JB/T 8696-2013Technical Condition to Suction Dredge (English PDF)
吸泥机 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8696-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 8696-2013 is the English-translated version of 吸泥机 技术条件.
JB/T 8696-2013 is a recommended Chinese machinery industry standard giving the technical conditions for suction dredges, the machines that draw settled sludge from the bottom of sedimentation tanks in water treatment.
It fixes the terms and definitions, the classification and nomenclature, the technical requirements, the testing and test methods, the inspection rules and the requirements for marking and packaging.
The document sits under the Chinese classification J88 and the international classification 13.060.30. Among the standards it quotes are GB/T 191, GB 4208-2008, GB/T 8923.1-2011, GB 50205-2001 and JB/T 5000.12. It takes the place of JB/T 8696-1998.
Found what you need?
Document preview — JB/T 8696-2013
National Standard of the People's Republic of China
- ICS
- 13.060.30
- Replacing
- JB/T 8696-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8696-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 8696-1998.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the technical conditions for suction dredges, the machines that draw settled sludge from the bottom of sedimentation tanks in water treatment. It fixes the terms and definitions, the classification and nomenclature, the technical requirements, the testing and test methods, the inspection rules and the requirements for marking and packaging. The document sits under the Chinese classification J88 and the international classification 13.060.30. Among the standards it quotes are GB/T 191, GB 4208-2008, GB/T 8923.1-2011, GB 50205-2001 and JB/T 5000.12. It takes the place of JB/T 8696-1998.
JB/T 8696-2013 falls under ICS 13.060.30, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 755
GB/T 985.1-2008 — Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
GB/T 1720
GB/T 3768
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB/T 6388
GB/T 6920
GB/T 8923.1-2011 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
GB/T 9793
GB/T 11352-2009 — Carbon Steel Castings for General Engineering Purpose
GB/T 13306
GB/T 13384
GB 14048.1
GB 50017
GB 50205-2001 — Code for Acceptance of Construction quality of Steel Structures
JB/T 2300
JB/T 2839
JB/T 2932
JB/T 5000.12
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 8696-1998 (earlier edition)
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 8699-2023 — Bag filter unit
JB/T 8700-2014 — Technical Specifications to Rotor Aerator with Horizontal Shaft Used in Oxidation Ditch
JB/T 8704-2012 — Honeycomb style electric coal tar remover
6 Classification and status
International classification (ICS): 13.060.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 755Rotating Electrical Machines - Rating and Performance
- GB/T 985.1-2008Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
- GB/T 1720Circle-drawing test of coating films
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
Editions of JB/T 8696
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8696-2013 | Technical Condition to Suction Dredge | current edition | Current |
| JB/T 8696-1998 | Technical Condition to Suction Dredge | previous edition | Superseded |
This page sells the current edition, JB/T 8696-2013. Earlier editions are listed for reference only.
How to Download JB/T 8696-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 50017-2003 — Code for design of steel structures
JB/T 8696-2013
$165.00