JB/T 2839-2016Brush holder and slip-ring for motor application (English PDF)
电机用刷握及集电环
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2839-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
June 1, 2016
Scope
JB/T 2839-2016 is the English-translated version of 电机用刷握及集电环.
JB/T 2839-2016 is a recommended Chinese machinery industry standard on brush holders and slip rings for motor application.
It fixes the types and sizes of RAA coil-spring and DKE pull-spring brush holders, with their technical requirements, inspection rules, marking and packaging, and it also gives the main dimensions and related requirements for the slip ring.
It is written for the brush gear and slip rings of metallurgical and lifting duty motors with a rotor winding open-circuit voltage no greater than 660 V for reversible motors and 1320 V for non-reversible ones; other wound-rotor motors may follow it for reference.
It quotes GB 755, GB/T 1176, GB/T 8733, GB 20237, JB/T 2361 and JB/T 5779. It supersedes JB/T 2839-2005.
Found what you need?
Document preview — JB/T 2839-2016
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Replacing
- JB/T 2839-2005
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 2839-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 January 2016 and has been in force since 1 June 2016.
It replaces the earlier edition JB/T 2839-2005, JB/T 2839-1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on brush holders and slip rings for motor application. It fixes the types and sizes of RAA coil-spring and DKE pull-spring brush holders, with their technical requirements, inspection rules, marking and packaging, and it also gives the main dimensions and related requirements for the slip ring. It is written for the brush gear and slip rings of metallurgical and lifting duty motors with a rotor winding open-circuit voltage no greater than 660 V for reversible motors and 1320 V for non-reversible ones; other wound-rotor motors may follow it for reference. It quotes GB 755, GB/T 1176, GB/T 8733, GB 20237, JB/T 2361 and JB/T 5779. It supersedes JB/T 2839-2005.
JB/T 2839-2016 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 1176-2013 — Casting copper and copper alloys
GB/T 8733-2007 — Aluminum alloy ingots for casting
GB 20237-2006 — Safety requirements of crane & metallurgical motors and canned motors
JB/T 2361-2007 — Constant pressure brush holders
JB/T 5779-2007 — Dimensions of brush holders for electrical machines
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 2839-2005 (earlier edition)
JB/T 2839-1992 (earlier edition)
Standards on related subjects:
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
GB/T 12665-2017 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
JB/T 7841-2025 — YZZ series three-phase asynchronous motor with electromagnetic brake for elevator - Technical Specifications
JB/T 7564-2025 — YREZ series conical winding rotor brake three-phase asynchronous motor for crane - Technical Specifications
JB/T 7563-2025 — YZE series electromagnetic brake three-phase asynchronous motor for lifting and metallurgy - Technical Specifications
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 1176-2013Casting copper and copper alloys
- GB/T 8733-2007Aluminium alloy ingots for casting
- GB 20237-2006Safety requirements of crane & metallurgical motors and canned motors
- JB/T 2361-2007Constant pressure brush holders
- JB/T 5779-2007Dimensions of brush holders for electrical machines
Similar standards
Editions of JB/T 2839
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2839-2016 | Brush holder and slip-ring for motor application | current edition | Current |
| JB/T 2839-2005 | Brush holder and slip-ring for motor application | previous edition | Superseded |
This page sells the current edition, JB/T 2839-2016. Earlier editions are listed for reference only.
How to Download JB/T 2839-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 20237-2006 — Safety requirements of crane & metallurgical motors and canned motors
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 1176-2013 — Casting copper and copper alloys
JB/T 2839-2016
$149.00