JB/T 8120.1-2000Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes (English PDF)
压燃式发动机 高压油管用钢管 第1部分:单壁冷拉无缝钢管技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8120.1-2000 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 31, 2000
Implementation date
January 1, 2001
Scope
JB/T 8120.1-2000 is the English-translated version of 压燃式发动机 高压油管用钢管 第1部分:单壁冷拉无缝钢管技术条件.
JB/T 8120.1-2000 is the Chinese machinery industry standard covering compression-ignition engines - Steel tubes for high-pressure fuel injection pipes, Part 1: Requirements for seamless cold-drawn single-wall tubes.
It was issued on 31 August 2000 and has been in force since 1 January 2001, replacing JB/T 8120-1995. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2000 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8120.1-2000
National Standard of the People's Republic of China
- Replacing
- JB/T 8120-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8120.1-2000 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 August 2000.
It is one of 4 parts of the JB/T 8120 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 8120.1-2000 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
2 other standards in this catalogue cite it, among them GB/T 10826.4-2008, TB/T 2983-2000.
It is one part of the JB/T 8120 series, of which this catalogue holds 4 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 8120-1995 — Diesel engine with high pressure seamless steel pipe
JB/T 8120.2-2000 — Compression ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
JB/T 8120.2-2011 — Part 2: Requirements for composite tubes
Other editions:
JB/T 8120.1-2011 (later edition)
Standards on related subjects:
JB/T 5089.3-2020 — Internal combustion engines - Paper element oil filters - Part 3: Test methods
JB/T 10505-2016 — Internal combustion engines - Oil radiators - Specification
JB/T 51023-1999 — Gasoline filter assemblies - Product quality grading
JB/T 5239.4-2026 — Diesel engines - Diesel filters - Part 4: Test method
JB/T 8121-2011 — High-pressure pipe assemblies for diesel fuel injection pump test benches
6 Classification and status
Chinese Standard Classification (CCS): J 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 6014-2011Diesel engines - Technical requirements for high-pressure fuel injection pipe assemblies
- JB/T 8121-2011High-pressure pipe assemblies for diesel fuel injection pump test benches
- GB/T 10826.4-2008Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors
- TB/T 2983-2000Magnetic particle inspection of railroad wheels
Similar standards
Editions of JB/T 8120.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8120.1-2000 | Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes | current edition | Current |
| JB/T 8120-1995 | Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes | previous edition | Superseded |
This page sells the current edition, JB/T 8120.1-2000. Earlier editions are listed for reference only.
How to Download JB/T 8120.1-2000
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8120.2-2011 — Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
JB/T 8120.2-2000 — Compression ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
JB/T 8120.1-2011 — Compression ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
JB/T 8120.1-2000
$135.00