JB/T 7929-1999Cleanliness of gear drive units (English PDF)
齿轮传动装置清洁度
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7929-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 24, 1999
Implementation date
January 1, 2000
Scope
JB/T 7929-1999 is the English-translated version of 齿轮传动装置清洁度.
JB/T 7929-1999 is the Chinese standard "Cleanliness of gear drive units". Its scope clause reads: Cleanliness for gear drive units is an examination index of product quality which is determined by the weight of impurity collected from the inner cavity of the gearbox by specified methods.
This standard specifies the determination of the cleanliness for gear drive units with separate box and its objective evaluation value, and is applicable to for the acceptance of finished products and the acceptance after overhaul.
This standard is not applicable to gear drive units which are lubricated by grease and centralized circulation oil. This standard allows the acceptance of gear drive units according to the cleanliness determined by the agreement between the manufacturers and the users or the purchase contract. Its clauses include determination method.
Found what you need?
Document preview — JB/T 7929-1999
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative References
- 3 Determination Methods
- 4 Objective Evaluation Criteria
1 Scope
Cleanliness for gear drive units is an examination index of product quality which is determined by the weight of impurity collected from the inner cavity of the gearbox by specified methods.
This standard specifies the determination of the cleanliness for gear drive units with separate box and its objective evaluation value, and is applicable to for the acceptance of finished products and the acceptance after overhaul.
This standard is not applicable to gear drive units which are lubricated by grease and centralized circulation oil.
This standard allows the acceptance of gear drive units according to the cleanliness determined by the agreement between the manufacturers and the users or the purchase contract.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB/T 6004-1985 "Test Sieves of Metal Wire Cloth"
GB/T 1922-1980 "Solvent Naphthas"
3 Determination Method
3.1 Apparatus and cleaning fluid for determination
3.1.1 Instruments
a) Brushes: including big round-shaped, cone-shaped and oblate-shaped nylon brushes etc;
b) Filter sieves: SSW 0.063/0.045 GB/T 6004 (235 meshes/inch in British system), SSW 0.032/0.028 GB/T 6004 (423 meshes/inch in British system) c) Necessary vessels and tools.
3.1.2 Equipment
a) Analytical balance with the sensibility of 1/10000g;
b) Oven;
c) Dryer;
3.1.3 Cleaning fluid
Solvent naphthas (NY-120 GB/T 1922 is recommended), kerosene and acetone.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- NB/T 11443-2023General technical specification of controlled start transmission
- GB/T 37400.10-2019Heavy machinery general technical specification - Part 10: Assembling
- FZ/T 93046-2018Comber for cotton
- YC/T 10.12-2018Tobacco Machinery General Technical Conditions Part 12: Assembly
- GB/T 15112-2017Shaft sinking winch
- JB/T 13006-2017Single-rope drum mine hoists and mine winches with underground explosion-proof electrical equipment
Similar standards
How to Download JB/T 7929-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 7929-1999
$169.00