JB/T 10997-2018Vertical roller mills for slag cement (English PDF)
矿渣水泥立磨
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10997-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2018
Implementation date
December 1, 2018
Scope
JB/T 10997-2018 is the English-translated version of 矿渣水泥立磨.
JB/T 10997-2018 is the Chinese machinery industry standard for slag vertical roller mills, the vertical mills used for grinding slag cement.
It fixes their types and basic parameters and the technical requirements, adds the requirements for commissioning and trial operation, and then gives the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
It quotes GB/T 1184-1996, GB/T 1801-2009, GB/T 1804-2000, GB/T 3766, GB 5226.1, GB/T 7233.1-2009, GB/T 8074, GB/T 9444-2007, GB/T 11345-2013, GB/T 13384 and GB/T 25706, among others. It replaces JB/T 10997-2010 and is classified D94 and 73.120.
Found what you need?
Document preview — JB/T 10997-2018
National Standard of the People's Republic of China
- ICS
- 73.120
- Replacing
- JB/T 10997-2010
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 10997-2018 was issued by MIIT on 30 April 2018 and has been in force since 1 December 2018.
It replaces the earlier edition JB/T 10997-2010.
2 Scope
This standard is the Chinese machinery industry standard for slag vertical roller mills, the vertical mills used for grinding slag cement. It fixes their types and basic parameters and the technical requirements, adds the requirements for commissioning and trial operation, and then gives the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. It quotes GB/T 1184-1996, GB/T 1801-2009, GB/T 1804-2000, GB/T 3766, GB 5226.1, GB/T 7233.1-2009, GB/T 8074, GB/T 9444-2007, GB/T 11345-2013, GB/T 13384 and GB/T 25706, among others. It replaces JB/T 10997-2010 and is classified D94 and 73.120.
3 Normative references
JB/T 10997-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1801-2009
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3766
GB 5226.1
GB/T 7233.1-2009
GB/T 7935
GB/T 8074
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 9444-2007
GB/T 10095.1-2008
GB/T 10095.2-2008
GB/T 11345-2013
GB/T 13306
GB/T 13384
GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
GB/T 25706
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10997-2010 (earlier edition)
6 Classification and status
International classification (ICS): 73.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 7233.1-2009Steel castings - Ultrasonic testing - Part 1: Steel castings for general purposes
- GB/T 7935Hydraulic fluid power - General requirements for hydraulic components
- GB/T 8074Testing method for specific surface of cement - Blaine method
GB/T 1801-2009 · GB 5226.1
Similar standards
Editions of JB/T 10997
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10997-2018 | Vertical roller mills for slag cement | current edition | Current |
| JB/T 10997-2010 | Vertical roller mills for slag cement | previous edition | Superseded |
This page sells the current edition, JB/T 10997-2018. Earlier editions are listed for reference only.
How to Download JB/T 10997-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13306-2011 — Plates
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
Secure payment via Stripe
Payments accepted
JB/T 10997-2018
$319.00