JB/T 2231.2-2013Reciprocating Piston Compressor Part-subassembly - Part 2: Cylinder Diameters (English PDF)
往复活塞压缩机零部件 第2部分：气缸直径
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2231.2-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 2231.2-2013 is the English-translated version of 往复活塞压缩机零部件 第2部分：气缸直径.
JB/T 2231.2-2013 is a recommended Chinese machinery industry standard on parts and subassemblies of reciprocating piston compressors, its second part being given over to cylinder diameters.
It fixes the cylinder diameters for these machines. Its field of application takes in reciprocating piston air compressors and the other reciprocating piston gas compressors.
The standard quotes GB/T 2822-2005. It replaces JB/T 2231.2-1999. It carries Chinese classification J72 and international classification 23.140.
Found what you need?
Document preview — JB/T 2231.2-2013
National Standard of the People's Republic of China
- ICS
- 23.140
- Replacing
- JB/T 2231.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 2231.2-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 2231.2-1999.
It is one of 9 parts of the JB/T 2231 series.
2 Scope
This standard is a recommended Chinese machinery industry standard on parts and subassemblies of reciprocating piston compressors, its second part being given over to cylinder diameters. It fixes the cylinder diameters for these machines. Its field of application takes in reciprocating piston air compressors and the other reciprocating piston gas compressors. The standard quotes GB/T 2822-2005. It replaces JB/T 2231.2-1999. It carries Chinese classification J72 and international classification 23.140.
3 Normative references
JB/T 2231.2-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2822-2005 — Standard linear dimensions
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 2231.1-1999 — Reciprocating piston compressor parts - Part 1: Outside diameters of shafts and pins
JB/T 2231.1-2013 — Part 1: External Diameters of Shaft and Pin
JB/T 2231.3-1999 — Parts and components of reciprocating piston compressors - Part 3: Thin-walled bearing shells
JB/T 2231.3-2011 — Parts of reciprocating piston compressors - Part 3: Thin-walled bearing shells
JB/T 2231.4-1999 — Reciprocating piston compressor parts - Part 4: Ring valve plates
JB/T 2231.4-2013 — Parts of reciprocating piston compressors - Part 4: Metal ring valve plates
JB/T 2231.5-1999 — Reciprocating piston compressor parts - Part 5: Mounting dimensions of valves
JB/T 2231.5-2013 — Part 5: Overall Dimensions for Valve Assembly
Other editions:
JB/T 2231.2-1999 (earlier edition)
6 Classification and status
International classification (ICS): 23.140
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 2231.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2231.2-2013 | Reciprocating Piston Compressor Part-subassembly - Part 2: Cylinder Diameters | current edition | Current |
| JB/T 2231.2-1999 | Reciprocating Piston Compressor Part-subassembly - Part 2: Cylinder Diameters | previous edition | Superseded |
This page sells the current edition, JB/T 2231.2-2013. Earlier editions are listed for reference only.
How to Download JB/T 2231.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2822-2005 — Standard linear dimensions
JB/T 2231.3-2011 — Parts of reciprocating piston compressors - Part 3: Thin-walled bearing shells
JB/T 2231.1-1999 — Reciprocating piston compressor parts - Part 1: Outside diameters of shafts and pins
Secure payment via Stripe
Payments accepted
JB/T 2231.2-2013
$95.00