JB/T 6041-2013Drive axles of wheeled construction machinery - Final drive gear pairs - Technical requirements (English PDF)
轮式工程机械驱动桥 主减速器齿轮副 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6041-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 6041-2013 is the English-translated version of 轮式工程机械驱动桥 主减速器齿轮副 技术条件.
JB/T 6041-2013 is a recommended Chinese machinery industry standard for the final drive gear pair in the drive axle of wheeled construction machinery. It states the requirements placed on the gear pair, the test methods used to check it and the inspection rules applied to it, and it covers marking, packaging, transportation and storage as well.
Its field of application is the drive axle of wheeled construction machinery. It replaces JB/T 6041-1992. Among the standards it quotes are GB/T 2829, GB/T 3478.1-2008, GB/T 3480.5-2008, GB/T 5216-2004, GB/T 11365-1989, GB/T 15822.1, JB/T 5928, JB/T 5942 and JB/T 51148. It carries the classifications P97 and 53.100.
Found what you need?
Document preview — JB/T 6041-2013
National Standard of the People's Republic of China
- ICS
- 53.100
- Replacing
- JB/T 6041-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6041-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 6041-1992.
2 Scope
JB/T 6041-2013 is a recommended Chinese machinery industry standard for the final drive gear pair in the drive axle of wheeled construction machinery. It states the requirements placed on the gear pair, the test methods used to check it and the inspection rules applied to it, and it covers marking, packaging, transportation and storage as well. Its field of application is the drive axle of wheeled construction machinery. It replaces JB/T 6041-1992. Among the standards it quotes are GB/T 2829, GB/T 3478.1-2008, GB/T 3480.5-2008, GB/T 5216-2004, GB/T 11365-1989, GB/T 15822.1, JB/T 5928, JB/T 5942 and JB/T 51148. It carries the classifications P97 and 53.100.
3 Normative references
JB/T 6041-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2829
GB/T 3478.1-2008 — Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities
GB/T 3478.2-2008 — Straight cylindrical involute splines -- Metric module, side fit -- Part 2: 30-degreepressure angle dimensions tables
GB/T 3480.5-2008
GB/T 5216-2004 — Structural steels subject to end-quench hardenability requirements
GB/T 11365-1989
GB/T 15822.1
JB/T 5928
JB/T 5929
JB/T 5942
JB/T 5944
JB/T 51148
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6041-1992 (earlier edition)
6 Classification and status
International classification (ICS): 53.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 3478.1-2008Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities
- GB/T 3478.2-2008Straight cylindrical involute splines -- Metric module, side fit -- Part 2: 30-degreepressure angle dimensions tables
- GB/T 3480.5-2008Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials
- GB/T 5216-2004Structural steels with specified hardenability bands
- GB/T 11365-1989Bevel gears - ISO system of accuracy
Similar standards
Editions of JB/T 6041
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6041-2013 | Drive axles of wheeled construction machinery - Final drive gear pairs - Technical requirements | current edition | Current |
| JB/T 6041-1992 | Drive axles of wheeled construction machinery - Final drive gear pairs - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 6041-2013. Earlier editions are listed for reference only.
How to Download JB/T 6041-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15822.1-2005 — Non-destructive testing -- Magnetic particle testing -- Part 1: General principles
GB/T 15822.1-2024 — Non-destructive testing - Magnetic particle testing - Part 1: General principles
GB/T 2829-2025 — Sampling procedures and tables for periodic inspection by attributes
Secure payment via Stripe
Payments accepted
JB/T 6041-2013
$135.00