JB/T 2001.62-1999Water systems - Solenoid distributors for pump stations (PN 20 MPa and 31.5 MPa) (English PDF)
水系统 泵站用电磁分配器（PN=20、31.5MPa）
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2001.62-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 28, 1999
Implementation date
January 1, 2000
Scope
JB/T 2001.62-1999 is the English-translated version of 水系统 泵站用电磁分配器（PN=20、31.5MPa）.
JB/T 2001.62-1999 is the Chinese machinery industry standard covering water systems - Solenoid distributors for pump stations (PN 20 MPa and 31.5 MPa). It was issued on 28 June 1999 and has been in force since 1 January 2000, replacing JB 2065-1984.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1999 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 2001.62-1999
National Standard of the People's Republic of China
- Replacing
- JB 2065-1984
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 2001.62-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 June 1999.
It is one of 75 parts of the JB/T 2001 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 2001.62-1999 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 2001-2018 — Water system
JB/T 2001.1-1999 — Water systems - Plunger glands - Types and dimensions (PN 31.5 MPa)
JB/T 2001.2-1999 — Water systems - Plunger glands - Types and dimensions (PN 20 MPa)
JB/T 2001.3-1999 — Water systems - Guide sleeves - Types and dimensions
JB/T 2001.4-1999 — Water systems - Support rings for U-type fabric rubber seals - Types and dimensions
JB/T 2001.5-1999 — Water systems - Copper flange gaskets - Types and dimensions
JB/T 2001.6-1999 — Water systems - Oval attachment flanges - Types and dimensions (PN 31.5 MPa)
JB/T 2001.7-1999 — Water systems - Square attachment flanges - Types and dimensions (PN 31.5 MPa)
JB/T 2001.8-1999 — Water systems - Round flanges - Types and dimensions (PN 31.5 MPa)
JB/T 2001.9-1999 — Water systems - Square flanges - Types and dimensions (PN 20 MPa)
JB/T 2001.10-1999 — Water systems - Round attachment flanges - Types and dimensions (PN 20 MPa)
JB/T 2001.11-1999 — Water systems - Square flanges - Types and dimensions (PN 10 MPa)
JB/T 2001.12-1999 — Water systems - Round attachment flanges - Types and dimensions (PN 10 MPa)
JB/T 2001.13-1999 — Water systems - Square attachment flanges - Types and dimensions (PN 4.0 MPa)
JB/T 2001.14-1999 — Water systems - Oval connecting flanges - Types and dimensions (PN 31.5 MPa)
JB/T 2001.15-1999 — Water systems - Square connecting flanges - Types and dimensions (PN 31.5 MPa)
JB/T 2001.16-1999 — Water systems - Round connecting flanges - Types and dimensions (PN 31.5 MPa)
JB/T 2001.17-1999 — Water systems - Square connecting flanges - Types and dimensions (PN 20 MPa)
JB/T 2001.18-1999 — Water systems - Round connecting flanges - Types and dimensions (PN 20 MPa)
JB/T 2001.19-1999 — Water systems - Air bleed valves - Types and dimensions (PN up to 50 MPa)
JB/T 2001.20-1999 — Water systems - Centralized air vent valve cores (PN 31.5 MPa)
JB/T 2001.21-1999 — Water systems - Centralized air vent valves (PN 31.5 MPa)
JB/T 2001.22-1999 — Water systems - Pressure gauge cocks - Types and dimensions (PN 31.5 MPa)
JB/T 2001.23-1999 — Water systems - Screw plugs (PN 31.5 MPa)
JB/T 2001.24-1999 — Water systems - Drain plugs - Types and dimensions (PN 31.5 MPa)
JB/T 2001.25-1999 — Water systems - Distributing valve cores (PN 20 MPa, 31.5 MPa)
JB/T 2001.26-1999 — Water systems - Manual gate valve cores (PN 20 MPa, 31.5 MPa)
JB/T 2001.27-1999 — Water systems - Manual gate valves (PN 31.5 MPa)
JB/T 2001.28-1999 — Water systems - Manual gate valves (PN 20 MPa)
JB/T 2001.29-1999 — Water systems - Hydraulic gate valve cores (PN 20 MPa and 31.5 MPa)
JB/T 2001.30-1999 — Water systems - Hydraulic gate valves (PN 31.5 MPa)
JB/T 2001.31-1999 — Water systems - Hydraulic gate valves (PN 20 MPa)
JB/T 2001.32-1999 — Water systems - Screw plug type check valve cores (PN 20 MPa, 31.5 MPa)
JB/T 2001.33-1999 — Water systems - Flanged check valve cores (PN 20 MPa and 31.5 MPa)
JB/T 2001.34-1999 — Water systems - Check valves (PN 31.5 MPa)
JB/T 2001.35-1999 — Water systems - Check valves (PN 20 MPa)
JB/T 2001.36-1999 — Water systems - Prefill valve cores (PN 20 MPa, 31.5 MPa)
JB/T 2001.37-1999 — Water systems - Prefill valve actuators (type A) (PN 31.5 MPa)
JB/T 2001.38-1999 — Water systems - Prefill valves - Servomotors (type A) (PN 20 MPa)
JB/T 2001.39-1999 — Water systems - Prefill valves (PN 31.5 MPa)
JB/T 2001.40-1999 — Water systems - Prefill valves (PN 20 MPa)
JB/T 2001.41-1999 — Water systems - Overflow valves (PN 0.4 MPa, 0.8 MPa, 1.2 MPa)
JB/T 2001.42-1999 — Water systems - Prefill tanks
JB/T 2001.43-1999 — Water systems - Two-valve distributors (PN 20 MPa and 31.5 MPa)
JB/T 2001.44-1999 — Water systems - Four-valve distributors (PN 20 MPa and 31.5 MPa)
JB/T 2001.45-1999 — Water systems - Four-valve distributors (with servomotor) (PN 20 MPa, 31.5 MPa)
JB/T 2001.46-1999 — Water systems - Air charging valves for pump stations (PN 20 MPa, 31.5 MPa)
JB/T 2001.47-1999 — Water systems - Air shut-off valve cores for pump stations (PN 20 MPa and 31.5 MPa)
JB/T 2001.48-1999 — Water systems - Air gate valves for pump stations (PN 31.5 MPa)
JB/T 2001.49-1999 — Water systems - Air gate valves for pump stations (PN 20 MPa)
JB/T 2001.50-1999 — Water systems - Cylindrical accumulator water vessels for pump stations (PN 31.5 MPa)
JB/T 2001.51-1999 — Water systems - Cylindrical accumulator air tanks for pump stations (PN 31.5 MPa)
JB/T 2001.52-1999 — Water systems - Cylindrical accumulator water vessels for pump stations (PN 20 MPa)
JB/T 2001.53-1999 — Water systems - Cylindrical accumulator air vessels for pump stations (PN 20 MPa)
JB/T 2001.54-1999 — Water systems - Spherical accumulator water tanks for pump stations (PN 31.5 MPa)
JB/T 2001.55-1999 — Water systems - Spherical accumulator air vessels for pump stations - Types and dimensions (PN 31.5 MPa)
JB/T 2001.56-1999 — Water systems - Spherical accumulator water vessels for pump stations (PN 20 MPa)
JB/T 2001.57-1999 — Water systems - Spherical accumulator air vessels for pump stations - Types and dimensions (PN 20 MPa)
JB/T 2001.58-1999 — Water systems - Water level indicators for pump stations
JB/T 2001.59-1999 — Water systems - Minimum level valve cores for pump stations (PN 20 MPa and 31.5 MPa)
JB/T 2001.60-1999 — Water systems - Minimum level valves for pump stations (PN 31.5 MPa)
JB/T 2001.61-1999 — Water systems - Minimum level valves for pump stations (PN 20 MPa)
JB/T 2001.63-1999 — Water systems - Filters for pump stations (PN 31.5 MPa)
JB/T 2001.64-1999 — Water systems - Filters for pump stations (PN 20 MPa)
JB/T 2001.65-1999 — Water systems - Emulsion mixing tanks for pump stations - Types and dimensions
JB/T 2001.66-1999 — Water systems - Water tanks for pump stations - Types and dimensions
JB/T 2001.67-1999 — Water systems - Water tank supports for pump stations - Types and dimensions
JB/T 2001.68-1999 — Water systems - Single pipe clamps - Types and dimensions
JB/T 2001.69-1999 — Water systems - Follow-up rotary valves DN15
JB/T 2001.70-1999 — Water systems - Oil pressure drive units
JB/T 2001.71-1999 — Water systems - Oil pressure actuators - Types and dimensions
JB/T 2001.72-1999 — Water systems - Water pressure actuators - Types and dimensions
JB/T 2001.73-1999 — Water systems - 45° buttress threads - Thread profile and basic dimensions
JB/T 2001.74-1999 — Water systems - Nuts - Types and dimensions
Standards on related subjects:
GB/T 2351-2021 — Fluid power systems and components - Outside diameters of tubes and inside diameters of hoses
GB/T 2350-2020 — Fluid power systems and components - Cylinder piston rod thread types and dimensions
JB/T 8727-2004 — Hydraulic hose assemblies
JB/T 7737-2025 — Piston and vane air motors
JB/T 6948-2025 — Reduced air motor
5 Classification and status
Chinese Standard Classification (CCS): J 20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 2001.62
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2001.62-1999 | Water systems - Solenoid distributors for pump stations (PN 20 MPa and 31.5 MPa) | current edition | Current |
| JB 2065-1984 | Water systems - Solenoid distributors for pump stations (PN 20 MPa and 31.5 MPa) | previous edition | Superseded |
This page sells the current edition, JB/T 2001.62-1999. Earlier editions are listed for reference only.
How to Download JB/T 2001.62-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 2001.63-1999 — Water systems - Filters for pump stations (PN 31.5 MPa)
JB/T 2001.61-1999 — Water systems - Minimum level valves for pump stations (PN 20 MPa)
JB/T 2001.64-1999 — Water systems - Filters for pump stations (PN 20 MPa)
Secure payment via Stripe
Payments accepted
JB/T 2001.62-1999
$40.00