GB/T 25360-2010The reciprocating piston natural gas compressor for the vehicle gas station (English PDF)
汽车加气站用往复活塞天然气压缩机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25360-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 10, 2010
Implementation date
March 1, 2011
Scope
GB/T 25360-2010 is the English-translated version of 汽车加气站用往复活塞天然气压缩机.
GB/T 25360-2010 is the Chinese standard "The reciprocating piston natural gas compressor for the vehicle gas station".
Its scope clause reads: This standard specifies the car filling stations with natural gas reciprocating piston compressor (hereinafter referred to as compressor) model, the basic parameters, requirements, test Test methods, inspection rules and signs, packaging and storage.
This standard applies to the rated discharge pressure of not more than 25MPa, the driver power less than 400kW compressor. Its clauses include models and basic parameters.
Found what you need?
Document preview — GB/T 25360-2010
National Standard of the People's Republic of China
- ICS
- 23.140
- Classification
- J 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 models and basic parameters
- 3.1 Model
- 3.2 Basic parameters
1 Scope
This standard specifies the car filling stations with natural gas reciprocating piston compressor (hereinafter referred to as compressor) model, the basic parameters, requirements, test
Test methods, inspection rules and signs, packaging and storage.
This standard applies to the rated discharge pressure of not more than 25MPa, the driver power less than 400kW compressor.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 150 steel pressure vessels
GB 151 shell and tube heat exchangers
GB/T 2100 corrosion resistant steel castings for general purposes
GB 3836.1 Electrical apparatus for explosive gas atmospheres - Part 1. General requirements
GB/T 3853-1998 displacement compressors Acceptance Test
GB/T 4980 Determination of volumetric compressor noise
GB/T 5330-2003 industrial woven square hole wire mesh
GB/T 7777 displacement compressors mechanical vibration measurement and evaluation
GB 10892 Stationary air compressors - Safety rules and procedures
GB/T 12241 General requirements for safety valve
GB/T 13306 signs
GB/T 15487 displacement compressor flow measurement method
JB/T 2589 model designation displacement compressors
JB/T 4758 air-cooled heat exchangers
JB/T 6431 displacement compressors Gray iron castings
JB/T 6908 Steel forgings displacement compressors
JB/T 7240 ships with a reciprocating piston air compressor main components of technical conditions
JB/T 7663.1 displacement compressors packaging technology conditions
JB/T 8935 process compressors safety requirements
JB/T 9104 displacement compressor iron castings
Pressure Vessel Safety Technology Supervision
3 models and basic parameters
3.1 Model
Compressor type establishment shall comply with JB/T 2589's.
3.2 Basic parameters
3.2.1
When the compressor rated discharge pressure 25MPa, the public at different volume flow of said suction pressure and equipped with a power driver
Shall comply with the requirements in Table 1. Compressor rated discharge pressure is less than 25MPa, technical implementation of the agreement by both supply and demand.
3.2.2
When the actual flow is greater than the volume specified in Table 1, with a value greater than allowed in Table 1 as the nominal volume flow.
GB/T 13277.1-2023 | GB/T 4976-2017 | GB/T 33625-2017 | GB/T 25359-2023 | GB/T 25358-2010 | GB/T 25357-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 25360-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 25360-2010
$165.00