JB/T 2195-2011Specification for YDF2 series three-phase induction motor applying to electromotion device of valve (English PDF)
YDF2系列阀门电动装置用三相异步电动机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2195-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 2195-2011 is the English-translated version of YDF2系列阀门电动装置用三相异步电动机技术条件.
JB/T 2195-2011 is a recommended Chinese machinery industry standard giving the specification for the YDF2 series of three-phase induction motors built for valve actuators.
It covers the types of motor, the basic parameters and dimensions, the technical requirements, the test methods and inspection rules, and the marking, packaging and warranty provisions.
It applies to motors for ordinary valve electric actuators, and the various motor series derived from the YDF2 series may also be handled by reference to it. Among the standards it quotes are GB 755-2008, GB/T 997-2008, GB/T 1032-2005, GB 1971-2006, GB 10068-2008, GB/T 12665-2008 and GB 14711-2006. It replaces JB/T 2195-1998.
Found what you need?
Document preview — JB/T 2195-2011
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Replacing
- JB/T 2195-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 2195-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
It replaces the earlier edition JB/T 2195-1998.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the specification for the YDF2 series of three-phase induction motors built for valve actuators. It covers the types of motor, the basic parameters and dimensions, the technical requirements, the test methods and inspection rules, and the marking, packaging and warranty provisions. It applies to motors for ordinary valve electric actuators, and the various motor series derived from the YDF2 series may also be handled by reference to it. Among the standards it quotes are GB 755-2008, GB/T 997-2008, GB/T 1032-2005, GB 1971-2006, GB 10068-2008, GB/T 12665-2008 and GB 14711-2006. It replaces JB/T 2195-1998.
JB/T 2195-2011 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 997-2008 — Rotating electrical machines - Classification of types of construction, mounting arrangements and terminal box position (IM Code)
GB/T 1032-2005 — Three-phase asynchronous motor test methods
GB 1971-2006 — Rotating Electrical Machines - Terminal Markings and Direction of Rotation
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 4772.1-1999 — Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080
GB/T 4942.1- 2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB 10068-2008
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12665-2008 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB/T 22719.1-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods
GB/T 22719.2-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 2: Test limits
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 2195-1998 (earlier edition)
Standards on related subjects:
GB/T 1032-2023 — Test methods for three-phase asynchronous motors
GB/T 13957-2022 — Technical requirements for the fundamental series of three-phase large asynchronous motor
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 7118-2025 — YVF Series (IP55) Variable Frequency Speed Control Three-Phase Asynchronous Motors Technical Specifications (Frame Sizes 63 to 355)
JB/T 5275-2022 — Specification for YE2-W and YE2-WF series outdoor and outdoor chemical corrosion-resistant three-phase induction motors (frame size 63 to 355)
JB/T 5271-2022 — Specification for YE2 series (IP23) three-phase induction motors (frame size 160~400)
6 Classification and status
International classification (ICS): 29.160.30
Chinese Standard Classification (CCS): K 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1032-2005Test methods for three-phase asynchronous motors
- GB 1971-2006Rotating Electrical Machines - Terminal Markings and Direction of Rotation
- GB/T 1993-1993Cooling methods for rotating electrical machines
Similar standards
Editions of JB/T 2195
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2195-2011 | Specification for YDF2 series three-phase induction motor applying to electromotion device of valve | current edition | Current |
| JB/T 2195-1998 | Specification for YDF2 series three-phase induction motor applying to electromotion device of valve | previous edition | Superseded |
This page sells the current edition, JB/T 2195-2011. Earlier editions are listed for reference only.
How to Download JB/T 2195-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB 1971-2006 — Rotating Electrical Machines - Terminal Markings and Direction of Rotation
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
JB/T 2195-2011
$165.00