JB/T 12463-2015Wheel loaders - Reliability test procedures, failure classification and evaluation (English PDF)
轮胎式装载机 可靠性试验方法、失效分类及评定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12463-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12463-2015 is the English-translated version of 轮胎式装载机 可靠性试验方法、失效分类及评定.
JB/T 12463-2015 is the Chinese machinery industry standard covering wheel loaders - Reliability test procedures, failure classification and evaluation. It was issued on 10 October 2015 and has been in force since 1 March 2016, replacing JB/T 51148-1994.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2015 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 12463-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 51148-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Test methods
- 4.1 Test conditions
- 4.2 Preparation before the test
- 4.3 Test procedure
- 5 Classification and assessment of the failures
- 5.1 Classification of the failures
- 5.2 Rules for assessing the failures
- 5.3 Statistical method of the assessment
- 5.4 Test records
- Annex A (informative) Record forms of the reliability test
- Table 1 Grading of the failures and decision rules
- Table A.1 Record form of the shift of the reliability test
- Table A.2 Summary form of the failures of the reliability test
- Table A.3 Summary form of the results of the reliability test
3 Terms and definitions
4 Test methods
5 Classification and assessment of the failures
Foreword
This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.
It replaces JB/T 51148-1994.
The document is under the responsibility of the Ministry of Industry and Information Technology.
About this edition
JB/T 12463-2015 is the current edition. It was issued on 10 October 2015 and has been in force since 1 March 2016, replacing JB/T 51148-1994.
JB/T 51148-1994 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
JB/T 12463-2015 replaces JB/T 51148-1994. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
JB/T 12463-2015 carries no ICS number in the official record.
The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.
How this standard is designated
The full designation is JB/T 12463-2015. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 12463
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 12463-2015 | Wheel loaders - Reliability test procedures, failure classification and evaluation | current edition | Current |
| JB/T 51148-1994 | Wheel loaders - Reliability test procedures, failure classification and evaluation | previous edition | Superseded |
This page sells the current edition, JB/T 12463-2015. Earlier editions are listed for reference only.
How to Download JB/T 12463-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 12463-2015
$199.00