JB/T 2462.7-2015Modular units for machine tool construction - Part 7: Milling spindles for single-spindle turret power units - Parameters and dimensions (English PDF)
组合机床通用部件 第7部分：单轴转塔动力头用铣削轴 参数和尺寸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2462.7-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 2462.7-2015 is the English-translated version of 组合机床通用部件 第7部分：单轴转塔动力头用铣削轴 参数和尺寸.
JB/T 2462.7-2015 is a recommended Chinese machinery industry standard, Part 7 of the modular units for machine tool construction, and it treats the milling spindles of single-spindle turret power units.
It fixes the parameters and the dimensions of these milling spindles as used on modular machine tools. Its field of application is the milling spindle mounted on a single-spindle turret power head.
It quotes JB/T 2462.4-2015. It replaces JB/T 2462.7-1999. The standard carries Chinese classification J58 and international classification 25.080.99.
Found what you need?
Document preview — JB/T 2462.7-2015
National Standard of the People's Republic of China
- ICS
- 25.080.99
- Replacing
- JB/T 2462.7-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 2462.7-2015 was issued by MIIT on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 2462.7-1999.
It is one of 55 parts of the JB/T 2462 series.
2 Scope
This standard is a recommended Chinese machinery industry standard, Part 7 of the modular units for machine tool construction, and it treats the milling spindles of single-spindle turret power units. It fixes the parameters and the dimensions of these milling spindles as used on modular machine tools. Its field of application is the milling spindle mounted on a single-spindle turret power head. It quotes JB/T 2462.4-2015. It replaces JB/T 2462.7-1999. The standard carries Chinese classification J58 and international classification 25.080.99.
3 Normative references
JB/T 2462.7-2015 cites the following standards, which apply in full or in part through the references made to them in its clauses.
JB/T 2462.4-2015 — Modular units for modular machine tools - Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 2462.1-1999 — General-purpose units for modular machine tools - Multi-spindle turret units - Parameters and dimensions
JB/T 2462.1-2015 — Modular units for modular machine tools - Part 1: Multi-spindle turret power units - Parameters and dimensions
JB/T 2462.2-1999 — General-purpose units for modular machine tools - Multi-spindle turret boxes - Parameters and dimensions
JB/T 2462.2-2015 — Modular units for modular machine tools - Part 2: Multi-spindle turret power case - Parameters and dimensions
JB/T 2462.3-1999 — General-purpose units for modular machine tools - Single-spindle turret units - Parameters and dimensions
JB/T 2462.3-2015 — Modular units for modular machine tools - Part 3: Single-spindle turret power units - Parameters and dimensions
JB/T 2462.4-1999 — General-purpose units for modular machine tools - Drive shafts for single-spindle turret units - Parameters and dimensions
JB/T 2462.4-2015 — Modular units for modular machine tools - Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions
JB/T 2462.5-1999 — General-purpose units for modular machine tools - Drilling spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.5-2015 — Modular units for modular machine tools - Part 5: Drilling spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.6-1999 — General-purpose units for modular machine tools - Boring spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.6-2015 — Part 6: Boring spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.8-1999 — General-purpose units for modular machine tools - Slides (long table type) - Parameters and dimensions
JB/T 2462.8-2017 — Modular units for modular machine tools - Part 8: Slide units (long table type) - Parameters and dimensions
JB/T 2462.9-1999 — General-purpose units for modular machine tools - Cross slides - Parameters and dimensions
JB/T 2462.9-2017 — Modular units for modular machine tools - Part 9: Cross feed units - Parameters and dimensions
JB/T 2462.10-1999 — General-purpose units for modular machine tools - Single-spindle tapping units - Parameters and dimensions
JB/T 2462.10-2017 — Modular units for modular machine tools - Part 10: Single-spindle tapping heads - Parameters and dimensions
JB/T 2462.11-1999 — General-purpose units for modular machine tools - Multi-spindle drilling heads - Parameters and dimensions
JB/T 2462.11-2017 — Modular units for modular machine tools - Part 11: Multi-spindle drilling heads - Parameters and dimensions
JB/T 2462.12-1999 — General-purpose units for modular machine tools - Multi-spindle tapping units - Parameters and dimensions
JB/T 2462.12-2017 — Modular units for modular machine tools - Part 12: Multi-spindle tapping heads - Parameters and dimensions
JB/T 2462.13-1999 — General-purpose units for modular machine tools - Circular bases - Dimensions
JB/T 2462.13-2017 — Modular units for modular machine tools - Part 13: Rotary table bases - Dimensions
JB/T 2462.14-1999 — General-purpose units for modular machine tools - Floor-type centre bases - Dimensions
JB/T 2462.14-2017 — Modular units for modular machine tools - Part 14: Floor-type intermediate bases - Dimensions
JB/T 2462.15-1999 — General-purpose units for modular machine tools - Side supports (radial type) - Dimensions
JB/T 2462.15-2025 — Modular units for modular machine tools - Part 15: Side support (radial) - Dimensions
JB/T 2462.16-1999 — General-purpose units for modular machine tools - Polygonal centre bases - Parameters and dimensions
JB/T 2462.16-2025 — Modular units for modular machine tools - Part 16: Polygonal middle column - Parameters and dimensions
JB/T 2462.17-1999 — General-purpose units for modular machine tools - Bases - Dimensions
JB/T 2462.17-2025 — Modular units for modular machine tools - Part 17: Base - Dimensions
JB/T 2462.18-1999 — General-purpose units for modular machine tools - Adjustable supports - Dimensions
JB/T 2462.18-2025 — Modular units for modular machine tools - Part 18: Adjustable support - Dimensions
JB/T 2462.19-1999 — General-purpose units for modular machine tools - Fixed supports - Dimensions
JB/T 2462.19-2025 — Modular units for modular machine tools - Part 19: Anchor support - Dimensions
JB/T 2462.20-1999 — General-purpose units for modular machine tools - Columns (for long table slides) - Dimensions
JB/T 2462.20-2025 — Modular units for modular machine tools - Part 20: Column (for slide with long table surface) - Dimensions
JB/T 2462.21-1999 — General-purpose units for modular machine tools - Compound columns - Dimensions
JB/T 2462.21-2025 — Modular units for modular machine tools - Part 21: Combination - Dimensions
JB/T 2462.22-1999 — General-purpose units for modular machine tools - Pneumatic units - Parameters and dimensions
JB/T 2462.22-2025 — Modular units for modular machine tools - Part 22: Pneumatic power head- Date - Dimensions
JB/T 2462.23-1999 — General-purpose units for modular machine tools - Adjustable cylindrical supports for pneumatic units - Parameters and dimensions
JB/T 2462.23-2025 — Modular units for modular machine tools - Part 23: Adjustable cylindrical support for pneumatic power head - Parameters and dimension
JB/T 2462.24-1999 — General-purpose units for modular machine tools - Single-spindle drilling heads - Dimensions
JB/T 2462.24-2025 — Modular units for modular machine tools - Part 24: Single drill head - Dimensions
JB/T 2462.25-1999 — General-purpose units for modular machine tools - Single-spindle milling heads - Dimensions
JB/T 2462.25-2025 — Modular units for modular machine tools - Part 25: Single milling head - Dimensions
JB/T 2462.26-1999 — General-purpose units for modular machine tools - Single-spindle boring and facing heads - Dimensions
JB/T 2462.26-2025 — Modular units for modular machine tools - Part 26: Single boring and face-turning head - Dimensions
JB/T 2462.27-1999 — General-purpose units for modular machine tools - Facing heads - Dimensions
JB/T 2462.27-2025 — Modular units for modular machine tools - Part 27: Face-turning plate - Dimensions
JB/T 2462.28-1999 — General-purpose units for modular machine tools - Multi-station moving tables - Dimensions
JB/T 2462.28-2025 — Modular units for modular machine tools - Part 28: Multi-station travelling table - Dimensions
Other editions:
JB/T 2462.7-1999 (earlier edition)
6 Classification and status
International classification (ICS): 25.080.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 2462.7
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2462.7-2015 | Modular units for machine tool construction - Part 7: Milling spindles for single-spindle turret power units - Parameters and dimensions | current edition | Current |
| JB/T 2462.7-1999 | Modular units for machine tool construction - Part 7: Milling spindles for single-spindle turret power units - Parameters and dimensions | previous edition | Superseded |
This page sells the current edition, JB/T 2462.7-2015. Earlier editions are listed for reference only.
How to Download JB/T 2462.7-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 2462.4-2015 — Modular units for modular machine tools - Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions
JB/T 2462.8-2017 — Modular units for modular machine tools - Part 8: Slide units (long table type) - Parameters and dimensions
JB/T 2462.6-1999 — General-purpose units for modular machine tools - Boring spindles for single-spindle turret units - Parameters and dimensions
Secure payment via Stripe
Payments accepted
JB/T 2462.7-2015
$129.00