JB/T 3889-2006Coated abrasives - Abrasive cloth (English PDF)
涂附磨具 砂布
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3889-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 27, 2006
Implementation date
June 1, 2007
Scope
JB/T 3889-2006 is the English-translated version of 涂附磨具 砂布.
JB/T 3889-2006 is the Chinese standard "Coated abrasives - Abrasive cloth". Its scope clause reads: This standard specifies the classification, requirements, test methods, inspection rules as well as marking, packaging, transport and storage of abrasive cloth.
This standard is applicable to coated abrasives made by bonding artificial abrasives such as corundum and silicon carbide to the surface of the cloth base with adhesion agents such as gelatine glue and synthetic resin. Its clauses include terms.
Found what you need?
Document preview — JB/T 3889-2006
National Standard of the People's Republic of China
- Replacing
- JB/T 3889-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms
- 4 Product classification
- 4.1 Classified by shape
- 4.2 Classified by adhesion agents
- 4.3 Classified by base material
- 4.4 Classified by abrasives
- 4.5 Marking example
- 5 Requirements
- 5.1 Abrasive particle size and distribution
- 5.2 Dimension and limit deviation
- 5.3 Tensile strength and elongation
- 5.4 Appearance quality
- 6 Test methods
- 6.1 Determination of particle size distribution of abrasives
- 6.2 Dimensional inspection
- 6.3 Tensile strength and elongation inspection
- 6.4 Appearance quality inspection
- 7 Inspection rules
- 7.1 Inspection items
- 7.2 Sampling
- 7.3 Determination of inspection lot
- 7.4 Inspection rules for plain sheets
- 7.5 Inspection rules for abrasive cloth rolls
- 8 Marking, packaging and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transport
- 8.4 Storage
- Table 1 Classified by shape and symbols
- Table 2 Classified by adhesion agents and symbols
- Table 3 Classified by base material and symbols
- Table 4 Tensile strength and elongation of abrasive cloth rolls
- Table 5 Classification of rejected plain sheets
- Table 6 Classification of rejected abrasive cloth rolls
1 Scope
This standard specifies the classification, requirements, test methods, inspection rules as well as marking, packaging, transport and storage of abrasive cloth.
This standard is applicable to coated abrasives made by bonding artificial abrasives such as corundum and silicon carbide to the surface of the cloth base with adhesion agents such as gelatine glue and synthetic resin.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2476 Conventional abrasive - Symbols
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2003, ISO 2859-1:1999, IDT)
GB/T 9258.1 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (GB/T 9258.1-2000, idt ISO 6344-1:1998)
GB/T 9258.2 Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 (GB/T 9258.2-2000, idt ISO 6346-2:1998)
GB/T 9258.3 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2 500 (GB/T 9258.3-2000, idt ISO 6344-3:1998)
GB/T 15305.1 Coated abrasives - Plain sheets (GB/T 15305.1-2005, ISO 21948:2001, MOD)
GB/T 15305.2 Coated abrasives - Abrasive rolls - Dimensions and tolerance
JB/T 7424 Coated abrasives - Determination of tensile strength and extensibility
3 Terms
For the purposes of this standard, the following terms and definitions apply.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 3889
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3889-2006 | Coated abrasives - Abrasive cloth | current edition | Current |
| JB/T 3889-1994 | Coated abrasives - Abrasive cloth | previous edition | Superseded |
This page sells the current edition, JB/T 3889-2006. Earlier editions are listed for reference only.
How to Download JB/T 3889-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 106-2024 — Valves marking and coating
JB/T 14540-2024 — Sanitary cam rotor pumps
JB/T 14754-2024 — Equipment for disposal of dead and diseased livestock and poultry
Secure payment via Stripe
Payments accepted
JB/T 3889-2006
$90.00