JB/T 3716-2015Shockless jolt pressure squeeze molding machine - Technical requirements (English PDF)
气动微震压实造型机 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3716-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 3716-2015 is the English-translated version of 气动微震压实造型机 技术条件.
JB/T 3716-2015 is a recommended Chinese machinery industry standard for shockless jolt squeeze moulding machines of the pneumatic micro-jolt compaction type. It states the technical requirements, the test methods and the inspection rules for these machines, together with the provisions on marking, packaging, transport and the warranty.
It applies to single-column pneumatic micro-jolt compaction moulding machines used for moulding in the foundry shop. The document is classified J61 in the Chinese system and 25.120.30 internationally.
It quotes GB/T 1804-2000, GB/T 3766, GB 5226.1, GB/T 6576, GB/T 7932, GB/T 9969, GB 20905, GB/T 23570, GB/T 25711-2010, JB/T 5365.1, JB/T 8356.1 and JB/T 8356.2. It replaces JB/T 3716-1999.
Found what you need?
Document preview — JB/T 3716-2015
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Replacing
- JB/T 3716-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 3716-2015 was issued by MIIT on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 3716-1999.
2 Scope
This standard is a recommended Chinese machinery industry standard for shockless jolt squeeze moulding machines of the pneumatic micro-jolt compaction type. It states the technical requirements, the test methods and the inspection rules for these machines, together with the provisions on marking, packaging, transport and the warranty. It applies to single-column pneumatic micro-jolt compaction moulding machines used for moulding in the foundry shop. The document is classified J61 in the Chinese system and 25.120.30 internationally. It quotes GB/T 1804-2000, GB/T 3766, GB 5226.1, GB/T 6576, GB/T 7932, GB/T 9969, GB 20905, GB/T 23570, GB/T 25711-2010, JB/T 5365.1, JB/T 8356.1 and JB/T 8356.2. It replaces JB/T 3716-1999.
3 Normative references
JB/T 3716-2015 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3766
GB 5226.1
GB/T 6576
GB/T 7932
GB/T 9969
GB/T 13306
GB 20905
GB/T 25371
GB/T 23570
GB/T 25711-2010
JB/T 5365.1
JB/T 8356.1
JB/T 8356.2
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 3716-1999 (earlier edition)
6 Classification and status
International classification (ICS): 25.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 6576Machine tool -- Lubrication systems
- GB/T 7932Pneumatic fluid power -- General rules and safety requirements for systems and their components
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 13306Plates
GB 5226.1
Similar standards
Editions of JB/T 3716
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3716-2015 | Shockless jolt pressure squeeze molding machine - Technical requirements | current edition | Current |
| JB/T 3716-1999 | Shockless jolt pressure squeeze molding machine - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 3716-2015. Earlier editions are listed for reference only.
How to Download JB/T 3716-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 20905-2025 — Foundry machinery - Safety requirements
GB/T 13306-2011 — Plates
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
Secure payment via Stripe
Payments accepted
JB/T 3716-2015
$145.00