JB/T 10155-2012Coated abrasives - Test method for grinding performance of abrasive cloth and abrasive paper (English PDF)
涂附磨具 砂布砂纸磨削性能试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10155-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 10155-2012 is the English-translated version of 涂附磨具 砂布砂纸磨削性能试验方法.
Testing the grinding properties of abrasive cloth and abrasive paper is the subject of JB/T 10155-2012. The standard sets the test equipment, the test conditions, the preparation of the specimen, the test procedure and the processing of the test results.
The grinding properties tester must have a grinding disc end face that does not run out by more than 0.05 mm and a disc speed of (320 ± 5) r/min, with a grinding track whose ring inner diameter is (87 ± 0.2) mm and whose ring width is (16.5 ± 0.4) mm.
It applies to abrasive cloth, abrasive paper and water-resistant abrasive paper. The standard replaces JB/T 10155-1999 and took effect on 1 November 2012.
Found what you need?
Document preview — JB/T 10155-2012
National Standard of the People's Republic of China
- Replacing
- JB/T 10155-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword3
- 1 Scope4
- 2 Test equipment4
- 2.1 Grinding properties tester4
- 2.2 Balance4
- 2.3 Constant temperature water bath4
- 3 Test conditions4
- 4 Specimen preparation5
- 5 Test procedure5
- 5.1 Dry grinding test5
- 5.2 Wet grinding test6
- 6 Processing of test results6
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces JB/T 10155-1999 "Coated abrasives - Test method of the grinding properties of abrasive cloth and abrasive paper". Compared with JB/T 10155-1999, the main technical changes in this Standard are as follows:
- modified the type of abrasive cloth (see Table 1 of this Edition, Table 1 of Edition 1999);
- added the detailed regulations for grinding time (see Table 1 of this Edition).
1 Scope
This Standard specifies the test method of the grinding properties of abrasive cloth and abrasive paper: test equipment, test conditions, specimen preparation, test procedures and processing of test results.
This Standard is applicable to abrasive cloth, abrasive paper and water-resistant abrasive paper.
2 Test equipment
2.1 Grinding properties tester
The grinding properties tester shall meet the following requirements:
a) The grinding disc end face of the grinding properties tester does not run out much 0.05 mm;
b) The grinding disc speed of the grinding properties tester is (320±5) r/min;
c) Grinding track: The ring inner diameter of the track is (87±0.2) mm, and the ring width is (16.5±0.4) mm.
2.2 Balance
The scale of the balance is 0.01 g.
2.3 Constant temperature water bath
The fluctuation of water temperature is ±2°C.
3 Test conditions
The test conditions for the grinding properties of abrasive cloth and abrasive paper shall meet the requirements in Table 1. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 10155
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10155-2012 | Coated abrasives - Test method for grinding performance of abrasive cloth and abrasive paper | current edition | Current |
| JB/T 10155-1999 | Coated abrasives - Test method for grinding performance of abrasive cloth and abrasive paper | previous edition | Superseded |
This page sells the current edition, JB/T 10155-2012. Earlier editions are listed for reference only.
How to Download JB/T 10155-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 10155-2012
$55.00