JB/T 3729-2008Oil-impregnated bronze graphite bearings (English PDF)
青铜石墨含油轴承
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3729-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 16, 2008
Implementation date
December 1, 2008
Scope
JB/T 3729-2008 is the English-translated version of 青铜石墨含油轴承.
JB/T 3729-2008 is a recommended Chinese machinery industry standard for oil-impregnated bronze graphite bearings. It specifies the technical conditions for the production and use of these bearings and the rules for their inspection and testing.
It applies to oil-impregnated bronze graphite bearings fitted to automobiles, tractors, washing machines and electric fans, to small and micro motors, and to other mechanical equipment.
The standard replaces JB/T 3729-1999 and quotes JB/T 9580. It is catalogued as K16 and 29.120.
Found what you need?
Document preview — JB/T 3729-2008
National Standard of the People's Republic of China
- ICS
- 29.120
- Replacing
- JB/T 3729-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 3729-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 June 2008 and has been in force since 1 December 2008.
It replaces the earlier edition JB/T 3729-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for oil-impregnated bronze graphite bearings. It specifies the technical conditions for the production and use of these bearings and the rules for their inspection and testing. It applies to oil-impregnated bronze graphite bearings fitted to automobiles, tractors, washing machines and electric fans, to small and micro motors, and to other mechanical equipment. The standard replaces JB/T 3729-1999 and quotes JB/T 9580. It is catalogued as K16 and 29.120.
JB/T 3729-2008 falls under ICS 29.120, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 9580
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 3729-1999 (earlier edition)
Standards on related subjects:
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
GB/T 4180-2012 — Permanent magnetic material of rare earth cobalt
JB/T 10441.3-2004 — Crepe insulating paper for electrical purposes - Part 3: Technical requirements
JB/T 9581-2025 — Movie projection charcoal rod
JB/T 8133.19-2025 — Test methods for physical and chemical properties of electric carbon products - Part 19: Elastic modulus
JB/T 4003-2025 — Motor brushes
6 Classification and status
International classification (ICS): 29.120
Chinese Standard Classification (CCS): K 16
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 3729
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3729-2008 | Oil-impregnated bronze graphite bearings | current edition | Current |
| JB/T 3729-1999 | Oil-impregnated bronze graphite bearings | previous edition | Superseded |
This page sells the current edition, JB/T 3729-2008. Earlier editions are listed for reference only.
How to Download JB/T 3729-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 9580-1999 — Carbon-graphite products - Product classification and type designation method
JB/T 9580-2008 — Carbon-graphite products - Classification and type designation method
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 3729-2008
$105.00