JB/T 2462.24-1999General-purpose units for modular machine tools - Single-spindle drilling heads - Dimensions (English PDF)
组合机床通用部件 单轴钻削头尺寸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2462.24-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 20, 1999
Implementation date
January 1, 2000
Scope
JB/T 2462.24-1999 is the English-translated version of 组合机床通用部件 单轴钻削头尺寸.
JB/T 2462.24-1999 is the Chinese machinery industry standard covering general-purpose units for modular machine tools - Single-spindle drilling heads - Dimensions.
It was issued on 20 May 1999 and has been in force since 1 January 2000, replacing JB 3195-1983. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1999 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 2462.24-1999
National Standard of the People's Republic of China
- Replacing
- JB 3195-1983
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 2462.24-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 May 1999.
It is one of 55 parts of the JB/T 2462 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 2462.24-1999 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 2462.1-1999 — Multi-spindle turret units - Parameters and dimensions
JB/T 2462.1-2015 — Modular units for modular machine tools - Part 1: Multi-spindle turret power units - Parameters and dimensions
JB/T 2462.2-1999 — Multi-spindle turret boxes - Parameters and dimensions
JB/T 2462.2-2015 — Modular units for modular machine tools - Part 2: Multi-spindle turret power case - Parameters and dimensions
JB/T 2462.3-1999 — General-purpose units for modular machine tools - Single-spindle turret units - Parameters and dimensions
JB/T 2462.3-2015 — Modular units for modular machine tools - Part 3: Single-spindle turret power units - Parameters and dimensions
JB/T 2462.4-1999 — Drive shafts for single-spindle turret units - Parameters and dimensions
JB/T 2462.4-2015 — Modular units for modular machine tools - Part 4: Drive shafts for single-spindle turret power units - Parameters and dimensions
JB/T 2462.5-1999 — Drilling spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.5-2015 — Modular units for modular machine tools - Part 5: Drilling spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.6-1999 — Boring spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.6-2015 — Modular units for machine tool construction - Part 6: Boring spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.7-1999 — Milling spindles for single-spindle turret units - Parameters and dimensions
JB/T 2462.7-2015 — Modular units for machine tool construction - Part 7: Milling spindles for single-spindle turret power units - Parameters and dimensions
JB/T 2462.8-1999 — Slides (long table type) - Parameters and dimensions
JB/T 2462.8-2017 — Modular units for modular machine tools - Part 8: Slide units (long table type) - Parameters and dimensions
JB/T 2462.9-1999 — Cross slides - Parameters and dimensions
JB/T 2462.9-2017 — Modular units for modular machine tools - Part 9: Cross feed units - Parameters and dimensions
JB/T 2462.10-1999 — General-purpose units for modular machine tools - Single-spindle tapping units - Parameters and dimensions
JB/T 2462.10-2017 — Modular units for modular machine tools - Part 10: Single-spindle tapping heads - Parameters and dimensions
JB/T 2462.11-1999 — Multi-spindle drilling heads - Parameters and dimensions
JB/T 2462.11-2017 — Modular units for modular machine tools - Part 11: Multi-spindle drilling heads - Parameters and dimensions
JB/T 2462.12-1999 — Multi-spindle tapping units - Parameters and dimensions
JB/T 2462.12-2017 — Modular units for modular machine tools - Part 12: Multi-spindle tapping heads - Parameters and dimensions
JB/T 2462.13-1999 — Circular bases - Dimensions
JB/T 2462.13-2017 — Modular units for modular machine tools - Part 13: Rotary table bases - Dimensions
JB/T 2462.14-1999 — Floor-type centre bases - Dimensions
JB/T 2462.14-2017 — Modular units for modular machine tools - Part 14: Floor-type intermediate bases - Dimensions
JB/T 2462.15-1999 — Side supports (radial type) - Dimensions
JB/T 2462.15-2025 — Modular units for modular machine tools - Part 15: Side support (radial) - Dimensions
JB/T 2462.16-1999 — Polygonal centre bases - Parameters and dimensions
JB/T 2462.16-2025 — Modular units for modular machine tools - Part 16: Polygonal middle column - Parameters and dimensions
JB/T 2462.17-1999 — Bases - Dimensions
JB/T 2462.17-2025 — Modular units for modular machine tools - Part 17: Base - Dimensions
JB/T 2462.18-1999 — Adjustable supports - Dimensions
JB/T 2462.18-2025 — Modular units for modular machine tools - Part 18: Adjustable support - Dimensions
JB/T 2462.19-1999 — Fixed supports - Dimensions
JB/T 2462.19-2025 — Modular units for modular machine tools - Part 19: Anchor support - Dimensions
JB/T 2462.20-1999 — Columns (for long table slides) - Dimensions
JB/T 2462.20-2025 — Modular units for modular machine tools - Part 20: Column (for slide with long table surface) - Dimensions
JB/T 2462.21-1999 — Compound columns - Dimensions
JB/T 2462.21-2025 — Modular units for modular machine tools - Part 21: Combination - Dimensions
JB/T 2462.22-1999 — Pneumatic units - Parameters and dimensions
JB/T 2462.22-2025 — Modular units for modular machine tools - Part 22: Pneumatic power head- Date - Dimensions
JB/T 2462.23-1999 — Adjustable cylindrical supports for pneumatic units - Parameters and dimensions
JB/T 2462.23-2025 — Modular units for modular machine tools - Part 23: Adjustable cylindrical support for pneumatic power head - Parameters and dimension
JB/T 2462.25-1999 — General-purpose units for modular machine tools - Single-spindle milling heads - Dimensions
JB/T 2462.25-2025 — Modular units for modular machine tools - Part 25: Single milling head - Dimensions
JB/T 2462.26-1999 — General-purpose units for modular machine tools - Single-spindle boring and facing heads - Dimensions
JB/T 2462.26-2025 — Modular units for modular machine tools - Part 26: Single boring and face-turning head - Dimensions
JB/T 2462.27-1999 — Facing heads - Dimensions
JB/T 2462.27-2025 — Modular units for modular machine tools - Part 27: Face-turning plate - Dimensions
JB/T 2462.28-1999 — Multi-station moving tables - Dimensions
JB/T 2462.28-2025 — Modular units for modular machine tools - Part 28: Multi-station travelling table - Dimensions
Other editions:
JB/T 2462.24-2025 (later edition)
Standards on related subjects:
JB/T 12396-2015 — Proportional valve solenoids
GB 16454-2008 — Sawing machines for metal cutting -- Safeguarding specifications
JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements
5 Classification and status
Chinese Standard Classification (CCS): J 58
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 2462.24
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2462.24-1999 | General-purpose units for modular machine tools - Single-spindle drilling heads - Dimensions | current edition | Current |
| JB 3195-1983 | General-purpose units for modular machine tools - Single-spindle drilling heads - Dimensions | previous edition | Superseded |
This page sells the current edition, JB/T 2462.24-1999. Earlier editions are listed for reference only.
How to Download JB/T 2462.24-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 2462.25-2025 — Modular units for modular machine tools - Part 25: Single milling head - Dimensions
JB/T 2462.23-1999 — General-purpose units for modular machine tools - Adjustable cylindrical supports for pneumatic units - Parameters and dimensions
JB/T 2462.25-1999 — General-purpose units for modular machine tools - Single-spindle milling heads - Dimensions
Secure payment via Stripe
Payments accepted
JB/T 2462.24-1999
$85.00