Valid

JB/T 2001.54-1999Water systems - Spherical accumulator water tanks for pump stations (PN 31.5 MPa) (English PDF)

水系统 泵站用球形蓄势器水罐(PN=31.5MPa)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 2001.54-1999 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 1, 1999

Implementation date

January 1, 1999

Scope

JB/T 2001.54-1999 is the English-translated version of 水系统 泵站用球形蓄势器水罐(PN=31.5MPa).

JB/T 2001.54-1999 is the Chinese machinery industry recommended standard for the spherical accumulator water tanks of pump stations. It gives the types and dimensions of the tank together with its technical requirements, and it applies to spherical accumulators working at a nominal pressure of 31.5 MPa with water and air as the media.

The vessel holds the energy that a pump and accumulator driven water system gives back on demand. The part is used with JB/T 2001.55-1999 and belongs to the J20 group of the Chinese classification. It replaces JB 2057-1984. It was issued on 1 January 1999.

Found what you need?

Document preview — JB/T 2001.54-1999

National Standard of the People's Republic of China

ICS
23.100

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 2001.54-1999 is issued by Ministry of Industry and Information Technology of the People's Republic of China.

It is one of 75 parts of the JB/T 2001 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese machinery industry recommended standard for the spherical accumulator water tanks of pump stations. It gives the types and dimensions of the tank together with its technical requirements, and it applies to spherical accumulators working at a nominal pressure of 31.5 MPa with water and air as the media. The vessel holds the energy that a pump and accumulator driven water system gives back on demand. The part is used with JB/T 2001.55-1999 and belongs to the J20 group of the Chinese classification. It replaces JB 2057-1984. It was issued on 1 January 1999.

JB/T 2001.54-1999 falls under ICS 23.100, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

JB/T 2001.55-1999 — Water systems - Spherical accumulator air vessels for pump stations - Types and dimensions (PN 31.5 MPa)

4 Where this standard sits

It cites one other standard, JB/T 2001.55-1999, listed in full above.

It is one part of the JB/T 2001 series, of which this catalogue holds 75 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 2001-2018 — Water system

JB/T 2001.1-1999 — Water systems - Plunger glands - Types and dimensions (PN 31.5 MPa)

JB/T 2001.2-1999 — Water systems - Plunger glands - Types and dimensions (PN 20 MPa)

JB/T 2001.3-1999 — Water systems - Guide sleeves - Types and dimensions

JB/T 2001.4-1999 — Water systems - Support rings for U-type fabric rubber seals - Types and dimensions

JB/T 2001.5-1999 — Water systems - Copper flange gaskets - Types and dimensions

JB/T 2001.6-1999 — Water systems - Oval attachment flanges - Types and dimensions (PN 31.5 MPa)

JB/T 2001.7-1999 — Water systems - Square attachment flanges - Types and dimensions (PN 31.5 MPa)

JB/T 2001.8-1999 — Water systems - Round flanges - Types and dimensions (PN 31.5 MPa)

JB/T 2001.9-1999 — Water systems - Square flanges - Types and dimensions (PN 20 MPa)

JB/T 2001.10-1999 — Water systems - Round attachment flanges - Types and dimensions (PN 20 MPa)

JB/T 2001.11-1999 — Water systems - Square flanges - Types and dimensions (PN 10 MPa)

JB/T 2001.12-1999 — Water systems - Round attachment flanges - Types and dimensions (PN 10 MPa)

JB/T 2001.13-1999 — Water systems - Square attachment flanges - Types and dimensions (PN 4.0 MPa)

JB/T 2001.14-1999 — Water systems - Oval connecting flanges - Types and dimensions (PN 31.5 MPa)

JB/T 2001.15-1999 — Water systems - Square connecting flanges - Types and dimensions (PN 31.5 MPa)

JB/T 2001.16-1999 — Water systems - Round connecting flanges - Types and dimensions (PN 31.5 MPa)

JB/T 2001.17-1999 — Water systems - Square connecting flanges - Types and dimensions (PN 20 MPa)

JB/T 2001.18-1999 — Water systems - Round connecting flanges - Types and dimensions (PN 20 MPa)

JB/T 2001.19-1999 — Water systems - Air bleed valves - Types and dimensions (PN up to 50 MPa)

JB/T 2001.20-1999 — Water systems - Centralized air vent valve cores (PN 31.5 MPa)

JB/T 2001.21-1999 — Water systems - Centralized air vent valves (PN 31.5 MPa)

JB/T 2001.22-1999 — Water systems - Pressure gauge cocks - Types and dimensions (PN 31.5 MPa)

JB/T 2001.23-1999 — Water systems - Screw plugs (PN 31.5 MPa)

JB/T 2001.24-1999 — Water systems - Drain plugs - Types and dimensions (PN 31.5 MPa)

JB/T 2001.25-1999 — Water systems - Distributing valve cores (PN 20 MPa, 31.5 MPa)

JB/T 2001.26-1999 — Water systems - Manual gate valve cores (PN 20 MPa, 31.5 MPa)

JB/T 2001.27-1999 — Water systems - Manual gate valves (PN 31.5 MPa)

JB/T 2001.28-1999 — Water systems - Manual gate valves (PN 20 MPa)

JB/T 2001.29-1999 — Water systems - Hydraulic gate valve cores (PN 20 MPa and 31.5 MPa)

JB/T 2001.30-1999 — Water systems - Hydraulic gate valves (PN 31.5 MPa)

JB/T 2001.31-1999 — Water systems - Hydraulic gate valves (PN 20 MPa)

JB/T 2001.32-1999 — Water systems - Screw plug type check valve cores (PN 20 MPa, 31.5 MPa)

JB/T 2001.33-1999 — Water systems - Flanged check valve cores (PN 20 MPa and 31.5 MPa)

JB/T 2001.34-1999 — Water systems - Check valves (PN 31.5 MPa)

JB/T 2001.35-1999 — Water systems - Check valves (PN 20 MPa)

JB/T 2001.36-1999 — Water systems - Prefill valve cores (PN 20 MPa, 31.5 MPa)

JB/T 2001.37-1999 — Water systems - Prefill valve actuators (type A) (PN 31.5 MPa)

JB/T 2001.38-1999 — Water systems - Prefill valves - Servomotors (type A) (PN 20 MPa)

JB/T 2001.39-1999 — Water systems - Prefill valves (PN 31.5 MPa)

JB/T 2001.40-1999 — Water systems - Prefill valves (PN 20 MPa)

JB/T 2001.41-1999 — Water systems - Overflow valves (PN 0.4 MPa, 0.8 MPa, 1.2 MPa)

JB/T 2001.42-1999 — Water systems - Prefill tanks

JB/T 2001.43-1999 — Water systems - Two-valve distributors (PN 20 MPa and 31.5 MPa)

JB/T 2001.44-1999 — Water systems - Four-valve distributors (PN 20 MPa and 31.5 MPa)

JB/T 2001.45-1999 — Water systems - Four-valve distributors (with servomotor) (PN 20 MPa, 31.5 MPa)

JB/T 2001.46-1999 — Water systems - Air charging valves for pump stations (PN 20 MPa, 31.5 MPa)

JB/T 2001.47-1999 — Water systems - Air shut-off valve cores for pump stations (PN 20 MPa and 31.5 MPa)

JB/T 2001.48-1999 — Water systems - Air gate valves for pump stations (PN 31.5 MPa)

JB/T 2001.49-1999 — Water systems - Air gate valves for pump stations (PN 20 MPa)

JB/T 2001.50-1999 — Water systems - Cylindrical accumulator water vessels for pump stations (PN 31.5 MPa)

JB/T 2001.51-1999 — Water systems - Cylindrical accumulator air tanks for pump stations (PN 31.5 MPa)

JB/T 2001.52-1999 — Water systems - Cylindrical accumulator water vessels for pump stations (PN 20 MPa)

JB/T 2001.53-1999 — Water systems - Cylindrical accumulator air vessels for pump stations (PN 20 MPa)

JB/T 2001.55-1999 — Water systems - Spherical accumulator air vessels for pump stations - Types and dimensions (PN 31.5 MPa)

JB/T 2001.56-1999 — Water systems - Spherical accumulator water vessels for pump stations (PN 20 MPa)

JB/T 2001.57-1999 — Water systems - Spherical accumulator air vessels for pump stations - Types and dimensions (PN 20 MPa)

JB/T 2001.58-1999 — Water systems - Water level indicators for pump stations

JB/T 2001.59-1999 — Water systems - Minimum level valve cores for pump stations (PN 20 MPa and 31.5 MPa)

JB/T 2001.60-1999 — Water systems - Minimum level valves for pump stations (PN 31.5 MPa)

JB/T 2001.61-1999 — Water systems - Minimum level valves for pump stations (PN 20 MPa)

JB/T 2001.62-1999 — Water systems - Solenoid distributors for pump stations (PN 20 MPa and 31.5 MPa)

JB/T 2001.63-1999 — Water systems - Filters for pump stations (PN 31.5 MPa)

JB/T 2001.64-1999 — Water systems - Filters for pump stations (PN 20 MPa)

JB/T 2001.65-1999 — Water systems - Emulsion mixing tanks for pump stations - Types and dimensions

JB/T 2001.66-1999 — Water systems - Water tanks for pump stations - Types and dimensions

JB/T 2001.67-1999 — Water systems - Water tank supports for pump stations - Types and dimensions

JB/T 2001.68-1999 — Water systems - Single pipe clamps - Types and dimensions

JB/T 2001.69-1999 — Water systems - Follow-up rotary valves DN15

JB/T 2001.70-1999 — Water systems - Oil pressure drive units

JB/T 2001.71-1999 — Water systems - Oil pressure actuators - Types and dimensions

JB/T 2001.72-1999 — Water systems - Water pressure actuators - Types and dimensions

JB/T 2001.73-1999 — Water systems - 45° buttress threads - Thread profile and basic dimensions

JB/T 2001.74-1999 — Water systems - Nuts - Types and dimensions

7 Classification and status

International classification (ICS): 23.100

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 2001.54-1999

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 2001.54-1999

$85.00