JB/T 3699-2008Three-phase clutch motors (English PDF)
三相离合器电动机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3699-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 3699-2008 is the English-translated version of 三相离合器电动机.
The recommended Chinese machinery industry standard JB/T 3699-2008 applies to three-phase clutch motors. It specifies the type, the structure and the size of these motors, their basic parameters, the technical requirements, the test methods and the inspection rules, and the requirements for marking and packaging.
Its field of application is three-phase clutch motors for industrial sewing machines and similar purposes, and motors derived from the series may be built to it as well.
It supersedes JB/T 3699-1992, and among the standards it quotes are GB 755-2000, GB/T 1032-2005 and GB/T 10069.1-2006. The catalogue records the classifications K22 and 29.160.30.
Found what you need?
Document preview — JB/T 3699-2008
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Replacing
- JB/T 3699-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 3699-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 3699-1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
The recommended Chinese machinery industry standard JB/T 3699-2008 applies to three-phase clutch motors. It specifies the type, the structure and the size of these motors, their basic parameters, the technical requirements, the test methods and the inspection rules, and the requirements for marking and packaging. Its field of application is three-phase clutch motors for industrial sewing machines and similar purposes, and motors derived from the series may be built to it as well. It supersedes JB/T 3699-1992, and among the standards it quotes are GB 755-2000, GB/T 1032-2005 and GB/T 10069.1-2006. The catalogue records the classifications K22 and 29.160.30.
JB/T 3699-2008 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB 755-2000 — Rotating electrical machines-Rating and performance
GB/T 1032-2005 — Three-phase asynchronous motor test methods
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 5171-2002 — General technical conditions of small power motors
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB 12350-2000 — Safety requirments of small power motors
GB/T 12665 ??- 1990 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
JB/T 9615.1-2000 — Test methods for interturn insulation of random-wound windings of low-voltage AC machines
JB/T 9615.2-2000 — Test limits for interturn insulation of random-wound windings of low-voltage AC machines
JB/T 10490-2004 — Mechanical vibration of small-power motors - Measurement, evaluation and limits
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 3699-1992 (earlier edition)
Standards on related subjects:
GB/T 1032-2023 — Test methods for three-phase asynchronous motors
GB/T 13957-2022 — Technical requirements for the fundamental series of three-phase large asynchronous motor
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 7118-2025 — YVF Series (IP55) Variable Frequency Speed Control Three-Phase Asynchronous Motors Technical Specifications (Frame Sizes 63 to 355)
JB/T 5271-2022 — Specification for YE2 series (IP23) three-phase induction motors (frame size 160~400)
JB/T 3698-2008 — Single-phase clutch motors
6 Classification and status
International classification (ICS): 29.160.30
Chinese Standard Classification (CCS): K 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2000Graphical symbols marking for handling and storage of packages
- GB 755-2000Rotating Electrical Machines - Rating and Performance
- GB/T 1032-2005Test methods for three-phase asynchronous motors
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 5171-2002General technical conditions of small power motors
- GB/T 10069.1-2006Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
Similar standards
Editions of JB/T 3699
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3699-2008 | Three-phase clutch motors | current edition | Current |
| JB/T 3699-1992 | Three-phase clutch motors | previous edition | Superseded |
This page sells the current edition, JB/T 3699-2008. Earlier editions are listed for reference only.
How to Download JB/T 3699-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12350-2000 — Safety requirments of small power motors
GB 755-2000 — Rotating electrical machines-Rating and performance
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
JB/T 3699-2008
$165.00