JB/T 2298-2014Dual-chain Drawbench (English PDF)
双链式冷拔机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2298-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 2298-2014 is the English-translated version of 双链式冷拔机.
JB/T 2298-2014 is the recommended Chinese machinery industry standard for the dual-chain drawbench, the machine that pulls bar and tube to size through a die.
It fixes the types of the machine and its basic parameters, then the technical requirements, the test methods and the inspection rules, and finally the marking, packaging, transport and storage.
The machines it governs are those drawing ferrous and non-ferrous metal stock. It carries the Chinese classification H94 and the international classification 25.120.20 for drawing and extruding machines.
Among the standards it cites are GB/T 1184, GB/T 1243, GB/T 1804-2000, GB/T 5014, GB/T 5015, GB/T 10095.1-2008, several parts of JB/T 5000, JB/T 6394, JB/T 6397 and JB/T 7929-1999.
It replaces JB/T 2298-2001. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 2298-2014
National Standard of the People's Republic of China
- ICS
- 25.120.20
- Replacing
- JB/T 2298-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 2298-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 2298-2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for the dual-chain drawbench, the machine that pulls bar and tube to size through a die. It fixes the types of the machine and its basic parameters, then the technical requirements, the test methods and the inspection rules, and finally the marking, packaging, transport and storage. The machines it governs are those drawing ferrous and non-ferrous metal stock. It carries the Chinese classification H94 and the international classification 25.120.20 for drawing and extruding machines. Among the standards it cites are GB/T 1184, GB/T 1243, GB/T 1804-2000, GB/T 5014, GB/T 5015, GB/T 10095.1-2008, several parts of JB/T 5000, JB/T 6394, JB/T 6397 and JB/T 7929-1999. It replaces JB/T 2298-2001.
JB/T 2298-2014 falls under ICS 25.120.20, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1184
GB/T 1243
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 5014
GB/T 5015
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments
JB/T 5000.6
JB/T 5000.8
JB/T 5000.12
JB/T 5000.13
JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings
JB/T 6394
JB/T 6397
JB/T 7929-1999 — Cleanliness of gear drive units
JB/T 5000.7
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 2298-2001 (earlier edition)
Standards on related subjects:
GB/T 13314-2025 — Forged steel work rolls for cold rolling - General technical specifications
GB/T 1504-2024 — Cast iron rolls
YB/T 4064-2015 — Technical specifications of pay-off reel mandrel and tension reel mandrel for metal strip
JB/T 3164-2025 — Roller plate straightening machine - Technical Specifications
JB/T 1465-2025 — Roller plate straightening machine - Basic parameters
JB/T 2094-2024 — Hot Saw Machine
6 Classification and status
International classification (ICS): 25.120.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1243Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 5014Pin coupling elastomer
- GB/T 5015Gear coupling with elastomer
- GB/T 10095.1-2008Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
Editions of JB/T 2298
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2298-2014 | Dual-chain Drawbench | current edition | Current |
| JB/T 2298-2001 | Dual-chain Drawbench | previous edition | Superseded |
This page sells the current edition, JB/T 2298-2014. Earlier editions are listed for reference only.
How to Download JB/T 2298-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1243-1997 — Short pitch transmission precision roller chains and chain wheels
JB/T 2298-2014
$145.00