JB/T 3732.2-2013Gear shaving machines - Part 2: Specifications (English PDF)
剃齿机 第2部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3732.2-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 3732.2-2013 is the English-translated version of 剃齿机 第2部分：技术条件.
JB/T 3732.2-2013 is the Chinese machinery industry standard covering gear shaving machines, Part 2: Specifications. It was issued on 31 December 2013 and has been in force since 1 July 2014, replacing JB/T 3732.2-1999.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2013 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 3732.2-2013
National Standard of the People's Republic of China
- Replacing
- JB/T 3732.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 3732.2-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 3732.2-1999.
It is one of 7 parts of the JB/T 3732 series.
2 Scope Preview
JB/T 3732.2-2013 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 3732-1994 — Gear shaving machines - Accuracy
JB/T 3732.1-1998 — Gear shaving machine Performance test specifications
JB/T 3732.1-2025 — Gear shaving machines - Part 1: Testing of the accuracy
JB/T 3732.3-2004 — Gear shaving machines - Part 3: Parameters
JB/T 3732.4-2004 — Gear shaving machines - Part 4: Type spectrum
JB/T 3732.5-2006 — Gear shaving machines - Part 5: Testing of the accuracy
Other editions:
JB/T 3732.2-2025 (later edition)
JB/T 3732.2-1999 (earlier edition)
Standards on related subjects:
GB/T 38193-2019 — Machine tools automatic production line for automobile gears
JB/T 12396-2015 — Proportional valve solenoids
JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements
JB/T 3882-2025 — Spline hobbing machines - Specification
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 3732.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3732.2-2013 | Gear shaving machines - Part 2: Specifications | current edition | Current |
| JB/T 3732.2-1999 | Gear shaving machines - Part 2: Specifications | previous edition | Superseded |
This page sells the current edition, JB/T 3732.2-2013. Earlier editions are listed for reference only.
How to Download JB/T 3732.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 3732.3-2004 — Gear shaving machines - Part 3: Parameters
JB/T 3732.1-1998 — Gear shaving machine Performance test specifications
JB/T 3732.4-2004 — Gear shaving machines - Part 4: Type spectrum
Secure payment via Stripe
Payments accepted
JB/T 3732.2-2013
$209.00