JB/T 6126-2010Vertical raw material and clinker roller mills (English PDF)
立式原料/熟料辊磨机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6126-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 21, 2011
Implementation date
April 1, 2011
Scope
JB/T 6126-2010 is the English-translated version of 立式原料/熟料辊磨机.
JB/T 6126-2010 is a recommended Chinese machinery industry standard on vertical roller mills for raw material and clinker. It sets out their types and basic parameters, the technical requirements, the test methods and the inspection rules, and it covers marking, packaging, transport and storage.
The mills it governs are those used to grind cement raw materials, cement clinker, medium-hard limestone and gypsum. The standard carries the Chinese classification D94 and the international classification 73.120.
Among the standards it quotes are GB/T 3766, GB 5226.1, GB/T 9239.1-2006 and JB/T 5000.3-2007.
Found what you need?
Document preview — JB/T 6126-2010
National Standard of the People's Republic of China
- ICS
- 73.120
- Replacing
- JB/T 6126-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 6126-2010 was issued by MIIT on 21 January 2011 and has been in force since 1 April 2011.
It replaces the earlier edition JB/T 6126-2002.
2 Scope
This standard is a recommended Chinese machinery industry standard on vertical roller mills for raw material and clinker. It sets out their types and basic parameters, the technical requirements, the test methods and the inspection rules, and it covers marking, packaging, transport and storage. The mills it governs are those used to grind cement raw materials, cement clinker, medium-hard limestone and gypsum. The standard carries the Chinese classification D94 and the international classification 73.120. Among the standards it quotes are GB/T 3766, GB 5226.1, GB/T 9239.1-2006 and JB/T 5000.3-2007.
3 Normative references
JB/T 6126-2010 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 191
GB/T 699-1999
GB/T 700-2006 — Carbon structural steels
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1345
GB/T 1348
GB/T 1801-2009
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3766
GB/T 3768
GB 5226.1
GB/T 5680
GB/T 7233.1-2009
GB/T 7932
GB/T 7935
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 11345-1989
GB/T 13306
JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments
JB/T 5000.6-2007 — General technical requirements for heavy machinery - Part 6: Steel castings
JB/T 5000.8
JB/T 5000.12
JB/T 5000.13
JB/T 7929-1999 — Cleanliness of gear drive units
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6126-2002 (earlier edition)
6 Classification and status
International classification (ICS): 73.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 699-1999Quality carbon structure steels
- GB/T 700-2006Carbon structural steels
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1345Methods for testing cement fineness — Sieve analysis
- GB/T 1348Spheroidal graphite iron castings
GB/T 1801-2009 · GB 5226.1
Similar standards
Editions of JB/T 6126
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6126-2010 | Vertical raw material and clinker roller mills | current edition | Current |
| JB/T 6126-2002 | Vertical raw material and clinker roller mills | previous edition | Superseded |
This page sells the current edition, JB/T 6126-2010. Earlier editions are listed for reference only.
How to Download JB/T 6126-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13306-2011 — Plates
GB/T 1345-2005 — The test sieving method for fineness of cement
Secure payment via Stripe
Payments accepted
JB/T 6126-2010
$135.00