JB/T 8120.1-2011Compression ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes (English PDF)
压燃式发动机 高压油管用钢管 第1部分:单壁冷拉无缝钢管技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8120.1-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 8120.1-2011 is the English-translated version of 压燃式发动机 高压油管用钢管 第1部分:单壁冷拉无缝钢管技术条件.
JB/T 8120.1-2011 is a recommended Chinese machinery industry standard on the steel tubes used for the high-pressure fuel injection pipes of compression ignition engines, and it is the part that deals with seamless cold-drawn single-wall tubes.
It gives the dimensions and tolerances, the material technology, the testing, the methods of marking and identification, and the labelling and packaging, for the high-pressure pipes of the engine, called type 2 tubes, and for high-pressure pump testing, called type 1 tubes.
Its field is diesel, that is compression ignition, engines. The standard is an identical adoption of ISO 8535-1:2006, quotes ISO 404, ISO 6507-1, ISO 6892 and ISO 12345, and replaces JB/T 8120.1-2000.
Found what you need?
Document preview — JB/T 8120.1-2011
National Standard of the People's Republic of China
- ICS
- 27.020
- Replacing
- JB/T 8120.1-2000
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8120.1-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.
It replaces the earlier edition JB/T 8120.1-2000.
It is one of 4 parts of the JB/T 8120 series.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on the steel tubes used for the high-pressure fuel injection pipes of compression ignition engines, and it is the part that deals with seamless cold-drawn single-wall tubes. It gives the dimensions and tolerances, the material technology, the testing, the methods of marking and identification, and the labelling and packaging, for the high-pressure pipes of the engine, called type 2 tubes, and for high-pressure pump testing, called type 1 tubes. Its field is diesel, that is compression ignition, engines. The standard is an identical adoption of ISO 8535-1:2006, quotes ISO 404, ISO 6507-1, ISO 6892 and ISO 12345, and replaces JB/T 8120.1-2000.
JB/T 8120.1-2011 falls under ICS 27.020, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
ISO 404
ISO 6507-1
ISO 6892
ISO 12345
4 Where this standard sits
It cites 4 standards, listed in full above.
It is one part of the JB/T 8120 series, of which this catalogue holds 4 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 8120-1995 — Diesel engine with high pressure seamless steel pipe
JB/T 8120.2-2000 — Part 2: Requirements for composite tubes
JB/T 8120.2-2011 — Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
Other editions:
JB/T 8120.1-2000 (earlier edition)
Standards on related subjects:
JB/T 5089.3-2020 — Internal combustion engines - Paper element oil filters - Part 3: Test methods
JB/T 10505-2016 — Internal combustion engines - Oil radiators - Specification
JB/T 51023-1999 — Gasoline filter assemblies - Product quality grading
JB/T 5079.1-2025 — Small and medium power internal combustion engines - fuel tank - Part 1: Metal fuel tank - Technical Specifications
JB/T 8121-2011 — High-pressure pipe assemblies for diesel fuel injection pump test benches
7 Classification and status
International classification (ICS): 27.020
Chinese Standard Classification (CCS): J 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 404 · ISO 6507-1 · ISO 6892 · ISO 12345
Cited by
- JB/T 6014-2011Diesel engines - Technical requirements for high-pressure fuel injection pipe assemblies
- JB/T 8121-2011High-pressure pipe assemblies for diesel fuel injection pump test benches
- GB/T 10826.4-2008Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors
- TB/T 2983-2000Magnetic particle inspection of railroad wheels
Similar standards
Editions of JB/T 8120.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8120.1-2011 | Compression ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes | current edition | Current |
| JB/T 8120.1-2000 | Compression ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes | previous edition | Superseded |
This page sells the current edition, JB/T 8120.1-2011. Earlier editions are listed for reference only.
How to Download JB/T 8120.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8120.2-2011 — Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
JB/T 8120.2-2000 — Compression ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
JB/T 8120.1-2000 — Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
JB/T 8120.1-2011
$175.00