Search JB/T
500 JB/T standards in English, from JB/T 3411.43-1999 to JB/T 3929-2008, in code order.
- JB/T 3411.43-1999Drifts - Dimensions$60.00
- JB/T 3411.44-1999Pin extractors - Dimensions$65.00
- JB/T 3411.45-1999Arbors for shell hand reamers - Dimensions$60.00
- JB/T 3411.46-1999Jaws for flaring thin-wall tubes - Dimensions$65.00
- JB/T 3411.47-1999Pliers for external circlips - Dimensions$65.00
- JB/T 3411.48-1999Pliers for internal circlips - Dimensions$65.00
- JB/T 3411.49-1999C-clamps - Dimensions$60.00
- JB/T 3411.5-1999Parting tool holders - Dimensions$65.00
- JB/T 3411.50-1999Two-jaw pullers - Dimensions$65.00
- JB/T 3411.51-1999Three-jaw pullers - Dimensions$65.00
- JB/T 3411.52-1999Hammer heads - Dimensions$65.00
- JB/T 3411.53-1999Copper hammer heads - Dimensions$60.00
- JB/T 3411.54-1999Dividers - Dimensions$65.00
- JB/T 3411.55-1999Long dividers - Dimensions$80.00
- JB/T 3411.56-1999Box angle plates - Dimensions$65.00
- JB/T 3411.57-1999Marking-out height gauge stands - Dimensions$65.00
- JB/T 3411.58-1999Jacks - Dimensions$65.00
- JB/T 3411.59-1999Jacks with interchangeable head - Dimensions$65.00
- JB/T 3411.6-1999Square bars for 90° internal turning - Dimensions$65.00
- JB/T 3411.60-1999V-blocks for marking out - Dimensions$60.00
- JB/T 3411.61-1999Two-sided V-blocks with clamp - Dimensions$65.00
- JB/T 3411.62-1999Four-sided V-blocks with clamp - Dimensions$65.00
- JB/T 3411.63-1999Wing nuts - Dimensions$65.00
- JB/T 3411.64-1999Scribers - Dimensions$60.00
- JB/T 3411.65-1999Surface gauges - Dimensions$65.00
- JB/T 3411.66-1999Large surface gauges - Dimensions$65.00
- JB/T 3411.67-1999Reducing sleeves for taper shank tools - Dimensions$149.00
- JB/T 3411.68-1999Extension sleeves for taper shank tools - Dimensions$149.00
- JB/T 3411.69-1999Guided extension sleeves for taper shank tools - Dimensions$40.00
- JB/T 3411.7-1999Square bars for 45° internal turning - Dimensions$65.00
- JB/T 3411.70-1999Collets for straight shank tools - Dimensions$90.00
- JB/T 3411.71-1999Collets for taps - Dimensions$90.00
- JB/T 3411.72-1999Drift wedges for tanged taper shanks - Dimensions$60.00
- JB/T 3411.73-1999Extension bars for drill chucks - Dimensions$65.00
- JB/T 3411.74-1999Extension bars for straight shank drills - Dimensions$65.00
- JB/T 3411.75-1999Morse taper shank extension bars for taps - Dimensions$90.00
- JB/T 3411.76-1999Straight shank extension bars for taps - Dimensions$65.00
- JB/T 3411.77-1999Tool bars for blade-type counterbores - Dimensions$90.00
- JB/T 3411.78-1999Back counterboring tool bars - Dimensions$70.00
- JB/T 3411.79-1999Quick-change sleeves for taper shank tools - Dimensions$65.00
- JB/T 3411.8-1999Round bars for 90° internal turning - Dimensions$65.00
- JB/T 3411.80-1999Quick-change sleeves for taps - Dimensions$65.00
- JB/T 3411.81-1999Safety chucks for taps - Dimensions$65.00
- JB/T 3411.82-1999Holders for tap safety chucks - Dimensions$60.00
- JB/T 3411.83-1999Taper shank 90° boring bars - Dimensions$70.00
- JB/T 3411.84-1999Taper shank axially clamped 90° boring bars - Dimensions$89.00
- JB/T 3411.85-1999Taper shank 45° boring bars - Dimensions$65.00
- JB/T 3411.86-1999Taper shank 60° boring bars - Dimensions$65.00
- JB/T 3411.87-1999Taper shank bayonet boring and reaming bars - Dimensions$89.00
- JB/T 3411.88-1999Taper shank bayonet boring and reaming bars for blind holes - Dimensions$65.00
- JB/T 3411.89-1999Taper shank boring and reaming bars - Dimensions$115.00
- JB/T 3411.9-1999Round bars for 45° internal turning - Dimensions$65.00
- JB/T 3411.90-1999Centring taper screws - Dimensions$60.00
- JB/T 3411.91-1999Adjustable boring heads with taper shank - Dimensions$65.00
- JB/T 3411.92-1999Adjustable boring heads with 7:24 taper shank - Dimensions$65.00
- JB/T 3411.93-1999Adjustable boring heads with interchangeable taper shank - Dimensions$89.00
- JB/T 3411.94-1999Floating extension bars - Dimensions$89.00
- JB/T 3411.95-1999Reducing extension bars - Dimensions$65.00
- JB/T 3411.96-1999Grooving tool bars - Dimensions$90.00
- JB/T 3411.97-1999End milling arbors for boring machines - Dimensions$65.00
- JB/T 3411.98-1999Tool blocks for radial tool holders - Dimensions$65.00
- JB/T 3411.99-1999Boring bars for tool blocks - Dimensions$65.00
- JB/T 3489-1991Quick-change chucks$249.00
- JB/T 3489-2007Quick change chucks$85.00
- JB/T 3548-1991R12, R22 and R502 thermostatic expansion valves for refrigeration$115.00
- JB/T 3548-2013Thermostatic refrigerant expansion valves$165.00
- JB/T 3550.1-1999Cylinder boring machines - Parameters$165.00
- JB/T 3550.2-1999Cylinder boring machines - Testing of accuracy$165.00
- JB/T 3550.3-1999Cylinder boring machines - Technical specifications$165.00
- JB/T 3550.4-1999Cylinder boring machines - Spindle noses$205.00
- JB/T 3555-1993Woodworking band sawmills and carriages - Technical specifications$169.00
- JB/T 3555.1-1999Woodworking band sawmills and carriages - Accuracy$249.00
- JB/T 3556-1999Modular machine tools - Rotary tables - Testing of accuracy$115.00
- JB/T 3556-2011Modular machine tools - Rotating table - Testing of the accuracy$189.00
- JB/T 3564-1992Borehole shaft driven centrifugal pumps - Types and basic parameters$165.00
- JB/T 3564-2006Shaft-driven centrifugal borehole pumps - Types and basic parameters$55.00
- JB/T 3565-1992Line-shaft centrifugal deep well pumps - Efficiency$165.00
- JB/T 3565-2006Shaft-driven centrifugal borehole pumps - Efficiency$55.00
- JB/T 3566.1-1999Circulating material ropeways - Rope support rollers - Technical specifications$40.00
- JB/T 3566.2-1999Circulating material ropeways - Drive units - Technical specifications$70.00
- JB/T 3566.3-1999Circulating material ropeways - Deflection sheaves - Technical specifications$40.00
- JB/T 3566.4-1999Circulating material ropeways - Haul rope tensioning devices - Technical specifications$40.00
- JB/T 3566.5-1999Monocable circulating material ropeways - Carriers - Technical specifications$55.00
- JB/T 3567-1999High-voltage insulators - Radio interference test method$85.00
- JB/T 3568-1999Thermal-mechanical performance test method for cap and pin insulator units$165.00
- JB/T 3573-1993Rolling bearings - Measuring and evaluating methods for radial internal clearance$209.00
- JB/T 3573-2004Rolling bearings - Methods for measurement of radial internal clearance$105.00
- JB/T 3574-1992Rolling bearings - Product marking$209.00
- JB/T 3574-1997Rolling bearings - Product marking$209.00
- JB/T 3576-1999Rock drilling machinery and pneumatic tools - General technical specifications for rust prevention$285.00
- JB/T 3576-2010General specification for rust prevention of rock drilling machines and pneumatic tools$85.00
- JB/T 3578-1991Sliding rail epoxy coating material. Technology General$209.00
- JB/T 3578-2007General technical rules for epoxy coating materials for sliding guideways$85.00
- JB/T 3579-1991Epoxy coated slide rail. General technical requirements$169.00
- JB/T 3579-2007General technical requirements for epoxy-coated sliding guideways$130.00
- JB/T 3580-1998Live centres$365.00
- JB/T 3580-2011Live centres$195.00
- JB/T 3581-1999Automatic spring coiling machines - Technical specifications$85.00
- JB/T 3581-2017Automatic spring coiling machines - Technical requirements$115.00
- JB/T 3582-1999Hydraulic die forging hammers with micro-movable anvil - Basic parameters$115.00
- JB/T 3582-2025Die forging hammer of tremble anvil block - Basic parameters$150.00
- JB/T 3583-1992Diamond fine grinding pellets$249.00
- JB/T 3583-2006Superabrasive products - Diamond finishing pellets$105.00
- JB/T 3583-2020Superabrasive products - Diamond finishing pellets$90.00
- JB/T 3584-1999Superabrasives - Determination of bulk density$245.00
- JB/T 3584-2012Superabrasive - Testing method of bulk density$105.00
- JB/T 3584-2025Superabrasive - Determination method for bulk density$105.00
- JB/T 3585-1996Rotary inductosyns - Basic parameters and technical requirements$169.00
- JB/T 3585.1-1996Inductosyns - Terminology$209.00
- JB/T 3585.1-2013Inductive Synchronizer - Part 1: Terms$85.00
- JB/T 3585.2-1996Inductosyns - Types and basic dimensions$145.00
- JB/T 3585.2-2013Inductive Synchronizer - Part 2: Model and Basic Size$195.00
- JB/T 3586-1996Rotary inductosyns - Basic parameters and technical requirements$105.00
- JB/T 3586-2013Basic Parameter and Technical Requirements for Angular Displacement Inductive Synchronizer$85.00
- JB/T 3587-1996Standard and narrow linear inductosyns - Basic parameters and technical requirements$120.00
- JB/T 3587-2013Basic Parameter and Technical Requirements for Standard Linear and Linear Displacement Inductive Synchronizer$85.00
- JB/T 3588-1994Rolling bearings - Full complement needle roller bearings - Boundary dimensions and tolerances$289.00
- JB/T 3588-2007Rolling bearings - Full complement needle roller bearings - Boundary dimensions and tolerances$219.00
- JB/T 3589-1991Automatic cold working machine Precision$169.00
- JB/T 3589-2020Automatic cold headers - Accuracy$105.00
- JB/T 3590-1991Automatic trimming machines - Accuracy$169.00
- JB/T 3592-1993Automatic cold headers for steel balls and rollers - Accuracy$169.00
- JB/T 3592.1-1999Automatic cold headers for steel balls - Basic parameters$169.00
- JB/T 3592.1-2014Ball Automatic Cold Header - Part 1: Basic Parameter$95.00
- JB/T 3593-1999Heat-treated powder metallurgy iron-based structural materials$170.00
- JB/T 3595-1993Power station valves - Technical specifications$550.00
- JB/T 3595-2002Valves for power stations - General requirements$335.00
- JB/T 3596-2001Performance test code for water jet air ejectors$205.00
- JB/T 3596-2017Water jet air ejectors - Performance test code$225.00
- JB/T 3623-1984Metal forming machinery - Noise measurement methods$435.00
- JB/T 3624-1999Modular fixtures - Basic terminology$149.00
- JB/T 3624-2021Modular fixtures - Basic terminology$125.00
- JB/T 3625-1999Modular fixture elements - Technical specifications for rust-preventive packaging$105.00
- JB/T 3625-2019Modular fixture components - Technical requirements for rust-preventive packaging$85.00
- JB/T 3626-1999Modular fixtures - Assembly rules$85.00
- JB/T 3626-2025Universal modular jig and fixture system - Assembly rules$105.00
- JB/T 3627.1-1999Tools and accessories for assembly of modular fixtures - Hexagon socket wrenches$65.00
- JB/T 3627.10-1999Tools and accessories for assembly of modular fixtures - Hollow test bars for boring fixtures$85.00
- JB/T 3627.11-1999Tools and accessories for assembly of modular fixtures - Connecting plates$70.00
- JB/T 3627.2-1999Tools and accessories for assembly of modular fixtures - Hexagon heads for electric wrenches$65.00
- JB/T 3627.3-1999Tools and accessories for assembly of modular fixtures - T-handle four-pin wrenches$65.00
- JB/T 3627.4-1999Tools and accessories for assembly of modular fixtures - Four-pin heads for electric wrenches$90.00
- JB/T 3627.5-1999Tools and accessories for assembly of modular fixtures - Four-pin wrenches$65.00
- JB/T 3627.6-1999Tools and accessories for assembly of modular fixtures - Tommy bars$65.00
- JB/T 3627.7-1999Tools and accessories for assembly of modular fixtures - Copper hammer heads$65.00
- JB/T 3627.8-1999Tools and accessories for assembly of modular fixtures - Test bars for drilling fixtures$90.00
- JB/T 3627.9-1999Tools and accessories for assembly of modular fixtures - Test bars for boring fixtures$65.00
- JB/T 3629-1999Conventional abrasives - Black fused alumina$169.00
- JB/T 3629-2012Conventional abrasive - Black fused alumina$115.00
- JB/T 3629-2025Ordinary abrasives - Black corundum$144.00
- JB/T 3631-1992Resinoid heavy-duty grinding wheels for billet conditioning$169.00
- JB/T 3631-2005Bonded abrasive products - Resin bonded heavy-duty grinding wheels$85.00
- JB/T 3631-2017Bonded abrasive products - Resin bonded heavy-duty grinding wheels$135.00
- JB/T 3632-1993Full complement tapered roller thrust bearings for screw-down mechanisms of rolling mills$249.00
- JB/T 3632-2005Rolling bearings - Full complement tapered roller thrust bearings for screw-down mechanisms of rolling mills$85.00
- JB/T 3632-2015Rolling bearings - Full complement tapered roller thrust bearings for rolling mill screw-down mechanisms$165.00
- JB/T 3643-2000Small arc welding transformers - Safety requirements$669.00
- JB/T 3644.1-1999Horizontal multiple-spindle automatic lathe Accuracy inspection$195.00
- JB/T 3644.1-2015Horizontal multi-spindle automatic lathes - Part 1: Testing of the accuracy$429.00
- JB/T 3644.2-1999Horizontal multi-spindle automatic lathes - Technical specifications$199.00
- JB/T 3644.2-2015Horizontal multi-spindle automatic lathes - Part 2: Technical requirements$129.00
- JB/T 3648.1-1994Test methods for refractory products for resistance furnaces - Thermal shock resistance of shaped insulating refractory products$109.00
- JB/T 3649.1-1994Refractory products for resistance furnaces - Fireclay refractory products$149.00
- JB/T 3649.2-1994Refractory products for resistance furnaces - High-alumina refractory products$149.00
- JB/T 3649.3-1994Refractory products for resistance furnaces - Fireclay insulating refractory products$149.00
- JB/T 3649.4-1994Refractory products for resistance furnaces - High-alumina insulating refractory products$149.00
- JB/T 3649.5-1994Refractory products for resistance furnaces - Alumina insulating refractory products$109.00
- JB/T 3649.6-1994Refractory products for resistance furnaces - Carburization-resistant refractory products$109.00
- JB/T 3651-1999Centrifugal concentrators$85.00
- JB/T 3651-2012Centrifugal concentrators$105.00
- JB/T 3663.1-1996Heavy-duty horizontal lathes - Technical specifications$209.00
- JB/T 3663.1-2006Heavy-duty horizontal lathes - Part 1: Technical requirements$105.00
- JB/T 3663.2-1998Heavy-duty horizontal lathes - Parameters$169.00
- JB/T 3663.2-2011Heavy-duty horizontal lathes - Part 2: Types and parameters$109.00
- JB/T 3663.3-1999Heavy-duty horizontal lathes - Testing of accuracy$550.00
- JB/T 3665-1996Single-column and double-column vertical lathes - Technical specifications$209.00
- JB/T 3665.1-1999Single column and double column vertical lathes - Parameters$245.00
- JB/T 3665.1-2011Vertical turning and boring lathes with one or two columns - Part 1: Types and parameters$135.00
- JB/T 3665.3-2006Single and double column vertical lathes - Part 3: Technical requirements$105.00
- JB/T 3666-1996Suspended disc feeders$249.00
- JB/T 3666-2015Suspended disc feeders$169.00
- JB/T 3667-1996Seated disk feeder$329.00
- JB/T 3667-2015Base-mounted disc feeders$199.00
- JB/T 3673-1999Transfer bobbins for stranding and closing machines - Types and dimensions$85.00
- JB/T 3673-2024Types and dimensions of rotating spools for stranding and rope-forming machines$135.00
- JB/T 3682-1984HSS wire rope lever hoists$165.00
- JB/T 3683-2001Earth-moving machinery - Zones of comfort and reach for controls$205.00
- JB/T 3685-1999Prop-drawing winches$199.00
- JB/T 3685-2015Prop-drawing winches$109.00
- JB/T 3686.1-1999Flotation machines for coal$279.00
- JB/T 3686.2-1999Flotation machines for coal - Test methods$270.00
- JB/T 3687.1-1999Base-mounted vibrating screens for mining - Series type spectrum$249.00
- JB/T 3687.1-2012Vibrating screen with base type installation - Part 1: Serial type$105.00
- JB/T 3687.2-1999Base-mounted vibrating screens for mining - Technical specifications$85.00
- JB/T 3687.2-2012Vibrating screen with base type installation - Part 2: Technical requirements$169.00
- JB/T 3688.1-1996Wheel loaders - Basic parameters$149.00
- JB/T 3688.2-1998Wheel loaders - Technical specifications$115.00
- JB/T 3688.3-1998Wheel loaders - Test methods$345.00
- JB/T 3690-1999Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components$395.00
- JB/T 3695-1994Electric hoist overhead travelling cranes$515.00
- JB/T 3695-2008Overhead cranes with electric hoists$345.00
- JB/T 3695-2026Bridge crane with electric hoist$515.00
- JB/T 3697-1996Radial milling machines - Technical specifications$209.00
- JB/T 3697.1-1999Radial milling machines - Testing of accuracy$165.00
- JB/T 3697.1-2011Radial milling machines - Part 1: Testing of the accuracy$285.00
- JB/T 3697.1-2025Radial milling machine - Part 1: Testing of accuracy$315.00
- JB/T 3697.2-2006Radial milling machines - Part 2: Specification$105.00
- JB/T 3697.2-2025Radial milling machines - Part 2: Specification$135.00
- JB/T 3698-1992Single-phase clutch motors$409.00
- JB/T 3698-2008Single-phase clutch motors$165.00
- JB/T 3699-1992Three-phase clutch motors$115.00
- JB/T 3699-2008Three-phase clutch motors$165.00
- JB/T 3702-1993Time Relay$135.00
- JB/T 3702-1997Time relays$135.00
- JB/T 3703.1-1994Small general purpose electromagnetic relays$175.00
- JB/T 3703.2-1995Procedures for testing and measuring small sized universal electromagnetic relays$325.00
- JB/T 3705-1999Permanent magnet low-speed synchronous motors - General technical specifications$195.00
- JB/T 3705-2014General Specification for Permanent Magnet Low Speed Synchronous Motor$255.00
- JB/T 3711.1-1999Centralized lubrication systems - Terminology and classification$225.00
- JB/T 3711.1-2017Centralized lubrication systems - Part 1: Terms and classification$195.00
- JB/T 3711.2-1999Centralized lubrication systems - Graphical symbols$145.00
- JB/T 3711.2-2017Centralized lubrication systems - Part 2: Graphical symbols$115.00
- JB/T 3711.3-1999Centralized lubrication systems - Technical quantities and units$135.00
- JB/T 3711.3-2017Centralized lubrication systems - Part 3: Technical quantities and units$195.00
- JB/T 3712-1998Small torsion spring comparators$245.00
- JB/T 3713.1-1999Double disc shot blast wheels - Basic parameters$169.00
- JB/T 3713.1-2008Double-disc blast wheels - Part 1: Basic parameters$189.00
- JB/T 3713.2-1997Double disc shot blast wheels - Technical specifications$209.00
- JB/T 3713.2-2011Double-disc blast wheels - Part 2: Technical requirements$105.00
- JB/T 3715-1993Cymbal-shaped grinding wheels$209.00
- JB/T 3715-2006Bonded abrasive products - Depressed centre grinding wheels for snagging$105.00
- JB/T 3715-2016Bonded abrasive products - Depressed centre grinding wheel$145.00
- JB/T 3715-2026Bonded abrasive products - Depressed centre grinding wheel$120.00
- JB/T 3716-1999Pneumatic shockless jolt squeeze moulding machines - Technical specifications$145.00
- JB/T 3716-2015Shockless jolt pressure squeeze molding machine - Technical requirements$145.00
- JB/T 3717-1999Household AC voltage regulators$225.00
- JB/T 3720-1993Guide pulleys for NC EDM wire cutting machines - Parameters$169.00
- JB/T 3720-2023General technical requirements for guide wheels of reciprocating wire EDM wire cutting machines$165.00
- JB/T 3720.1-2006Guide wheels for wire electrical discharge machines (reciprocating wire type) - Part 1: Parameters$85.00
- JB/T 3720.2-2006Guide wheels for wire electrical discharge machines (reciprocating wire type) - Part 2: Technical requirements$105.00
- JB/T 3721-1999Brake shoes for disc brakes of mine hoists$249.00
- JB/T 3721-2015Mine hoists and mine winches - Brake shoes for disc brakes$135.00
- JB/T 3725-1999Boiler ash and slag removal equipment - Naming and type designation method$85.00
- JB/T 3726-1999Boiler ash and slag removal equipment - General technical specifications$115.00
- JB/T 3727-1999Coarse powder separators, fine powder separators and air locks - Size series and technical specifications for manufacture$115.00
- JB/T 3729-1999Bronze-graphite oil-impregnated bearings$70.00
- JB/T 3729-2008Oil-impregnated bronze graphite bearings$105.00
- JB/T 3730-1999Test method for evaluating thermal endurance of flexible insulating laminates - Proof voltage method on wrapped tubes$105.00
- JB/T 3730-2015Test method for evaluating thermal endurance of flexible insulating composite materials - Proof voltage method with wrapped tubes$149.00
- JB/T 3731-1992Shaving machine. Parameters$195.00
- JB/T 3732-1994Gear shaving machines - Accuracy$449.00
- JB/T 3732.1-1998Gear shaving machine Performance test specifications$105.00
- JB/T 3732.1-2025Gear shaving machines - Part 1: Testing of the accuracy$270.00
- JB/T 3732.2-1999Gear shaving machines - Technical specifications$85.00
- JB/T 3732.2-2013Gear shaving machines - Part 2: Specifications$209.00
- JB/T 3732.2-2025Gear shaving machines - Part 2: Specification$105.00
- JB/T 3732.3-2004Gear shaving machines - Part 3: Parameters$170.00
- JB/T 3732.4-2004Gear shaving machines - Part 4: Type spectrum$85.00
- JB/T 3732.5-2006Gear shaving machines - Part 5: Testing of the accuracy$105.00
- JB/T 3733-1993Large forged alloy steel hot rolling work rolls$165.00
- JB/T 3733-2006Large forged alloy steel work rolls for hot rolling$105.00
- JB/T 3733-2017Large forged alloy steel work rolls for hot rolling - Technical requirements$105.00
- JB/T 3735-1984Cast Francis Runner$249.00
- JB/T 3735-1999Cast steel Francis turbine runners$115.00
- JB/T 3735-2014Steel Castings for Francis Runner$249.00
- JB/T 3736.1-1994Statistical tools commonly used in quality management - Pareto charts$55.00
- JB/T 3736.2-1994Statistical tools commonly used in quality management - Cause-and-effect diagrams$95.00
- JB/T 3736.3-1994Statistical tools commonly used in quality management - Fluctuation charts$85.00
- JB/T 3736.4-1994Statistical tools commonly used in quality management - Normal probability paper$209.00
- JB/T 3736.5-1994Statistical tools commonly used in quality management - Histograms$105.00
- JB/T 3736.6-1994Statistical tools commonly used in quality management - Scatter diagrams$165.00
- JB/T 3736.7-1994Statistical tools commonly used in quality management - Process capability index$85.00
- JB/T 3736.8-1994Statistical tools commonly used in quality management - Countermeasure tables$89.00
- JB/T 3750-1984Classification of product categories$860.00
- JB/T 3751-1997Bimetallic thermostats for household and similar use$365.00
- JB/T 3752.1-1999Type designation method for low-voltage switchgear and controlgear assemblies - Part 1: Low-voltage switchgear assemblies$70.00
- JB/T 3752.1-2013Low-voltage switchgear and controlgear assemblies - Type designation method - Part 1: Low-voltage switchgear assemblies$159.00
- JB/T 3752.2-1999Type designation method for low-voltage switchgear and controlgear assemblies - Part 2: Electrical control equipment$169.00
- JB/T 3752.2-2013Low-voltage switchgear and controlgear assemblies - Type designation method - Part 2: Electrical control equipment$179.00
- JB/T 3753-1999Jig boring machines - Dimensions of spindle noses with 3:20 taper bore$249.00
- JB/T 3756-1999Light-duty round column vertical drilling machines - Testing of accuracy$165.00
- JB/T 3756-2013Light type cylinder vertical drilling machine - Testing of the accuracy$289.00
- JB/T 3758-1996Motors for household washing machines - General technical specifications$245.00
- JB/T 3758-2011General specification for household washing machine motors$195.00
- JB/T 3758-2025General technical specifications for electric motors for household washing machines$210.00
- JB/T 3760-1991Pneumatic-meter buoy$135.00
- JB/T 3760-2008Float-type pneumatic gauges$105.00
- JB/T 3765-2000Hammer crushers for coal$285.00
- JB/T 3765-2008Hammer crushers for coal$105.00
- JB/T 3765-2017Hammer crushers for coal$145.00
- JB/T 3766-2000Hammer crushers for limestone$85.00
- JB/T 3766-2008Hammer crushers for limestone$105.00
- JB/T 3767-1992Shunting winches$209.00
- JB/T 3767-2006Shunting winches$105.00
- JB/T 3767-2021Shunting winches$105.00
- JB/T 3768-1993Round column vertical drilling machines - Technical specifications$209.00
- JB/T 3768-2006Round column vertical drilling machines - Technical requirements$105.00
- JB/T 3768-2021Round column vertical drilling machines - Technical requirements$165.00
- JB/T 3769-1993Square column vertical drilling machines - Technical specifications$209.00
- JB/T 3769-2006Square column vertical drilling machines - Technical requirements$105.00
- JB/T 3769-2021Square column vertical drilling machines - Technical requirements$165.00
- JB/T 3770-2000Pedestal grinders$135.00
- JB/T 3770-2017Pedestal grinders$169.00
- JB/T 3771-1992Chassis for portable compressors - Technical specifications$249.00
- JB/T 3771-2008Chassis for portable compressors - Technical requirements$105.00
- JB/T 3771-2025Mobile compressor chassis - Technical Specifications$234.00
- JB/T 3773.1-1999Pallet trucks - Basic parameters$209.00
- JB/T 3773.2-1999Pallet trucks. Testing method of whole machines$195.00
- JB/T 3773.3-1999Pallet trucks - Technical specifications$169.00
- JB/T 3775-1994Manual underslung beam cranes$325.00
- JB/T 3776-1997Umbrella drill jumbos$285.00
- JB/T 3776-2010Umbrella drill rigs$85.00
- JB/T 3777-1993Maintain intermediate relay$329.00
- JB/T 3777-2002Latching auxiliary relays$175.00
- JB/T 3778-1993Delay relays$329.00
- JB/T 3778-2002Time-delay auxiliary relays$175.00
- JB/T 3779-1993Fast relay$329.00
- JB/T 3779-2002High-speed auxiliary relays$145.00
- JB/T 3780-1993Common intermediate relay$329.00
- JB/T 3780-2002General auxiliary relays$135.00
- JB/T 3789-1997Knife grinders$245.00
- JB/T 3789-2010Printing machinery - Knife grinder$209.00
- JB/T 3790-2015Mechanical automatic strapping machines$219.00
- JB/T 3790.1-1994Mechanical automatic strapping machines$289.00
- JB/T 3790.1-2004Mechanical automatic strapping machines$85.00
- JB/T 3790.2-1994Mechanical semi-automatic strapping machines$209.00
- JB/T 3790.3-1994Hydraulic automatic strapping machines$209.00
- JB/T 3811-2013Electric fixed platform trucks$195.00
- JB/T 3811.1-1999Fixed platform trucks - Basic parameters$169.00
- JB/T 3811.2-1999Fixed platform trucks - Technical specifications$209.00
- JB/T 3812-1999Disc springs for disc brakes of mine hoists and mine winches$369.00
- JB/T 3812-2015Mine hoists and mine winches - Disc springs for disc brakes$169.00
- JB/T 3813-1999Light-duty apron feeders$85.00
- JB/T 3818-1999Hydraulic presses - Technical specifications$165.00
- JB/T 3818-2014Hydraulic presses - Technical requirements$195.00
- JB/T 3819-1984Hydraulic press for powder products Precision$209.00
- JB/T 3819-2014Powder Product Hydraulic Press - Testing of the Accuracy$120.00
- JB/T 3820-1984Hydraulic press for plastic products Precision$209.00
- JB/T 3820-2015Hydraulic presses for plastic products - Accuracy$189.00
- JB/T 3821-1984Double-action sheet metal drawing hydraulic presses - Accuracy$329.00
- JB/T 3821-2014Double action sheet metal drawing hydraulic presses - Accuracy$145.00
- JB/T 3828-1999Hot box resins for foundry$145.00
- JB/T 3828-2013Hot box resin for foundry$209.00
- JB/T 3829-1999Metallographs of vermicular graphite cast irons$195.00
- JB/T 3836-1997Special equipment for electrical industry - Product type designation method$1,404.00
- JB/T 3837-1992Method for designating models of transformer products$629.00
- JB/T 3837-1996Transformers - Product type designation method$255.00
- JB/T 3837-2010Type designation method for transformer products$628.00
- JB/T 3837-2016Identification method of transformer's product type$664.00
- JB/T 3837-2025Transformer product model compilation method$629.00
- JB/T 3843-1999Hydraulic presses - Arrangement and dimensions of slots and holes for die fixing$209.00
- JB/T 3843-2014Hydraulic presses - Layout and dimensions of slots and holes for die fixing$149.00
- JB/T 3844.1-1999Metal extrusion hydraulic presses - Basic parameters$145.00
- JB/T 3844.1-2015Metal extrusion hydraulic presses - Part 1: Basic parameters$89.00
- JB/T 3844.2-2015Metal extrusion hydraulic presses - Part 2: Accuracy$189.00
- JB/T 3847-1999Open-front presses - Arrangement and dimensions of slots and holes for die fixing$105.00
- JB/T 3847-2024Distribution and size of slots and holes for fastening dies in open presses$120.00
- JB/T 3848-1999Straight-side multi-station presses - Accuracy$105.00
- JB/T 3848-2020Straight-sided transfer presses - Accuracy$165.00
- JB/T 3849.1-1994Copying lathes - Technical specifications$85.00
- JB/T 3849.2-1994Copying lathes - Accuracy$515.00
- JB/T 3849.2-2011Copying lathes - Part 2: Testing of the accuracy$165.00
- JB/T 3849.3-1999Copying lathes - Parameters$165.00
- JB/T 3849.4-1999Copying lathes - Series spectrum$245.00
- JB/T 3850.1-1999Flanging machines - Technical specifications$115.00
- JB/T 3850.1-2015Folding machines - Part 1: Technical requirements$199.00
- JB/T 3850.2-1998Flanging machines - Accuracy$105.00
- JB/T 3850.2-2025Folding machine - Part 2: Testing of the accuracy$135.00
- JB/T 3852-1991Automatic forging presses - Safety technical specifications$189.00
- JB/T 3853-2013Direct dividing head$269.00
- JB/T 3853.1-1999Plain indexing heads - Parameters$169.00
- JB/T 3853.2-1999Plain indexing heads - Testing of accuracy$120.00
- JB/T 3855-19963.6 kV to 40.5 kV indoor AC high-voltage vacuum circuit breakers$369.00
- JB/T 3855-2008High-voltage AC vacuum circuit-breakers$165.00
- JB/T 3856-1999The type and basic data of horizontal winding machine for the middle and little motores$165.00
- JB/T 3857-1999Winding machines for power transformers - Types and basic parameters$165.00
- JB/T 3857-2010Horizontal winding machines for transformers$170.00
- JB/T 3857-2023Special equipment for transformers - Horizontal winding machines$180.00
- JB/T 3858-1999Three-roll pipe rolling machines - Types and basic parameters$165.00
- JB/T 3859-1999Bench winding machines - Types and basic parameters$165.00
- JB/T 3860.1-1998Wedge-type power chucks - Classification and technical specifications$145.00
- JB/T 3860.1-2011Machine tools - Wedge-type power chucks - Part 1: Classification and technical requirements$225.00
- JB/T 3860.2-1998Wedge-type power chucks - Interchangeability dimensions of serrated jaws$209.00
- JB/T 3860.2-2011Machine tools - Wedge-type power chucks - Part 2: Interchangeability dimensions of serrated jaws$105.00
- JB/T 3861.1-1999Nail making machines - Basic parameters$115.00
- JB/T 3861.1-2025Nail making machine - Part 1: Basic parameters$150.00
- JB/T 3861.2-1999Nail making machines - Accuracy$85.00
- JB/T 3861.2-2025Nail making machine - Part 2: Accuracy$105.00
- JB/T 3861.3-1999Nail making machines - Technical specifications$105.00
- JB/T 3861.3-2025Nail making machine - Part 3: Specifications$210.00
- JB/T 3863-1999Hydraulic presses for abrasive products - Types and basic parameters$149.00
- JB/T 3863.1-2025Abrasive product hydraulicpress - Part 1: Type and basic parameters$165.00
- JB/T 3866.1-1999Circular sawing machines - Series spectrum$285.00
- JB/T 3866.2-1999Circular sawing machines - Spindle nose connection dimensions$169.00
- JB/T 3867.1-1999Bar shearing machines - Basic parameters$119.00
- JB/T 3867.1-2015Bar shears - Part 1: Type and basic parameter$89.00
- JB/T 3867.2-1999Bar shearing machines - Accuracy$135.00
- JB/T 3867.2-2015Bar shears - Part 2: Accuracy$129.00
- JB/T 3869-1999Adjustable hand reamers$115.00
- JB/T 3870.1-1999Snap gauge grinding machines - Testing of accuracy$105.00
- JB/T 3870.1-2019Snap gauge grinding machines - Part 1: Testing of the accuracy$180.00
- JB/T 3870.2-1999Snap gauge grinding machines - Technical specifications$169.00
- JB/T 3870.2-2007Snap gauge grinding machines - Part 2: Technical requirements$70.00
- JB/T 3872-1999Woodworking-square chiset drill$289.00
- JB/T 3872-2010Square chisel drill for woodworking$85.00
- JB/T 3872-2025Woodworking machine drill bits$304.00
- JB/T 3873-1999Earth-moving machinery - Methods for locating the centre of gravity$365.00
- JB/T 3874-2001Gyratory crushers$105.00
- JB/T 3874-2010Gyratory crushers$85.00
- JB/T 3875.1-1999Universal tool grinding machines - Parameters$169.00
- JB/T 3875.1-2014Universal Tool & Cutter Grinding Machines - Part 1: Types and Parameters$95.00
- JB/T 3875.2-1999Universal tool grinding machines - Testing of accuracy$135.00
- JB/T 3875.2-2017Universal tool and cutter grinding machines - Part 2: Testing of the accuracy$360.00
- JB/T 3875.3-1999Universal tool grinding machines - Technical specifications$209.00
- JB/T 3875.3-2007Universal tool and cutter grinding machines - Part 3: Technical requirements$85.00
- JB/T 3876-1999Short pitch transmission precision roller chains - Heavy series$325.00
- JB/T 3878.1-1985Socket welding elbow pipe fittings$165.00
- JB/T 3878.2-1985Socket welding tee pipe fittings$165.00
- JB/T 3878.3-1985Socket welding cross pipe fittings$165.00
- JB/T 3878.4-1985Socket welding acute-angle tee pipe fittings$165.00
- JB/T 3878.5-1985Socket welding reducing pipe fittings$165.00
- JB/T 3878.6-1985Socket welding straight pipe fittings$165.00
- JB/T 3878.7-1985Socket welding pipe fittings$165.00
- JB/T 3878.8-1985Socket welding pipe fittings - Technical specifications$165.00
- JB/T 3879-1999Coining presses - Accuracy$105.00
- JB/T 3881-1999Straight-side double-action drawing presses - Accuracy$105.00
- JB/T 3881-2014Straight-sided double action drawing presses - Accuracy$150.00
- JB/T 3882-1993Spline shaft milling machines - Technical specifications$209.00
- JB/T 3882-2025Spline hobbing machines - Specification$120.00
- JB/T 3882.1-2007Spline shaft milling machines - Part 1: Types and parameters$130.00
- JB/T 3882.2-2006Spline shaft milling machines - Part 2: Technical requirements$105.00
- JB/T 3883-1999Grinding machines - Dust collectors$205.00
- JB/T 3884-1996Automatic bending machines$135.00
- JB/T 3884-2017Automatic bending machines$205.00
- JB/T 3885-1993Gear honing machines - Technical specifications$209.00
- JB/T 3885.1-1999Gear honing machines - Parameters$169.00
- JB/T 3885.1-2013Gear honing machines - Part 1: Types and Parameters$129.00
- JB/T 3885.2-1999Gear honing machines - Series spectrum$165.00
- JB/T 3885.2-2019Gear honing machines - Part 2: Testing of the accuracy$270.00
- JB/T 3885.3-1999Gear honing machines - Testing of accuracy$135.00
- JB/T 3885.3-2019Gear honing machines - Part 3: Technical requirements$105.00
- JB/T 3885.4-2006Gear honing machines - Part 4: Specifications$105.00
- JB/T 3887-1999Involute spur master gears$245.00
- JB/T 3887-2010Involute spur cylindrical master gears$329.00
- JB/T 3889-1994Abrasive cloth$249.00
- JB/T 3889-2006Coated abrasives - Abrasive cloth$85.00
- JB/T 3889-2023Coated abrasives - Abrasive cloth$105.00
- JB/T 3890-1999Silicon carbide heating rods$165.00
- JB/T 3890-2008Special silicon carbide products - Silicon carbide rods$225.00
- JB/T 3890-2017Special silicon carbide products - Silicon carbide rods$335.00
- JB/T 3891-1996Grinding wheel$195.00
- JB/T 3894-2025Tube bending machineTerminology$270.00
- JB/T 3894.1-1999Pipe bending machines - Terminology$255.00
- JB/T 3903-1999TQ-16x16 raise climbers$105.00
- JB/T 3904-1994Rock drilling machinery and pneumatic tools - General technical specifications for permanent mould and sand cast aluminium alloy castings$289.00
- JB/T 3904-2006Rock drilling machines and pneumatic tools - General technical requirements for permanent mould and sand cast aluminium alloy castings$105.00
- JB/T 3904-2017Rock drilling machines and pneumatic tools - General technical requirements for permanent mould and sand cast aluminium alloy castings$135.00
- JB/T 3905-1994Rock drilling machinery and pneumatic tools - General technical specifications for aluminium alloy castings$249.00
- JB/T 3905-2006Rock drilling machines and pneumatic tools - General technical requirements for cast aluminium alloys$105.00
- JB/T 3905-2017Rock drilling machines and pneumatic tools - General technical requirements for cast aluminium alloys$135.00
- JB/T 3906-1999Rock drilling machinery and pneumatic tools - General technical specifications for magnesium alloy castings$470.00
- JB/T 3906-2011Rock drilling machines and pneumatic tools - General technical requirements for magnesium alloy castings$225.00
- JB/T 3907-1999Push-button switches$505.00
- JB/T 3907-2008Machine tool electric apparatus - Push-button switches$375.00
- JB/T 3907-2025Machine tool electric apparatus - Push-button switches$455.00
- JB/T 3908-1999Indicator lights$195.00
- JB/T 3908-2008Machine tool electrical apparatus - Indicator lights$225.00
- JB/T 3908-2025Machine tool electric apparatus - Signal lamps$330.00
- JB/T 3909-1999Thermal overload relays for machine tools$355.00
- JB/T 3909-2021Thermal overload relays for machine tools$500.00
- JB/T 3912-1985High-speed steel cutting tools steam treatment oxynitride Quality Inspection$85.00
- JB/T 3912-2013Quality inspection of steam treatment and oxynitriding of high-speed steel cutting tools$85.00
- JB/T 3914-1999Superabrasives - Sampling method$249.00
- JB/T 3914-2012Superabrasive - Sampling method$105.00
- JB/T 3914-2026Superabrasive - Sampling method$90.00
- JB/T 3915-1985Hydraulic presses - Technical specifications for safety$389.00
- JB/T 3923-1993Diesel engines - Fuel injection pump couplings - Types and basic dimensions$289.00
- JB/T 3923-2005Pump drive couplings for diesel engines - Types and basic dimensions$115.00
- JB/T 3923-2018Diesel engines - Pump drive coupling - Models and dimensions$135.00
- JB/T 3924-1999Transformers for medium frequency induction heating equipment$85.00
- JB/T 3924-2014Intermediate-frequency induction transformers$215.00
- JB/T 3926-2014Vertical Bucket Elevator$345.00
- JB/T 3926.1-1999Vertical bucket elevators - Types and basic parameters$70.00
- JB/T 3926.10-1999Vertical bucket elevators - Type T buckets - Parameters and dimensions$169.00
- JB/T 3926.11-1999Vertical bucket elevators - Drive pulleys - Parameters and dimensions$169.00
- JB/T 3926.12-1999Vertical bucket elevators - Belt bolts - Parameters and dimensions$169.00
- JB/T 3926.13-1999Vertical bucket elevators - Round link chain sprockets - Parameters and dimensions$169.00
- JB/T 3926.2-1999Vertical bucket elevators - Technical specifications$249.00
- JB/T 3926.3-1999Vertical bucket elevators - Type Q buckets - Parameters and dimensions$169.00
- JB/T 3926.4-1999Vertical bucket elevators - Type H buckets - Parameters and dimensions$169.00
- JB/T 3926.5-1999Vertical bucket elevators - Type Zd buckets - Parameters and dimensions$169.00
- JB/T 3926.6-1999Vertical bucket elevators - Type Zh buckets - Parameters and dimensions$169.00
- JB/T 3926.7-1999Vertical bucket elevators - Type Sd buckets - Parameters and dimensions$169.00
- JB/T 3926.8-1999Vertical bucket elevators - Type Sh buckets - Parameters and dimensions$169.00
- JB/T 3926.9-1999Vertical bucket elevators - Type J buckets - Parameters and dimensions$169.00
- JB/T 3927-1999Mobile belt conveyors$369.00
- JB/T 3927-2010Mobile belt conveyors$145.00
- JB/T 3927-2026Mobile belt conveyors$240.00
- JB/T 3929-1999General purpose overhead conveyors - Technical specifications$325.00
- JB/T 3929-2008General purpose overhead conveyors$255.00
All JB/T ranges
- JB/T 74-1994 – JB/T 2001.25-1999
- JB/T 2001.26-1999 – JB/T 2848-2006
- JB/T 2848-2022 – JB/T 3411.42-1999
- JB/T 3411.43-1999 – JB/T 3929-2008
- JB/T 3941-1999 – JB/T 4254-2016
- JB/T 4255-1999 – JB/T 5111.2-1991
- JB/T 5111.2-2015 – JB/T 5363-2025
- JB/T 5364-1991 – JB/T 5734-1991
- JB/T 5734-2025 – JB/T 6005-1992
- JB/T 6006-1992 – JB/T 6237.3-1992
- JB/T 6237.3-2008 – JB/T 6439-2026
- JB/T 6440-1992 – JB/T 6703.1-2000
- JB/T 6703.2-2007 – JB/T 6954-1993
- JB/T 6954-2007 – JB/T 7187.4-1995
- JB/T 7187.5-1995 – JB/T 7414.2-2006
- JB/T 7415.1-1994 – JB/T 7626-1994
- JB/T 7626-2013 – JB/T 7764-1995
- JB/T 7765-1995 – JB/T 7948.8-2017
- JB/T 7948.9-1995 – JB/T 8080-1999
- JB/T 8081-1995 – JB/T 8223.3-1999
- JB/T 8223.4-1999 – JB/T 8386.2-1996
- JB/T 8386.2-2014 – JB/T 8629-2006
- JB/T 8630-1997 – JB/T 8846.1-2001
- JB/T 8846.1-2020 – JB/T 9098-2005
- JB/T 9098-2025 – JB/T 9274-2026
- JB/T 9275-1999 – JB/T 9559-1999
- JB/T 9559-2016 – JB/T 9836-2000
- JB/T 9837-1999 – JB/T 10080.1-2000
- JB/T 10080.1-2011 – JB/T 10326-2002
- JB/T 10326-2026 – JB/T 10633-2006
- JB/T 10634-2006 – JB/T 10963-2010
- JB/T 10964-2010 – JB/T 11365-2013
- JB/T 11366-2013 – JB/T 11782-2014
- JB/T 11783.1-2014 – JB/T 12200-2015
- JB/T 12201-2015 – JB/T 12628-2016
- JB/T 12629-2016 – JB/T 13071.2-2017
- JB/T 13071.3-2017 – JB/T 13522-2018
- JB/T 13523-2018 – JB/T 13944-2020
- JB/T 13945-2020 – JB/T 14422-2023
- JB/T 14423-2023 – JB/T 14889-2024
- JB/T 14890-2024 – JB/T 15385-2025
- JB/T 15386-2025 – JB/T 50001-1999
- JB/T 50002-1999 – JB/T 53325-1999
- JB/T 53326-1999 – JB/T 58800-1999