Valid

JB/T 2306-1999Single-line grease pumps and units - Types, parameters and dimensions (English PDF)

单线干油泵及装置型式、参数与尺寸

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 2306-1999 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 28, 1999

Implementation date

January 1, 2000

Scope

JB/T 2306-1999 is the English-translated version of 单线干油泵及装置型式、参数与尺寸.

JB/T 2306-1999 is the Chinese machinery industry standard covering single-line grease pumps and units - Types, parameters and dimensions. It was issued on 28 June 1999 and has been in force since 1 January 2000, replacing JB 2306-1978.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1999 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 2306-1999

National Standard of the People's Republic of China

Replacing: JB 2306-1978

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

[Preview only]
1 Scope
2 Normative references
3 Terms and definitions
3.1 Type
3.2 Basic parameters
4 Types and basic parameters
4.1 Types
4.2 Model designation
4.3 Nominal operating conditions
4.4 Safety and hygiene
4.5 Welding
4.6 Bridge (After crane operation mechanism assembled)
4.7 Assembly
4.8 Electrical control equipment
4.9 Steel pretreatment and painting
5 Technical requirements
5.1 General requirements
5.2 Safety requirements
5.3 Cold and hot working forming
5.4 Rated load test
5.5 Whole machine noise test
5.6 Static rigidity test
5.7 Dynamic load test
5.8 Crane span deviation
5.9 Diagonal difference of bridge
6 Test methods
6.1 Exit-factory inspection
6.2 Type inspection
7 Inspection rules
7.1 Marking
7.2 Packaging, transportation and storage
7.3 Transportation
7.4 Storage
8 Marking, packaging, transportation and storage
9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 2306-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 June 1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 2306-1999 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

JB/T 2306-2018 (later edition)

Standards on related subjects:

GB/T 2350-2020 — Fluid power systems and components - Cylinder piston rod thread types and dimensions

JB/T 6374-2020 — Silicon carbide sealing rings for mechanical seals - Technical requirements

JB/T 8872-2016 — Technical requirements for carbon-graphite sealing rings for mechanical seals

JB/T 4121-2025 — Heavy machinery - Lubrication product model compilation method

JB/T 2302-2022 — Duplex basket strainers - Types, parameters and dimensions

JB/T 2304-2018 — Electric lubrication pump units - Types, parameters and dimensions (20 MPa)

5 Classification and status

Chinese Standard Classification (CCS): J 21

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

JB/T 1050-2006|JB/T 9799.1-1999|JB/T 2304-2018|JB/T 8522-2014|JB/T 2304-2001|JB/T 8522-1997

Editions of JB/T 2306

Edition	Title	Revision	Status
JB/T 2306-1999	Single-line grease pumps and units - Types, parameters and dimensions	current edition	Current
JB 2306-1978	Single-line grease pumps and units - Types, parameters and dimensions	previous edition	Superseded

This page sells the current edition, JB/T 2306-1999. Earlier editions are listed for reference only.

How to Download JB/T 2306-1999

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.