GB/T 33468-2016Automatic one stage injection stretch and blow molding machine (English PDF)

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the terms and definitions of the automatic one-step injection molding machine (hereinafter referred to as "injection blow molding machine"), type, type, Basic parameters and working conditions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements.

This standard applies to the use of polyethylene terephthalate resin (PET), polyethylene naphthalate resin (PEN), polypropylene Resin (PP), polycarbonate resin (PC), polystyrene resin (PS) and other materials, through injection molding billet, biaxial stretch blow molding, cooling stereotypes One-step molding process, the production of packaging containers molding equipment.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 191 packaging and storage icon

GB/T 2828.1-2012 Count Sampling Inspection Procedures Part 1: Batch Inspection Sampling by Reception Quality Limit (AQL) plan

GB 2894 Safety signs and guidelines for their use

GB/T 3766 General rules and safety requirements for hydraulic drive systems and their components

GB 4208-2008 enclosure protection class (IP code)

GB 5226.1-2008 Mechanical electrical safety machinery - Electrical equipment - Part 1: General technical requirements

GB/T 7311 Packaging machinery classification and model preparation method

GB/T 7932 General technical requirements for pneumatic systems

GB/T 8196 Mechanical safety equipment - Design and manufacture of fixed and movable protective devices - General requirements

GB 9688 Hygienic standard for polypropylene molded articles for food packaging

GB 9693 Hygienic standard for polypropylene resins for food packaging

GB/T 9969 General rules for the use of industrial products

GB 13113 Hygienic standard for polyethylene terephthalate molded articles for food containers and packaging materials

GB 13114 Hygienic standard for polyethylene terephthalate resin for food containers and packaging materials

GB 13116 Hygienic standards for polycarbonate resins for food containers and packaging materials

GB/T 13277.1-2008 Compressed air - Part 1: Degree of purification of pollutants

GB/T 13306 signs

GB/T 13384 General specification for packaging of electromechanical products

GB/T 14253 General technical requirements for light industrial machinery

GB 14942 Hygienic standard for polycarbonate molded articles for food containers and packaging materials

GB/T 15706 General principles of mechanical safety design Risk assessment and risk reduction

GB 16754 mechanical safety emergency stop design principles

Safety and Health of Food Machinery

GB/T 16855.1 Mechanical safety control systems - Safety components - Part 1: Design general rules

GB 17888 (all parts) Mechanical safety access to machinery