JB/T 51148-1994Wheel loaders - Reliability test methods, failure classification and assessment (English PDF)
轮式装载机 可靠性试验方法、故障分类及评定
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 51148-1994 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 17, 1990
Implementation date
January 1, 1991
Scope
JB/T 51148-1994 is the English-translated version of 轮式装载机 可靠性试验方法、故障分类及评定.
JB/T 51148-1994 is a recommended standard of the Chinese machinery industry dealing with the reliability of wheel loaders. It lays down the test methods for these machines, the way the reliability characteristic quantities are calculated from the test results, and the classification and assessment of the failures observed.
The methods are meant for wheel loaders in series production, once the design has been finalised. GB 3187, GB 8419, JB 3688.3 and JB/T 51026 are cited in the text.
The document takes over from JB/Q 140-1990, the earlier internal specification on the same subject.
Found what you need?
Document preview — JB/T 51148-1994
National Standard of the People's Republic of China
- Replacing
- JB/Q 140-1990
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 51148-1994 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 August 1990.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 20 pages in English translation.
2 Scope Preview
This standard is a recommended standard of the Chinese machinery industry dealing with the reliability of wheel loaders. It lays down the test methods for these machines, the way the reliability characteristic quantities are calculated from the test results, and the classification and assessment of the failures observed. The methods are meant for wheel loaders in series production, once the design has been finalised. GB 3187, GB 8419, JB 3688.3 and JB/T 51026 are cited in the text. The document takes over from JB/Q 140-1990, the earlier internal specification on the same subject.
JB/T 51148-1994 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB 3187
GB 8419
JB 3688.3
JB/T 51026
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 20 pages
5 Classification and status
Chinese Standard Classification (CCS): J 83
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
GB 3187 · GB 8419 · JB 3688.3 · JB/T 51026
Similar standards
Editions of JB/T 51148
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 51148-1994 | Wheel loaders - Reliability test methods, failure classification and assessment | current edition | Current |
| JB/Q 140-1990 | Wheel loaders - Reliability test methods, failure classification and assessment | previous edition | Superseded |
This page sells the current edition, JB/T 51148-1994. Earlier editions are listed for reference only.
How to Download JB/T 51148-1994
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 51148-1994
$409.00