1999Sintering machines$135.00
- JB/T 2397-2010Straight-line sintering machines$115.00
- JB/T 2397-2024Belt sintering machine$225.00
- JB/T 2400-1992Spline shaft milling machine. Parameters$195.00
- JB/T 2403.1-1996Roll forging machines - Parameters$169.00
- JB/T 2403.1-2012Forging rolls - Part 1: Parameters$129.00
- JB/T 2403.2-1996Roll forging machines - Accuracy$169.00
- JB/T 2403.2-2012Forging rolls - Part 2: Accuracy$85.00
- JB/T 2403.3-1996Roll forging machines - Technical specifications$249.00
- JB/T 2403.3-2012Forging roll machine - Part 3: Specifications$135.00
- JB/T 2409-1999Rotors and timing gears of screw compressors - Basic parameters and dimensions$105.00
- JB/T 2409-2015Rotors and timing gears of screw compressors - Basic parameters and dimensions$135.00
- JB/T 2423-1999Power semiconductor devices - Type designation method$135.00
- JB/T 2423-2026Power semiconductor devices - Method of type designation$165.00
- JB/T 2426-1992Three-phase auxiliary transformers for power plants and substations - Technical parameters and requirements$265.00
- JB/T 2426-2004Technical parameters and requirements for three-phase station service transformers$345.00
- JB/T 2426-2016Specification and technical requirements for three-phase station service transformers$435.00
- JB/T 2428-2017Tachometer hour meters for tractors$285.00
- JB/T 2428.1-1994Magnetic induction tachometer hour meters for tractors and internal combustion engines$289.00
- JB/T 2428.1-2007Specifications of speed and hour meters for motor vehicles and internal-combustion engine. Part 1: Magnetic inductive meters$255.00
- JB/T 2428.2-1994Magneto-electric tachometer hour meters for tractors and internal combustion engines$135.00
- JB/T 2428.2-2007Specifications of speed and hour meters for motor vehicles and internal-combustion engine. Part 2: Electromagnetic meters$255.00
- JB/T 2435-1978Symbols and representation methods for foundry processes$345.00
- JB/T 2435-2013Foundry process symbols and representation methods$240.00
- JB/T 2436.1-1992Copper compression terminals for conductors - Part 1: Copper compression terminals for conductors of 0.5 mm2 to 6.0 mm2$485.00
- JB/T 2436.1-2020Copper compression terminals for conductors - Part 1: Copper compression terminals for 0.5 mm2 to 6.0 mm2 conductors$485.00
- JB/T 2436.2-1994Copper compression terminals for conductors - Part 2: Copper compression terminals for conductors of 10 mm2 to 300 mm2$205.00
- JB/T 2436.2-2020Copper compression terminals for conductors - Part 2: Copper compression terminals for 10 mm2 to 300 mm2 conductors$255.00
- JB/T 2440-1991Discharge counters for surge arresters$169.00
- JB/T 2443-1999External filtering drum permanent magnetic vacuum filters$105.00
- JB/T 2443-2010Outside filtering drum permanent magnet vacuum filters$85.00
- JB/T 2444-1999Seat-type double-shaft vibrating screens for coal$329.00
- JB/T 2444-2008Base-mounted double-shaft vibrating screens for coal$105.00
- JB/T 2445-1999Sieve bends for coal$209.00
- JB/T 2445-2015Fixed sieve bends$149.00
- JB/T 2446-1992Dewatering screen bars for coal$85.00
- JB/T 2446-2026Dewatering bar for coal$105.00
- JB/T 2447-1992Slotted screen plates for coal (bar-inserted type)$85.00
- JB/T 2447-2025Coal Slotted Screen Plate (Strip-Through Type)$204.00
- JB/T 2449-2001Large symmetrical three-roll plate bending machines$205.00
- JB/T 2449-2024Large symmetrical three-roller plate rolling machine$210.00
- JB/T 2450-1999Slag pot cars - Types, basic parameters and dimensions$289.00
- JB/T 2450-2010Slag pot cars - Types, basic data and dimensions$85.00
- JB/T 2451-1999Ingot mould cars - Types, basic parameters and dimensions$285.00
- JB/T 2452-1999Charging trough cars - Types, basic parameters and dimensions$205.00
- JB/T 2452-2010Furnace charge transport cars - Types, basic data and dimensions$115.00
- JB/T 2453-1999Hot metal ladle cars - Types, basic parameters and dimensions$115.00
- JB/T 2453-2010Hot metal ladle cars - Types, basic data and dimensions$229.00
- JB/T 2462.1-1999General-purpose units for modular machine tools - Multi-spindle turret units - Parameters and dimensions$209.00
- JB/T 2462.1-2015Modular units for modular machine tools - Part 1: Multi-spindle turret power units - Parameters and dimensions$149.00
- JB/T 2462.10-1999General-purpose units for modular machine tools - Single-spindle tapping units - Parameters and dimensions$40.00
- JB/T 2462.10-2017Modular units for modular machine tools - Part 10: Single-spindle tapping heads - Parameters and dimensions$95.00
- JB/T 2462.11-1999General-purpose units for modular machine tools - Multi-spindle drilling heads - Parameters and dimensions$55.00
- JB/T 2462.11-2017Modular units for modular machine tools - Part 11: Multi-spindle drilling heads - Parameters and dimensions$85.00
- JB/T 2462.12-1999General-purpose units for modular machine tools - Multi-spindle tapping units - Parameters and dimensions$55.00
- JB/T 2462.12-2017Modular units for modular machine tools - Part 12: Multi-spindle tapping heads - Parameters and dimensions$85.00
- JB/T 2462.13-1999General-purpose units for modular machine tools - Circular bases - Dimensions$149.00
- JB/T 2462.13-2017Modular units for modular machine tools - Part 13: Rotary table bases - Dimensions$75.00
- JB/T 2462.14-1999General-purpose units for modular machine tools - Floor-type centre bases - Dimensions$149.00
- JB/T 2462.14-2017Modular units for modular machine tools - Part 14: Floor-type intermediate bases - Dimensions$75.00
- JB/T 2462.15-1999General-purpose units for modular machine tools - Side supports (radial type) - Dimensions$85.00
- JB/T 2462.15-2025Modular units for modular machine tools - Part 15: Side support (radial) - Dimensions$210.00
- JB/T 2462.16-1999General-purpose units for modular machine tools - Polygonal centre bases - Parameters and dimensions$89.00
- JB/T 2462.16-2025Modular units for modular machine tools - Part 16: Polygonal middle column - Parameters and dimensions$85.00
- JB/T 2462.17-1999General-purpose units for modular machine tools - Bases - Dimensions$85.00
- JB/T 2462.17-2025Modular units for modular machine tools - Part 17: Base - Dimensions$85.00
- JB/T 2462.18-1999General-purpose units for modular machine tools - Adjustable supports - Dimensions$89.00
- JB/T 2462.18-2025Modular units for modular machine tools - Part 18: Adjustable support - Dimensions$90.00
- JB/T 2462.19-1999General-purpose units for modular machine tools - Fixed supports - Dimensions$85.00
- JB/T 2462.19-2025Modular units for modular machine tools - Part 19: Anchor support - Dimensions$85.00
- JB/T 2462.2-1999General-purpose units for modular machine tools - Multi-spindle turret boxes - Parameters and dimensions$169.00
- JB/T 2462.2-2015Modular units for modular machine tools - Part 2: Multi-spindle turret power case - Parameters and dimensions$129.00
- JB/T 2462.20-1999General-purpose units for modular machine tools - Columns (for long table slides) - Dimensions$90.00
- JB/T 2462.20-2025Modular units for modular machine tools - Part 20: Column (for slide with long table surface) - Dimensions$90.00
- JB/T 2462.21-1999General-purpose units for modular machine tools - Compound columns - Dimensions$90.00
- JB/T 2462.21-2025Modular units for modular machine tools - Part 21: Combination - Dimensions$90.00
- JB/T 2462.22-1999General-purpose units for modular machine tools - Pneumatic units - Parameters and dimensions$90.00
- JB/T 2462.22-2025Modular units for modular machine tools - Part 22: Pneumatic power head- Date - Dimensions$90.00
- JB/T 2462.23-1999General-purpose units for modular machine tools - Adjustable cylindrical supports for pneumatic units - Parameters and dimensions$79.00
- JB/T 2462.23-2025Modular units for modular machine tools - Part 23: Adjustable cylindrical support for pneumatic power head - Parameters and dimension$90.00
- JB/T 2462.24-1999General-purpose units for modular machine tools - Single-spindle drilling heads - Dimensions$85.00
- JB/T 2462.24-2025Modular units for modular machine tools - Part 24: Single drill head - Dimensions$105.00
- JB/T 2462.25-1999General-purpose units for modular machine tools - Single-spindle milling heads - Dimensions$90.00
- JB/T 2462.25-2025Modular units for modular machine tools - Part 25: Single milling head - Dimensions$105.00
- JB/T 2462.26-1999General-purpose units for modular machine tools - Single-spindle boring and facing heads - Dimensions$90.00
- JB/T 2462.26-2025Modular units for modular machine tools - Part 26: Single boring and face-turning head - Dimensions$120.00
- JB/T 2462.27-1999General-purpose units for modular machine tools - Facing heads - Dimensions$90.00
- JB/T 2462.27-2025Modular units for modular machine tools - Part 27: Face-turning plate - Dimensions$85.00
- JB/T 2462.28-1999General-purpose units for modular machine tools - Multi-station moving tables - Dimensions$90.00
- JB/T 2462.28-2025Modular units for modular machine tools - Part 28: Multi-station travelling table - Dimensions$90.00
- JB/T 2462.3-1999General-purpose units for modular machine tools - Single-spindle turret units - Parameters and dimensions$169.00
- JB/T 2462.3-2015Modular units for modular machine tools - Part 3: Single-spindle turret power units - Parameters and dimensions$149.00
- JB/T 2462.4-1999General-purpose units for modular machine tools - Drive shafts for single-spindle turret units - Parameters and dimensions$169.00
- JB/T 2462.4-2015Modular units for modular machine tools - Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions$129.00
- JB/T 2462.5-1999General-purpose units for modular machine tools - Drilling spindles for single-spindle turret units - Parameters and dimensions$169.00
- JB/T 2462.5-2015Modular units for modular machine tools - Part 5: Drilling spindles for single-spindle turret power units - Parameters and dimensions$129.00
- JB/T 2462.6-1999General-purpose units for modular machine tools - Boring spindles for single-spindle turret units - Parameters and dimensions$169.00
- JB/T 2462.6-2015Modular units for machine tool construction - Part 6: Boring spindles for single-spindle turret power units - Parameters and dimensions$129.00
- JB/T 2462.7-1999General-purpose units for modular machine tools - Milling spindles for single-spindle turret units - Parameters and dimensions$169.00
- JB/T 2462.7-2015Modular units for machine tool construction - Part 7: Milling spindles for single-spindle turret power units - Parameters and dimensions$129.00
- JB/T 2462.8-1999General-purpose units for modular machine tools - Slides (long table type) - Parameters and dimensions$40.00
- JB/T 2462.8-2017Modular units for modular machine tools - Part 8: Slide units (long table type) - Parameters and dimensions$85.00
- JB/T 2462.9-1999General-purpose units for modular machine tools - Cross slides - Parameters and dimensions$40.00
- JB/T 2462.9-2017Modular units for modular machine tools - Part 9: Cross feed units - Parameters and dimensions$95.00
- JB/T 2474-1999Hydraulic screw presses - Basic parameters$85.00
- JB/T 2474-2018Hydraulic screw presses - Basic parameters$55.00
- JB/T 2476-1999Multi-roll cold tube rolling mills - Main parameters$169.00
- JB/T 2476-2014Main Specifications of Multi-roll Cold Tube Mill$95.00
- JB/T 2477-1999Two-roll cold pilger mills - Main parameters$169.00
- JB/T 2477-2014Main Specifications of Two-roll Cold Tube Mill$109.00
- JB/T 2478-1999Explosive charging machines$249.00
- JB/T 2478-2012Explosive chargers$105.00
- JB/T 2486-1984Conical straight-sided involute splines$365.00
- JB/T 2494-2006Fine pitch gear hobs$165.00
- JB/T 2494.1-1994Small module gear hob. The basic types and sizes$195.00
- JB/T 2494.2-1994Small module gear hob. Technical conditions$195.00
- JB/T 2500-1992JQH type pneumatic winches$219.00
- JB/T 2500-1997Pneumatic winches$209.00
- JB/T 2500-2015Pneumatic winches$219.00
- JB/T 2501-2000Single cylinder hydraulic cone crusher$85.00
- JB/T 2501-2008Single cylinder hydraulic cone crusher$105.00
- JB/T 2501-2017Single-cylinder hydraulic cone crushers$145.00
- JB/T 2523.1-1997Floor-type lathes - Technical specifications$249.00
- JB/T 2523.1-2006Floor-type lathes - Part 1: Technical requirements$105.00
- JB/T 2523.2-1999Floor-type lathes - Parameters$169.00
- JB/T 2523.2-2011Floor-type lathes - Part 2: Types and parameters$109.00
- JB/T 2523.3-1999Floor-type lathes - Series type spectrum$205.00
- JB/T 2523.3-2011Floor-type lathes - Part 3: Testing of the accuracy$485.00
- JB/T 2523.4-1999Floor-type lathes - Testing of accuracy$510.00
- JB/T 2547-1991Double disk friction press parameters$195.00
- JB/T 2547.1-1999Friction screw press. Technical requirements$205.00
- JB/T 2547.1-2007Double-disc friction screw presses - Part 1: Technical requirements$205.00
- JB/T 2547.2-2010Friction screw press - Part 2: Basic parameter$115.00
- JB/T 2548.1-1996Bed-type milling machines - Parameters$169.00
- JB/T 2548.1-2011Bed-type milling machines - Part 1: Types and parameters$149.00
- JB/T 2548.2-1996Bed-type milling machines - Technical specifications$249.00
- JB/T 2548.2-2006Bed-type milling machines - Part 2: Technical requirements$105.00
- JB/T 2548.3-1999Bed-type milling machines - Series spectrum$365.00
- JB/T 2549-1994Aluminium air separation plants - Technical specification for manufacture$135.00
- JB/T 2549-2018Specifications for manufacturing aluminum air separation plants$435.00
- JB/T 2555-1979Manholes and handholes of carbon steel and low-alloy steel - Classification and technical specifications$315.00
- JB/T 2560-1991Solid lined plain bearing housings - Types and dimensions$169.00
- JB/T 2560-2007Solid lined plain bearing housings - Types and dimensions$145.00
- JB/T 2561-1991Split two-bolt plain bearing housings - Types and dimensions$169.00
- JB/T 2561-2007Split two-bolt plain bearing housings - Types and dimensions$145.00
- JB/T 2562-1991Split four-bolt plain bearing housings - Types and dimensions$169.00
- JB/T 2562-2007Split four-bolt plain bearing housings - Types and dimensions$130.00
- JB/T 2563-1991Split four-bolt inclined plain bearing housings - Types and dimensions$165.00
- JB/T 2563-2007Split four-bolt angled plain bearing housings - Types and dimensions$70.00
- JB/T 2564-1991Plain bearing housings - Technical specifications$165.00
- JB/T 2564-2007Plain bearing housings - Technical requirements$85.00
- JB/T 2571-2013Technical Requirements for Package of Electric Tools$149.00
- JB/T 2589-1999Positive displacement compressors - Type designation method$279.00
- JB/T 2589-2015Displacement compressors - Type designation method$199.00
- JB/T 2592-1991QL screw jacks$135.00
- JB/T 2592-2008Screw jacks$105.00
- JB/T 2592-2017Screw jacks$195.00
- JB/T 2599-1993Lead-acid batteries - Product type designation method$169.00
- JB/T 2599-2012Naming and type designation method for lead-acid batteries$85.00
- JB/T 2602-2001Construction machinery - Assembled track assemblies$115.00
- JB/T 2602-2016Construction machinery - Assembled track assemblies$195.00
- JB/T 2603-1994Electric single-girder underslung cranes$409.00
- JB/T 2603-2008Electric suspension cranes$195.00
- JB/T 2603-2024Electric under slung cranes$300.00
- JB/T 2604-1994Electromagnetic vibrating feeders - Technical specifications$365.00
- JB/T 2606-1993Rail-mounted shuttle mine cars$239.00
- JB/T 2606-2017Rail-mounted shuttle mine cars$169.00
- JB/T 2617.1-1999Crankshaft grinding machines - Parameters$169.00
- JB/T 2617.1-2014Crankshaft Grinder - Part 1: Types and Parameters$110.00
- JB/T 2617.2-1999Crankshaft grinding machines - Testing of accuracy$175.00
- JB/T 2617.2-2017Crankshaft grinding machines - Part 2: Testing of the accuracy$360.00
- JB/T 2617.3-1999Crankshaft grinding machines - Technical specifications$169.00
- JB/T 2617.3-2007Crankshaft grinding machines - Part 3: Technical requirements$105.00
- JB/T 2617.3-2017Crankshaft grinding machines - Part 3: Specifications$169.00
- JB/T 2617.4-2014Crankshaft grinding machines - Part 4: Heavy duty machine tools with wheelhead carriage longitudinal travel - Testing of the accuracy$360.00
- JB/T 2623-1994Brushes for electrical machines - Dimensions and structural types$175.00
- JB/T 2623-2006Dimensions and structural types of brushes for electrical machines$225.00
- JB/T 2626-1992Power system relays - Letter symbols for electrical technology commonly used in relay protection and automation devices$475.00
- JB/T 2626-2004Letter symbols for electrical technology for relays, protection and automation equipment of power systems$315.00
- JB/T 2627-1991Hard plastic pipe extrusion auxiliary$209.00
- JB/T 2627-2008Downstream equipment for plastics pipe extrusion$105.00
- JB/T 2628-1999Rack-type pushers for reheating furnaces in rolling mills - Basic parameters$169.00
- JB/T 2628-2010Rack-type pushers for reheating furnaces in rolling mills - Basic parameters$100.00
- JB/T 2629-1979Truck cranes and wheel cranes - Technical specifications$330.00
- JB/T 2634-1993Formed and welded pipe fittings - Technical specifications$95.00
- JB/T 2635-1993Boiler membrane wall panels (rolled finned tubes) - Technical specifications$165.00
- JB/T 2636-1994Metallographic and fracture examination methods for welded joints of boiler pressure parts$55.00
- JB/T 2637-1993Pressure-retaining ductile iron castings for boilers - Technical specifications$95.00
- JB/T 2638-1993Rotary air preheaters - Technical specifications$165.00
- JB/T 2639-1993Pressure-retaining grey iron castings for boilers - Technical specifications$85.00
- JB/T 2644-1991Rolling bearings - Class B tapered roller bearings for jig boring machine spindles - Technical specifications$55.00
- JB/T 2644-2002Rolling bearings - Tolerance class 2 tapered roller bearings for jig boring machine spindles - Technical requirements$85.00
- JB/T 2645-1991Rolling bearings - Parts related to class B tapered roller bearings for jig boring machine spindles - Technical requirements$165.00
- JB/T 2646-1992Single-rope drum winding mine hoists$249.00
- JB/T 2647-1995Belt conveyors - Technical specifications for packaging$85.00
- JB/T 2647-2026Belt conveyors-technical specifications for packaging$120.00
- JB/T 2648.1-1995Blades for bulldozers, scrapers and graders - Main shapes and basic dimensions$209.00
- JB/T 2648.2-1995Blades for bulldozers, scrapers and graders - Technical specifications$165.00
- JB/T 2648.3-1995Bulldozers, scrapers and graders - Bolts for blades$169.00
- JB/T 2650-2000Slip rings and brush rockers for large AC machines$209.00
- JB/T 2650-2026Collector ring and brush rocker for large alternating current machine$240.00
- JB/T 2656-1991Rolling Wheel Mixer, rolling wheel rotor mixer basic parameters$169.00
- JB/T 2656-2007Muller sand mixers and muller rotor sand mixers - Basic parameters$130.00
- JB/T 2657.1-1999DI-150, SS-150, DI-153 and SS-153 type contact synchros - Technical specifications$225.00
- JB/T 2657.2-1999BD and BS series brushless synchros - Technical specifications$355.00
- JB/T 2657.3-1999ND, NS, NED, DN, DI, SS and TS type contact synchros$465.00
- JB/T 2661-1999ZCF series DC tachogenerators - Technical specifications$145.00
- JB/T 2661-2015Specification for ZCF series direct current tachogenerators$439.00
- JB/T 2663-1999ADP series AC servo motors - Technical specifications$315.00
- JB/T 2664.1-1999Carbon pile resistors for voltage regulators - Carbon pile resistors for automatic voltage regulators$169.00
- JB/T 2664.1-2010Carbon pile resistor columns for voltage regulators - Part 1: Columns for automatic voltage regulators$149.00
- JB/T 2664.2-1999Carbon pile resistors for voltage regulators - Carbon pile resistors for special voltage regulators$115.00
- JB/T 2664.2-2010Carbon pile resistor columns for voltage regulators - Part 2: Columns for special voltage regulators$105.00
- JB/T 2671.1-1998Pipe bending machines - Parameters$115.00
- JB/T 2671.1-2025Tube bending machine - Part 1: parameters$90.00
- JB/T 2671.2-1998Pipe bending machines - Technical specifications$105.00
- JB/T 2671.2-2025Tube bending machine - Part 2: Specifications$210.00
- JB/T 2671.3-2010Tube bending machines - Part 3: Testing of the accuracy$90.00
- JB/T 2672-1999General-purpose woodworking lathes - Parameters$169.00
- JB/T 2672-2010Lathes for woodworking - Parameters$115.00
- JB/T 2682-1993Woodworking surface planers - Parameters$169.00
- JB/T 2682.1-2010Surface planing machines for woodworking - Part 1: Parameters$95.00
- JB/T 2682.2-2014Surface planing machines for woodworking - Part 2: Technical requirements$149.00
- JB/T 2683-1993Single-sided woodworking thickness planers - Parameters$169.00
- JB/T 2683.1-2010Thickness planing machines with rotary cutterblock for one-side dressing - Part 1: Parameters$95.00
- JB/T 2683.2-2014Single-side woodworking thickness planers - Part 2: Technical requirements$149.00
- JB/T 2703-1999Micro permanent magnet DC screwdrivers$85.00
- JB/T 2703-2013Micro permanent magnet DC screwdrivers$269.00
- JB/T 2707-1999Shockless jolt squeeze moulding machines - Types and basic parameters$70.00
- JB/T 2707-2015Squeeze molding machine - Types and basic parameters$89.00
- JB/T 2712-1999Modular machine tools - Workpiece transfer bars for transfer lines - Pitch$169.00
- JB/T 2712-2011Modular machine tools - Workpiece conveyors for automatic lines - Pitch dimensions$109.00
- JB/T 2726-1996Polyimide film$165.00
- JB/T 2727-1993Vertical multistage barrel-type centrifugal pumps - Types and basic parameters$325.00
- JB/T 2728.1-1996Gas coolers for electrical machines - General requirements$155.00
- JB/T 2728.1-2008Gas coolers for electrical machines - Part 1: General rules$319.00
- JB/T 2728.1-2017Gas coolers for electrical machines - Part 1: General rules$135.00
- JB/T 2728.2-1996Gas coolers for electrical machines - Technical requirements for wire-wound gas coolers$169.00
- JB/T 2728.2-2008Gas coolers for electrical machines - Part 2: Technical requirements for plate-fin gas coolers$199.00
- JB/T 2728.2-2017Gas coolers for electrical machines - Part 2: Technical requirements for plate-fin gas coolers$95.00
- JB/T 2728.3-1996Gas coolers for electrical machines - Technical requirements for wound-fin gas coolers$169.00
- JB/T 2728.3-2008Gas coolers for electrical machines - Part 3: Technical requirements for extruded-fin gas coolers$125.00
- JB/T 2728.4-1996Gas coolers for electrical machines - Technical requirements for extruded-fin gas coolers$169.00
- JB/T 2728.4-2008Gas coolers for electrical machines - Part 4: Technical requirements for wound-fin gas coolers$125.00
- JB/T 2728.5-1996Gas coolers for electrical machines - Technical requirements for threaded-fin gas coolers$169.00
- JB/T 2728.5-2008Gas coolers for electrical machines - Part 5: Technical requirements for wire-wound gas coolers$125.00
- JB/T 2729-1999Three-phase four-pole plugs and sockets for AC mobile power stations$135.00
- JB/T 2729-2020Three-phase four-pole plugs and sockets for AC mobile power stations$240.00
- JB/T 2732.1-1994Open-side planing machines and double-column planing machines - Accuracy$449.00
- JB/T 2732.1-2011Cantilever and double column planing machines - Part 1: Types and parameters$129.00
- JB/T 2732.2-1994Open-side planing machines and double-column planing machines - Technical specifications$169.00
- JB/T 2732.2-2008Cantilever and double column planing machines - Part 2: Testing of the accuracy$225.00
- JB/T 2732.3-1999Openside and double column planers - Parameters$169.00
- JB/T 2732.3-2006Cantilever and double column planing machines - Part 3: Technical requirements$105.00
- JB/T 2732.4-1999Open-side planing machines and double-column planing machines - Series spectrum$245.00
- JB/T 2739-1996Graphical symbols for electrical diagrams of industrial machines$650.00
- JB/T 2739-2008Graphical symbols for electrical diagrams of industrial machines$950.00
- JB/T 2739-2015Machine electrical Graphical symbols$169.00
- JB/T 2740-1996Electrical equipment of industrial machines - Preparation of electrical diagrams, charts and tables$770.00
- JB/T 2740-2008Electrical equipment of industrial machines - Preparation of electrical diagrams, charts and tables$920.00
- JB/T 2740-2015Electrical equipment and system of machine tools - Drawing of electrical diagrams, illustration and table$635.00
- JB/T 2750-1991High purity graphite$169.00
- JB/T 2750-2006High purity graphite$55.00
- JB/T 2750-2020High purity graphite$120.00
- JB/T 2751-1993Plasma arc cutting machine$329.00
- JB/T 2751-2004Plasma arc cutting machines$135.00
- JB/T 2755-1980Sulfite pulp waste liquor binders for foundry use$175.00
- JB/T 2756-1993Carbon contact strips for trolleybuses$169.00
- JB/T 2756-2006Carbon slide strips for trolleybuses$55.00
- JB/T 2765-1981Valves - Terminology$749.00
- JB/T 2766-1992PN 16.0 to 32.0 MPa forged high-pressure valves - Face-to-face dimensions$90.00
- JB/T 2768-1992PN 16.0 to 32.0 MPa pipes, fittings and valves - End dimensions$169.00
- JB/T 2768-2010Valve components - End dimensions of high pressure pipes, fittings and valves$149.00
- JB/T 2768-2026Components of valve - High pressure pipes, fittings and end-to-end dimensions of valves$165.00
- JB/T 2769-1992PN 16.0 to 32.0 MPa threaded flanges$169.00
- JB/T 2769-2008Valve components - High pressure threaded flanges$55.00
- JB/T 2770-1992PN 16.0 MPa to 32.0 MPa union nuts$169.00
- JB/T 2771-1992PN 16.0 MPa to 32.0 MPa unions$169.00
- JB/T 2772-1992PN 16.0 to 32.0 MPa blind flanges$169.00
- JB/T 2772-2008Valve components - High pressure blind plates$55.00
- JB/T 2773-1992PN 16.0 MPa to 32.0 MPa studs$55.00
- JB/T 2774-1992PN 16.0 MPa to 32.0 MPa stepped studs and tapped hole dimensions$55.00
- JB/T 2775-1992PN 16.0 MPa to 32.0 MPa nuts$55.00
- JB/T 2776-1992PN 16.0 MPa to 32.0 MPa lens gaskets$169.00
- JB/T 2776-2010Components of valves - High pressure lens gaskets$145.00
- JB/T 2777-1992PN 16.0 to 32.0 MPa blind lens gaskets$169.00
- JB/T 2778-1992PN 16.0 to 32.0 MPa pipe fittings and fasteners - Temperature marking$169.00
- JB/T 2778-2008Valve components - Temperature marking of high pressure pipe fittings and fasteners$55.00
- JB/T 2781-1991Miniature ball bearings - Technical specifications$249.00
- JB/T 2781-2005Rolling bearings - Miniature ball bearings - Technical requirements$85.00
- JB/T 2781-2015Rolling bearings - Miniature ball bearings - Technical requirements$199.00
- JB/T 2783-1992Gas turbines - Type designation method$85.00
- JB/T 2784-1979Crawler bulldozers - Types and basic parameters$159.00
- JB/T 2785-1994Mining locomotive. Types and basic parameters$245.00
- JB/T 2785-2010Industrial and mining diesel locomotives$205.00
- JB/T 2785-2025Industrial diesel locomotive$240.00
- JB/T 2789-1994Bicable circulating freight aerial ropeways - Carriers - Types and basic parameters$55.00
- JB/T 2790-1994Circulating freight aerial ropeways - Deflection sheaves - Types and basic parameters$85.00
- JB/T 2792-1994Circulating freight aerial ropeways - Tensioning devices for haul ropes and track ropes - Types and basic parameters$55.00
- JB/T 2793-1994Bicable circulating freight aerial ropeways - Rocking saddles - Types and basic parameters$55.00
- JB/T 2798-1999Iron-based powder metallurgy sintered products - Metallographic standard$145.00
- JB/T 2800-1992Knee-type milling machines - Technical specifications$209.00
- JB/T 2800.1-1999Knee-type milling machines - Parameters$169.00
- JB/T 2800.1-2011Knee-type milling machines - Part 1: Types and parameters$129.00
- JB/T 2800.2-2006Knee-type milling machines - Part 2: Technical requirements$105.00
- JB/T 2800.2-2021Knee-type milling machines - Part 2: Technical requirements$185.00
- JB/T 2800.3-2011Knee-type milling machines - Part 3: Static rigidity$149.00
- JB/T 2814-1993Slot series modular fixture components classification numbering rules$195.00
- JB/T 2825.1-1999Slotting machines - Parameters$165.00
- JB/T 2825.1-2011Slotting machines - Part 1: Parameters$129.00
- JB/T 2825.2-1999Slotting machines - Series type spectrum$209.00
- JB/T 2825.3-2006Slotting machines - Part 3: Testing of the accuracy$105.00
- JB/T 2825.4-2006Slotting machines - Part 4: Technical requirements$105.00
- JB/T 2832-1993Governors and oil pressure supply units for hydraulic turbines - Type designation method$169.00
- JB/T 2832-2004Type designation method for governors and oil pressure units of hydraulic turbines$209.00
- JB/T 2833-1992Ventilation duct channel steel$165.00
- JB/T 2834-2000Tooth support plates$205.00
- JB/T 2839-1992RAA type brush holders and slip rings$169.00
- JB/T 2839-2005Brush holders and slip rings for electrical machines$105.00
- JB/T 2839-2016Brush holder and slip-ring for motor application$149.00
- JB/T 2841-1993Controlled atmosphere generators - Basic technical specifications$105.00
- JB/T 2847-1999Multi-piston high-pressure moulding machines - Types and basic parameters$85.00
- JB/T 2847-2015Multi-piston high-pressure moulding machines - Basic parameters$89.00
- JB/T 2848-1994Core shooting machine$289.00
- JB/T 2848-2006Core shooting machines$105.00
All JB/T ranges
- JB/T 74-1994 – JB/T 2001.25-1999
- JB/T 2001.26-1999 – JB/T 2848-2006
- JB/T 2848-2022 – JB/T 3411.42-1999
- JB/T 3411.43-1999 – JB/T 3929-2008
- JB/T 3941-1999 – JB/T 4254-2016
- JB/T 4255-1999 – JB/T 5111.2-1991
- JB/T 5111.2-2015 – JB/T 5363-2025
- JB/T 5364-1991 – JB/T 5734-1991
- JB/T 5734-2025 – JB/T 6005-1992
- JB/T 6006-1992 – JB/T 6237.3-1992
- JB/T 6237.3-2008 – JB/T 6439-2026
- JB/T 6440-1992 – JB/T 6703.1-2000
- JB/T 6703.2-2007 – JB/T 6954-1993
- JB/T 6954-2007 – JB/T 7187.4-1995
- JB/T 7187.5-1995 – JB/T 7414.2-2006
- JB/T 7415.1-1994 – JB/T 7626-1994
- JB/T 7626-2013 – JB/T 7764-1995
- JB/T 7765-1995 – JB/T 7948.8-2017
- JB/T 7948.9-1995 – JB/T 8080-1999
- JB/T 8081-1995 – JB/T 8223.3-1999
- JB/T 8223.4-1999 – JB/T 8386.2-1996
- JB/T 8386.2-2014 – JB/T 8629-2006
- JB/T 8630-1997 – JB/T 8846.1-2001
- JB/T 8846.1-2020 – JB/T 9098-2005
- JB/T 9098-2025 – JB/T 9274-2026
- JB/T 9275-1999 – JB/T 9559-1999
- JB/T 9559-2016 – JB/T 9836-2000
- JB/T 9837-1999 – JB/T 10080.1-2000
- JB/T 10080.1-2011 – JB/T 10326-2002
- JB/T 10326-2026 – JB/T 10633-2006
- JB/T 10634-2006 – JB/T 10963-2010
- JB/T 10964-2010 – JB/T 11365-2013
- JB/T 11366-2013 – JB/T 11782-2014
- JB/T 11783.1-2014 – JB/T 12200-2015
- JB/T 12201-2015 – JB/T 12628-2016
- JB/T 12629-2016 – JB/T 13071.2-2017
- JB/T 13071.3-2017 – JB/T 13522-2018
- JB/T 13523-2018 – JB/T 13944-2020
- JB/T 13945-2020 – JB/T 14422-2023
- JB/T 14423-2023 – JB/T 14889-2024
- JB/T 14890-2024 – JB/T 15385-2025
- JB/T 15386-2025 – JB/T 50001-1999
- JB/T 50002-1999 – JB/T 53325-1999
- JB/T 53326-1999 – JB/T 58800-1999