JB/T 11414-2013Reliability assessment of combined fuel injection pump assemblies - Evaluation methods, bench test methods, failure classification and criteria (English PDF)
合成式喷油泵总成可靠性考核 评定方法、台架试验方法、故障分类及判定规则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11414-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11414-2013 is the English-translated version of 合成式喷油泵总成可靠性考核 评定方法、台架试验方法、故障分类及判定规则.
JB/T 11414-2013 is the Chinese machinery industry standard for assessing the reliability of combined diesel fuel injection pump assemblies. It sets out the methods by which that reliability is evaluated, the bench test procedures that support the evaluation, and the way failures are classified and judged.
Its field of application is the combined diesel fuel injection pump assembly itself. The standard replaces JB/T 51178-2000. Among the standards it quotes are GB 252, GB/T 5770, GB/T 8029, JB/T 8121, JB/T 9734 and JB/T 9735.
It carries the Chinese classification J94 and the international classifications 27.020 and 43.060.40.
Found what you need?
Document preview — JB/T 11414-2013
National Standard of the People's Republic of China
- ICS
- 27.020; 43.060.40
- Replacing
- JB/T 51178-2000
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 11414-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
2 Scope
JB/T 11414-2013 is the Chinese machinery industry standard for assessing the reliability of combined diesel fuel injection pump assemblies. It sets out the methods by which that reliability is evaluated, the bench test procedures that support the evaluation, and the way failures are classified and judged. Its field of application is the combined diesel fuel injection pump assembly itself. The standard replaces JB/T 51178-2000. Among the standards it quotes are GB 252, GB/T 5770, GB/T 8029, JB/T 8121, JB/T 9734 and JB/T 9735. It carries the Chinese classification J94 and the international classifications 27.020 and 43.060.40.
3 Normative references
JB/T 11414-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 252
GB/T 5770
GB/T 8029
JB/T 8121
JB/T 9734
JB/T 9735
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 27.020; 43.060.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 252General diesel fuels
- GB/T 5770Jerk fuel injection pump for diesel engine - Specifications
- GB/T 8029Calibration fluid for diesel injection pump
- JB/T 8121High-pressure pipe assemblies for diesel fuel injection pump test benches
- JB/T 9734Fuel injection pump test bench - Specifications
- JB/T 9735Calibrating fuel injector for fuel injection pump test bench - Specifications
Cited by
- GB/T 5770-2020Jerk fuel injection pump for diesel engine - Specifications
- JB/T 12852.1-2016Combined electronic unit pump assemblies for diesel engines - Part 1: Technical requirements
- JB/T 12852.2-2016Combined electronic unit pump assemblies for diesel engines - Part 2: Test methods
- JB/T 11415-2013Reliability assessment of in-line fuel injection pump assemblies - Evaluation methods, bench test methods, failure classification and criteria
- JB/T 11416-2013Reliability assessment of fuel injector assemblies - Evaluation methods, test methods, failure classification and criteria
Similar standards
Editions of JB/T 11414
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 11414-2013 | Reliability assessment of combined fuel injection pump assemblies - Evaluation methods, bench test methods, failure classification and criteria | current edition | Current |
| JB/T 51178-2000 | Reliability assessment of combined fuel injection pump assemblies - Evaluation methods, bench test methods, failure classification and criteria | previous edition | Superseded |
This page sells the current edition, JB/T 11414-2013. Earlier editions are listed for reference only.
How to Download JB/T 11414-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 252-2015 — General diesel fuels
GB/T 5770-2020 — Jerk fuel injection pump for diesel engine - Specifications
GB/T 8029-2010 — Calibration fluid for diesel injection pump
Secure payment via Stripe
Payments accepted
JB/T 11414-2013
$165.00