JB/T 2627-2008Downstream equipment for plastics pipe extrusion (English PDF)
塑料挤出硬管辅机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2627-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 2627-2008 is the English-translated version of 塑料挤出硬管辅机.
JB/T 2627-2008 is a recommended Chinese machinery industry standard on the downstream, or auxiliary, equipment of plastics pipe extrusion. It gives the terminology, the basic parameters, the technical requirements, the test methods and the inspection rules, and then the provisions for signs, the instruction manual, packaging, transport and storage.
It applies to the forming machinery that is used together with an extruder and turns the extruded melt into rigid plastic pipe. The standard replaces the 1991 edition, JB/T 2627-1991.
In the classification schemes it is entered as G95 on the Chinese side and 83.200 on the international side, under the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 2627-2008
National Standard of the People's Republic of China
- ICS
- 83.200
- Replacing
- JB/T 2627-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 2627-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 2627-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on the downstream, or auxiliary, equipment of plastics pipe extrusion. It gives the terminology, the basic parameters, the technical requirements, the test methods and the inspection rules, and then the provisions for signs, the instruction manual, packaging, transport and storage. It applies to the forming machinery that is used together with an extruder and turns the extruded melt into rigid plastic pipe. The standard replaces the 1991 edition, JB/T 2627-1991. In the classification schemes it is entered as G95 on the Chinese side and 83.200 on the international side, under the Ministry of Industry and Information Technology.
JB/T 2627-2008 falls under ICS 83.200, in the field of rubber and plastics industries.
This catalogue holds 13 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 5226.1-2002
GB/T 6388
GB 9969.1
GB/T 13306
GB/T 13384
GB/T 14436
GB 15558.1-2003 — Buried polyethylene (PE) piping systems for the supply of gaseous fuels - Part 1: Pipes
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 2627-1991 (earlier edition)
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
JB/T 6491-2015 — Counter-rotating twin-screw plastics extruder
JB/T 6490-2015 — Plastics compression moulding presses
JB/T 5418-2015 — Plastics nonwoven textile machine
6 Classification and status
International classification (ICS): 83.200
Chinese Standard Classification (CCS): G 95
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 5226.1-2002Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB 9969.1General principles for preparation of instructions for use of industrial products
- GB/T 13306Plates
Similar standards
Editions of JB/T 2627
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2627-2008 | Downstream equipment for plastics pipe extrusion | current edition | Current |
| JB/T 2627-1991 | Downstream equipment for plastics pipe extrusion | previous edition | Superseded |
This page sells the current edition, JB/T 2627-2008. Earlier editions are listed for reference only.
How to Download JB/T 2627-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 15558.1-2003 — Buried polyethylene (PE) piping systems for the supply of gaseous fuels - Part 1: Pipes
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
JB/T 2627-2008
$105.00