JB/T 2647-1995Belt conveyors - Technical specifications for packaging (English PDF)
带式输送机 包装技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2647-1995 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 1, 1995
Implementation date
July 1, 1996
Scope
JB/T 2647-1995 is the English-translated version of 带式输送机 包装技术条件.
JB/T 2647-1995 is the Chinese standard "Belt conveyors - Technical specifications for packaging".
Its scope clause reads: This standard specifies the technical requirements of products before packing, technical requirements for case packing and nude packing, packing form of parts, technical requirements for packing case, accompanying technical documents, packing mark, acceptance rules and test methods for packing case in relation to belt conveyor.
This standard is applicable to the transport packages of the belt conveyor products that are used for conveying various (blocks and particles) bulk materials and work pieces.
Its clauses include subject contents and application scope; technical requirements of products before packing.
Found what you need?
Document preview — JB/T 2647-1995
National Standard of the People's Republic of China
- Replacing
- JB 2647-1979
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Subject Contents and Application Scope
- 2 Normative References
- 3 Technical Requirements of Products before Packing
- 4 Technical Requirements for Case Packing and Nude Packing
- 5 Packing Form of Parts
- 6 Technical Requirements for Packing Case
- 7 Accompanying Technical Documents
- 8 Packing Mark
- 9 Acceptance Rules
- 10 Test Methods for Packing Case
1 Subject Contents and Application Scope
This standard specifies the technical requirements of products before packing, technical requirements for case packing and nude packing, packing form of parts, technical requirements for packing case, accompanying technical documents, packing mark, acceptance rules and test methods for packing case in relation to belt conveyor.
This standard is applicable to the transport packages of the belt conveyor products that are used for conveying various (blocks and particles) bulk materials and work pieces.
2 Normative References
GB 191 "Packaging-Pictorial Marking for Handling of Goods"
GB 326 "Paper Base Petroleum Asphalt Felt and Asphalt Paper"
GB 1413 "Freight Containers--External Dimensions and Ratings"
GB 1834 "Minimum Internal Dimensions for General Purpose Freight Containers"
GB/T 4857.9 "Packaging—Complete, Filled Transport Packages—Water Spray Test"
GB 4879 "Rustproof Packaging"
GB 5398 "Test Methods for Large Transport Packages"
GB/T 13384 "General Specifications for Packing of Mechanical and Electrical Product"
3 Technical Requirements of Products before Packing
3.1
The spare parts of belt conveyor product shall not be packed until they pass the inspection.
3.2
The packing list shall be formulated in accordance with the requirements of product design drawing and technological documents. The contents of packing list shall include the product name, spare part drawing No., quantity, packing form, case No. and weight, etc.
3.3
The surfaces of spare parts shall be cleared off oil stain, water and foreign bodies, the metallic finished surfaces shall be sealed up for rust protection according to the relevant requirements of "Rustproof Packaging" (GB 4879).
3.4
The pipe joints and flange joints on the product shall be blocked up with choke plugs, the external screw thread part shall be packed well with oil-immersed linen and be fastened up with iron wire, and corresponding the marks or serial numbers shall be made. The purchased parts, like steel wire rope, shall be oiled and be warped up with oilpaper or plastic paper.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 2647
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2647-1995 | Belt conveyors - Technical specifications for packaging | current edition | Current |
| JB 2647-1979 | Belt conveyors - Technical specifications for packaging | previous edition | Superseded |
This page sells the current edition, JB/T 2647-1995. Earlier editions are listed for reference only.
How to Download JB/T 2647-1995
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 2647-1995
$85.00