JB/T 2800.3-2011Knee-type milling machines - Part 3: Static rigidity (English PDF)
升降台铣床 第3部分:静刚度
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2800.3-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 2800.3-2011 is the English-translated version of 升降台铣床 第3部分:静刚度.
JB/T 2800.3-2011 is a recommended Chinese machinery industry standard and is the third part of JB/T 2800, which deals with knee-type milling machines. This part is concerned with static rigidity: it gives the technical requirements on the static stiffness of the machine and the methods by which that stiffness is tested.
The machines it applies to are general purpose milling machines whose table width runs from 200 mm to 500 mm. The classification codes recorded for it are J54 in the Chinese scheme and 25.080.20 in the international scheme. It quotes GB/T 3933.2-2002 and GB/T 3933.3-2002.
Found what you need?
Document preview — JB/T 2800.3-2011
National Standard of the People's Republic of China
- ICS
- 25.080.20
- Replacing
- JB/T 9929-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 2800.3-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It is one of 6 parts of the JB/T 2800 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard and is the third part of JB/T 2800, which deals with knee-type milling machines. This part is concerned with static rigidity: it gives the technical requirements on the static stiffness of the machine and the methods by which that stiffness is tested. The machines it applies to are general purpose milling machines whose table width runs from 200 mm to 500 mm. The classification codes recorded for it are J54 in the Chinese scheme and 25.080.20 in the international scheme. It quotes GB/T 3933.2-2002 and GB/T 3933.3-2002.
JB/T 2800.3-2011 falls under ICS 25.080.20, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 3933.2-2002 — Test conditions for milling machines with table of variable height -- Testing of accuracy -- Part 2: Machines with horizontal spindle
GB/T 3933.3-2002 — Test conditions for milling machines with table of variable height -- Testing of accuracy -- Part 3: Machines with vertical spindle
4 Where this standard sits
It cites 2 standards, among them GB/T 3933.2-2002, GB/T 3933.3-2002, listed in full above.
It is one part of the JB/T 2800 series, of which this catalogue holds 6 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 2800-1992 — Knee-type milling machines - Technical specifications
JB/T 2800.1-1999 — Knee-type milling machines - Parameters
JB/T 2800.1-2011 — 1: Types and parameters
JB/T 2800.2-2006 — 2: Technical requirements
JB/T 2800.2-2021 — 2: Technical requirements
Standards on related subjects:
JB/T 12396-2015 — Proportional valve solenoids
JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements
JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements
JB/T 7421.2-2025 — Drilling and milling machine - Part 2: Specification
JB/T 6335-2025 — Radial drilling machines - Specification
7 Classification and status
International classification (ICS): 25.080.20
Chinese Standard Classification (CCS): J 54
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 2800.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2800.3-2011 | Knee-type milling machines - Part 3: Static rigidity | current edition | Current |
| JB/T 9929-1999 | Knee-type milling machines - Part 3: Static rigidity | previous edition | Superseded |
This page sells the current edition, JB/T 2800.3-2011. Earlier editions are listed for reference only.
How to Download JB/T 2800.3-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3933.2-2002 — Test conditions for milling machines with table of variable height -- Testing of accuracy -- Part 2: Machines with horizontal spindle
GB/T 3933.3-2002 — Test conditions for milling machines with table of variable height -- Testing of accuracy -- Part 3: Machines with vertical spindle
JB/T 2800.2-2006 — Knee-type milling machines - Part 2: Technical requirements
JB/T 2800.3-2011
$149.00