JB/T 2462.5-2015Modular units for modular machine tools - Part 5: Drilling spindles for single-spindle turret power units - Parameters and dimensions (English PDF)
组合机床通用部件 第5部分：单轴转塔动力头用钻削轴 参数和尺寸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2462.5-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 2462.5-2015 is the English-translated version of 组合机床通用部件 第5部分：单轴转塔动力头用钻削轴 参数和尺寸.
JB/T 2462.5-2015 is a recommended Chinese machinery industry standard and Part 5 of the modular units for modular machine tools, the part on drilling spindles for single-spindle turret power units.
It states the parameters and the dimensions of the drilling spindle fitted to the single-spindle turret power head of a modular machine tool. Single-spindle turret power heads carrying a drilling spindle are what it applies to.
It quotes JB/T 2462.4-2015. It replaces JB/T 2462.5-1999. It carries Chinese classification J58 and international classification 25.080.99.
Found what you need?
Document preview — JB/T 2462.5-2015
National Standard of the People's Republic of China
- ICS
- 25.080.99
- Replacing
- JB/T 2462.5-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 2462.5-2015 was issued by MIIT on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 2462.5-1999.
It is one of 55 parts of the JB/T 2462 series.
2 Scope
This standard is a recommended Chinese machinery industry standard and Part 5 of the modular units for modular machine tools, the part on drilling spindles for single-spindle turret power units. It states the parameters and the dimensions of the drilling spindle fitted to the single-spindle turret power head of a modular machine tool. Single-spindle turret power heads carrying a drilling spindle are what it applies to. It quotes JB/T 2462.4-2015. It replaces JB/T 2462.5-1999. It carries Chinese classification J58 and international classification 25.080.99.
3 Normative references
JB/T 2462.5-2015 cites the following standards, which apply in full or in part through the references made to them in its clauses.
JB/T 2462.4-2015 — Modular units for modular machine tools - Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 2462.1-1999 — General-purpose units for modular machine tools - Multi-spindle turret units - Parameters and dimensions
JB/T 2462.1-2015 — Part 1: Multi-spindle turret power units - Parameters and dimensions
JB/T 2462.2-1999 — General-purpose units for modular machine tools - Multi-spindle turret boxes - Parameters and dimensions
JB/T 2462.2-2015 — Part 2: Multi-spindle turret power case - Parameters and dimensions
JB/T 2462.3-1999 — General-purpose units for modular machine tools - Single-spindle turret units - Parameters and dimensions
JB/T 2462.3-2015 — Part 3: Single-spindle turret power units - Parameters and dimensions
JB/T 2462.4-1999 — General-purpose units for modular machine tools - Drive shafts for single-spindle turret units - Parameters and dimensions
JB/T 2462.4-2015 — Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions
JB/T 2462.6-1999 — General-purpose units for modular machine tools - Boring spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.6-2015 — Modular units for machine tool construction - Part 6: Boring spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.7-1999 — General-purpose units for modular machine tools - Milling spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.7-2015 — Modular units for machine tool construction - Part 7: Milling spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.8-1999 — General-purpose units for modular machine tools - Slides (long table type) - Parameters and dimensions
JB/T 2462.8-2017 — Part 8: Slide units (long table type) - Parameters and dimensions
JB/T 2462.9-1999 — General-purpose units for modular machine tools - Cross slides - Parameters and dimensions
JB/T 2462.9-2017 — Part 9: Cross feed units - Parameters and dimensions
JB/T 2462.10-1999 — General-purpose units for modular machine tools - Single-spindle tapping units - Parameters and dimensions
JB/T 2462.10-2017 — Part 10: Single-spindle tapping heads - Parameters and dimensions
JB/T 2462.11-1999 — General-purpose units for modular machine tools - Multi-spindle drilling heads - Parameters and dimensions
JB/T 2462.11-2017 — Part 11: Multi-spindle drilling heads - Parameters and dimensions
JB/T 2462.12-1999 — General-purpose units for modular machine tools - Multi-spindle tapping units - Parameters and dimensions
JB/T 2462.12-2017 — Part 12: Multi-spindle tapping heads - Parameters and dimensions
JB/T 2462.13-1999 — General-purpose units for modular machine tools - Circular bases - Dimensions
JB/T 2462.13-2017 — Part 13: Rotary table bases - Dimensions
JB/T 2462.14-1999 — General-purpose units for modular machine tools - Floor-type centre bases - Dimensions
JB/T 2462.14-2017 — Part 14: Floor-type intermediate bases - Dimensions
JB/T 2462.15-1999 — General-purpose units for modular machine tools - Side supports (radial type) - Dimensions
JB/T 2462.15-2025 — Part 15: Side support (radial) - Dimensions
JB/T 2462.16-1999 — General-purpose units for modular machine tools - Polygonal centre bases - Parameters and dimensions
JB/T 2462.16-2025 — Part 16: Polygonal middle column - Parameters and dimensions
JB/T 2462.17-1999 — General-purpose units for modular machine tools - Bases - Dimensions
JB/T 2462.17-2025 — Part 17: Base - Dimensions
JB/T 2462.18-1999 — General-purpose units for modular machine tools - Adjustable supports - Dimensions
JB/T 2462.18-2025 — Part 18: Adjustable support - Dimensions
JB/T 2462.19-1999 — General-purpose units for modular machine tools - Fixed supports - Dimensions
JB/T 2462.19-2025 — Part 19: Anchor support - Dimensions
JB/T 2462.20-1999 — General-purpose units for modular machine tools - Columns (for long table slides) - Dimensions
JB/T 2462.20-2025 — Part 20: Column (for slide with long table surface) - Dimensions
JB/T 2462.21-1999 — General-purpose units for modular machine tools - Compound columns - Dimensions
JB/T 2462.21-2025 — Part 21: Combination - Dimensions
JB/T 2462.22-1999 — General-purpose units for modular machine tools - Pneumatic units - Parameters and dimensions
JB/T 2462.22-2025 — Part 22: Pneumatic power head- Date - Dimensions
JB/T 2462.23-1999 — General-purpose units for modular machine tools - Adjustable cylindrical supports for pneumatic units - Parameters and dimensions
JB/T 2462.23-2025 — Part 23: Adjustable cylindrical support for pneumatic power head - Parameters and dimension
JB/T 2462.24-1999 — General-purpose units for modular machine tools - Single-spindle drilling heads - Dimensions
JB/T 2462.24-2025 — Part 24: Single drill head - Dimensions
JB/T 2462.25-1999 — General-purpose units for modular machine tools - Single-spindle milling heads - Dimensions
JB/T 2462.25-2025 — Part 25: Single milling head - Dimensions
JB/T 2462.26-1999 — General-purpose units for modular machine tools - Single-spindle boring and facing heads - Dimensions
JB/T 2462.26-2025 — Part 26: Single boring and face-turning head - Dimensions
JB/T 2462.27-1999 — General-purpose units for modular machine tools - Facing heads - Dimensions
JB/T 2462.27-2025 — Part 27: Face-turning plate - Dimensions
JB/T 2462.28-1999 — General-purpose units for modular machine tools - Multi-station moving tables - Dimensions
JB/T 2462.28-2025 — Part 28: Multi-station travelling table - Dimensions
Other editions:
JB/T 2462.5-1999 (earlier edition)
6 Classification and status
International classification (ICS): 25.080.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 2462.5
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2462.5-2015 | Modular units for modular machine tools - Part 5: Drilling spindles for single-spindle turret power units - Parameters and dimensions | current edition | Current |
| JB/T 2462.5-1999 | Modular units for modular machine tools - Part 5: Drilling spindles for single-spindle turret power units - Parameters and dimensions | previous edition | Superseded |
This page sells the current edition, JB/T 2462.5-2015. Earlier editions are listed for reference only.
How to Download JB/T 2462.5-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 2462.4-2015 — Modular units for modular machine tools - Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions
JB/T 2462.6-2015 — Modular units for machine tool construction - Part 6: Boring spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.4-1999 — General-purpose units for modular machine tools - Drive shafts for single-spindle turret units - Parameters and dimensions
Secure payment via Stripe
Payments accepted
JB/T 2462.5-2015
$129.00