JB/T 8121-2011High-pressure pipe assemblies for diesel fuel injection pump test benches (English PDF)
柴油机喷油泵试验台用高压油管组件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8121-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 8121-2011 is the English-translated version of 柴油机喷油泵试验台用高压油管组件.
JB/T 8121-2011 is a recommended Chinese machinery industry standard for the high-pressure pipe assemblies used on diesel fuel injection pump test benches. It specifies the structure and the dimensions of the assembly, its technical conditions, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
The standard applies to high-pressure pipe assemblies of every kind employed on test benches when diesel fuel injection pumps are tested and adjusted. It quotes JB/T 6014 and JB/T 8120.1, and it replaces JB/T 8121-1999.
The catalogue places the document under Chinese classification J94, with international classifications 27.020 and 43.060.40.
Found what you need?
Document preview — JB/T 8121-2011
National Standard of the People's Republic of China
- ICS
- 27.020; 43.060.40
- Replacing
- JB/T 8121-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8121-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 8121-1999, JB/T 8121-1995.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the high-pressure pipe assemblies used on diesel fuel injection pump test benches. It specifies the structure and the dimensions of the assembly, its technical conditions, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. The standard applies to high-pressure pipe assemblies of every kind employed on test benches when diesel fuel injection pumps are tested and adjusted. It quotes JB/T 6014 and JB/T 8120.1, and it replaces JB/T 8121-1999. The catalogue places the document under Chinese classification J94, with international classifications 27.020 and 43.060.40.
JB/T 8121-2011 falls under ICS 27.020; 43.060.40, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 6014
JB/T 8120.1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 8121-1999 (earlier edition)
JB/T 8121-1995 (earlier edition)
Standards on related subjects:
JB/T 5089.3-2020 — Internal combustion engines - Paper element oil filters - Part 3: Test methods
JB/T 10505-2016 — Internal combustion engines - Oil radiators - Specification
JB/T 51023-1999 — Gasoline filter assemblies - Product quality grading
JB/T 5079.1-2025 — Small and medium power internal combustion engines - fuel tank - Part 1: Metal fuel tank - Technical Specifications
JB/T 8120.2-2011 — Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
JB/T 8120.1-2011 — Compression ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
6 Classification and status
International classification (ICS): 27.020; 43.060.40
Chinese Standard Classification (CCS): J 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- GB/T 14096-2025Fuel injection pump test stand - Testing method
- GB/T 25366-2022Electronically controlled common rail systems for diesel engines - Rail assembly
- GB/T 5770-2020Jerk fuel injection pump for diesel engine - Specifications
- JB/T 12852.2-2016Combined electronic unit pump assemblies for diesel engines - Part 2: Test methods
- JB/T 11412-2013Electronic-controlled Distributor Fuel Injection Pump of Diesel Engine - Specifications
- JB/T 11414-2013Reliability assessment of combined fuel injection pump assemblies - Evaluation methods, bench test methods, failure classification and criteria
Similar standards
Editions of JB/T 8121
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8121-2011 | High-pressure pipe assemblies for diesel fuel injection pump test benches | current edition | Current |
| JB/T 8121-1999 | High-pressure pipe assemblies for diesel fuel injection pump test benches | previous edition | Superseded |
This page sells the current edition, JB/T 8121-2011. Earlier editions are listed for reference only.
How to Download JB/T 8121-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 6014-1992 — Technical requirements for high pressure fuel pipe assemblies of diesel engines
JB/T 6014-2000 — Diesel engines - High pressure fuel injection pipe assemblies - Technical requirements
JB/T 6014-2011 — Diesel engines - Technical requirements for high-pressure fuel injection pipe assemblies
JB/T 8121-2011
$105.00