JB/T 2462.8-2017Modular units for modular machine tools - Part 8: Slide units (long table type) - Parameters and dimensions (English PDF)
组合机床通用部件 第8部分：滑台(长台面型) 参数和尺寸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2462.8-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 9, 2017
Implementation date
October 1, 2017
Scope
JB/T 2462.8-2017 is the English-translated version of 组合机床通用部件 第8部分：滑台(长台面型) 参数和尺寸.
JB/T 2462.8-2017 is Part 8 of the recommended Chinese machinery industry standard on modular units for modular machine tools, and its subject is the slide unit of the long table type.
It gives the parameters of the slide and the dimensions that make it interchangeable, and it is written for the long table slides of modular machine tools and of their automatic lines.
It replaces JB/T 2462.8-1999. It quotes GB/T 158-1996. The Chinese classification is J58 and the international classification 25.080.99, and the Ministry of Industry and Information Technology issued it.
Found what you need?
Document preview — JB/T 2462.8-2017
National Standard of the People's Republic of China
- ICS
- 25.080.99
- Replacing
- JB/T 2462.8-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 2462.8-2017 was issued by MIIT on 9 January 2017 and has been in force since 1 October 2017.
It replaces the earlier edition JB/T 2462.8-1999.
It is one of 55 parts of the JB/T 2462 series.
2 Scope
This standard is Part 8 of the recommended Chinese machinery industry standard on modular units for modular machine tools, and its subject is the slide unit of the long table type. It gives the parameters of the slide and the dimensions that make it interchangeable, and it is written for the long table slides of modular machine tools and of their automatic lines. It replaces JB/T 2462.8-1999. It quotes GB/T 158-1996. The Chinese classification is J58 and the international classification 25.080.99, and the Ministry of Industry and Information Technology issued it.
3 Normative references
JB/T 2462.8-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 158-1996 — Machine tool tables. T-slots and corresponding bolts
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 2462.1-1999 — General-purpose units for modular machine tools - Multi-spindle turret units - Parameters and dimensions
JB/T 2462.1-2015 — Part 1: Multi-spindle turret power units - Parameters and dimensions
JB/T 2462.2-1999 — General-purpose units for modular machine tools - Multi-spindle turret boxes - Parameters and dimensions
JB/T 2462.2-2015 — Part 2: Multi-spindle turret power case - Parameters and dimensions
JB/T 2462.3-1999 — General-purpose units for modular machine tools - Single-spindle turret units - Parameters and dimensions
JB/T 2462.3-2015 — Part 3: Single-spindle turret power units - Parameters and dimensions
JB/T 2462.4-1999 — General-purpose units for modular machine tools - Drive shafts for single-spindle turret units - Parameters and dimensions
JB/T 2462.4-2015 — Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions
JB/T 2462.5-1999 — General-purpose units for modular machine tools - Drilling spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.5-2015 — Part 5: Drilling spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.6-1999 — General-purpose units for modular machine tools - Boring spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.6-2015 — Modular units for machine tool construction - Part 6: Boring spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.7-1999 — General-purpose units for modular machine tools - Milling spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.7-2015 — Modular units for machine tool construction - Part 7: Milling spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.9-1999 — General-purpose units for modular machine tools - Cross slides - Parameters and dimensions
JB/T 2462.9-2017 — Part 9: Cross feed units - Parameters and dimensions
JB/T 2462.10-1999 — General-purpose units for modular machine tools - Single-spindle tapping units - Parameters and dimensions
JB/T 2462.10-2017 — Part 10: Single-spindle tapping heads - Parameters and dimensions
JB/T 2462.11-1999 — General-purpose units for modular machine tools - Multi-spindle drilling heads - Parameters and dimensions
JB/T 2462.11-2017 — Part 11: Multi-spindle drilling heads - Parameters and dimensions
JB/T 2462.12-1999 — General-purpose units for modular machine tools - Multi-spindle tapping units - Parameters and dimensions
JB/T 2462.12-2017 — Part 12: Multi-spindle tapping heads - Parameters and dimensions
JB/T 2462.13-1999 — General-purpose units for modular machine tools - Circular bases - Dimensions
JB/T 2462.13-2017 — Part 13: Rotary table bases - Dimensions
JB/T 2462.14-1999 — General-purpose units for modular machine tools - Floor-type centre bases - Dimensions
JB/T 2462.14-2017 — Part 14: Floor-type intermediate bases - Dimensions
JB/T 2462.15-1999 — General-purpose units for modular machine tools - Side supports (radial type) - Dimensions
JB/T 2462.15-2025 — Part 15: Side support (radial) - Dimensions
JB/T 2462.16-1999 — General-purpose units for modular machine tools - Polygonal centre bases - Parameters and dimensions
JB/T 2462.16-2025 — Part 16: Polygonal middle column - Parameters and dimensions
JB/T 2462.17-1999 — General-purpose units for modular machine tools - Bases - Dimensions
JB/T 2462.17-2025 — Part 17: Base - Dimensions
JB/T 2462.18-1999 — General-purpose units for modular machine tools - Adjustable supports - Dimensions
JB/T 2462.18-2025 — Part 18: Adjustable support - Dimensions
JB/T 2462.19-1999 — General-purpose units for modular machine tools - Fixed supports - Dimensions
JB/T 2462.19-2025 — Part 19: Anchor support - Dimensions
JB/T 2462.20-1999 — General-purpose units for modular machine tools - Columns (for long table slides) - Dimensions
JB/T 2462.20-2025 — Part 20: Column (for slide with long table surface) - Dimensions
JB/T 2462.21-1999 — General-purpose units for modular machine tools - Compound columns - Dimensions
JB/T 2462.21-2025 — Part 21: Combination - Dimensions
JB/T 2462.22-1999 — General-purpose units for modular machine tools - Pneumatic units - Parameters and dimensions
JB/T 2462.22-2025 — Part 22: Pneumatic power head- Date - Dimensions
JB/T 2462.23-1999 — General-purpose units for modular machine tools - Adjustable cylindrical supports for pneumatic units - Parameters and dimensions
JB/T 2462.23-2025 — Part 23: Adjustable cylindrical support for pneumatic power head - Parameters and dimension
JB/T 2462.24-1999 — General-purpose units for modular machine tools - Single-spindle drilling heads - Dimensions
JB/T 2462.24-2025 — Part 24: Single drill head - Dimensions
JB/T 2462.25-1999 — General-purpose units for modular machine tools - Single-spindle milling heads - Dimensions
JB/T 2462.25-2025 — Part 25: Single milling head - Dimensions
JB/T 2462.26-1999 — General-purpose units for modular machine tools - Single-spindle boring and facing heads - Dimensions
JB/T 2462.26-2025 — Part 26: Single boring and face-turning head - Dimensions
JB/T 2462.27-1999 — General-purpose units for modular machine tools - Facing heads - Dimensions
JB/T 2462.27-2025 — Part 27: Face-turning plate - Dimensions
JB/T 2462.28-1999 — General-purpose units for modular machine tools - Multi-station moving tables - Dimensions
JB/T 2462.28-2025 — Part 28: Multi-station travelling table - Dimensions
Other editions:
JB/T 2462.8-1999 (earlier edition)
6 Classification and status
International classification (ICS): 25.080.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 2462.8
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2462.8-2017 | Modular units for modular machine tools - Part 8: Slide units (long table type) - Parameters and dimensions | current edition | Current |
| JB/T 2462.8-1999 | Modular units for modular machine tools - Part 8: Slide units (long table type) - Parameters and dimensions | previous edition | Superseded |
This page sells the current edition, JB/T 2462.8-2017. Earlier editions are listed for reference only.
How to Download JB/T 2462.8-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 158-1996 — Machine tool tables. T-slots and corresponding bolts
JB/T 2462.9-2017 — Modular units for modular machine tools - Part 9: Cross feed units - Parameters and dimensions
JB/T 2462.7-1999 — General-purpose units for modular machine tools - Milling spindles for single-spindle turret units - Parameters and dimensions
Secure payment via Stripe
Payments accepted
JB/T 2462.8-2017
$85.00