JB/T 2728.1-2008Gas coolers for electrical machines - Part 1: General rules (English PDF)
电机用气体冷却器 第1部分:一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2728.1-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 16, 2008
Implementation date
December 1, 2008
Scope
JB/T 2728.1-2008 is the English-translated version of 电机用气体冷却器 第1部分:一般规定.
JB/T 2728.1-2008 is the Chinese machinery industry standard covering gas coolers for electrical machines, Part 1: General rules. It was issued on 16 June 2008 and has been in force since 1 December 2008, replacing JB/T 2728.1-1996.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2008 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 2728.1-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 2728.1-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 2728.1-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 June 2008 and has been in force since 1 December 2008.
It replaces the earlier edition JB/T 2728.1-1996.
It is one of 10 parts of the JB/T 2728 series.
2 Scope Preview
JB/T 2728.1-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
2 other standards in this catalogue cite it, among them JB/T 2728.3-2008, JB/T 2728.4-2008.
It is one part of the JB/T 2728 series, of which this catalogue holds 10 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 2728.2-1996 — Technical requirements for wire-wound gas coolers
JB/T 2728.2-2008 — Part 2: Technical requirements for plate-fin gas coolers
JB/T 2728.2-2017 — Part 2: Technical requirements for plate-fin gas coolers
JB/T 2728.3-1996 — Technical requirements for wound-fin gas coolers
JB/T 2728.3-2008 — Part 3: Technical requirements for extruded-fin gas coolers
JB/T 2728.4-1996 — Technical requirements for extruded-fin gas coolers
JB/T 2728.4-2008 — Part 4: Technical requirements for wound-fin gas coolers
JB/T 2728.5-1996 — Technical requirements for threaded-fin gas coolers
JB/T 2728.5-2008 — Part 5: Technical requirements for wire-wound gas coolers
Other editions:
JB/T 2728.1-2017 (later edition)
JB/T 2728.1-1996 (earlier edition)
Standards on related subjects:
GB/T 997-2022 — Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
GB/T 1971-2021 — Rotating electrical machines - Terminal markings and direction of rotation
JB/T 9615.1-2000 — Test methods for interturn insulation of random-wound windings of low-voltage AC machines
6 Classification and status
Chinese Standard Classification (CCS): K 20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 2728.2-2017Gas coolers for electrical machines - Part 2: Technical requirements for plate-fin gas coolers
- JB/T 8667.2-2013Technical specifications for large three-phase synchronous motors - Part 2: TL series
- JB/T 8992-2013The air-water cooling device with knapsack for AC and DC motors
- JB/T 8668-2011Technical requirements for large three-phase vertical induction motors
- JB/T 2728.3-2008Gas coolers for electrical machines - Part 3: Technical requirements for extruded-fin gas coolers
- JB/T 2728.4-2008Gas coolers for electrical machines - Part 4: Technical requirements for wound-fin gas coolers
Similar standards
Editions of JB/T 2728.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2728.1-2008 | Gas coolers for electrical machines - Part 1: General rules | current edition | Current |
| JB/T 2728.1-1996 | Gas coolers for electrical machines - Part 1: General rules | previous edition | Superseded |
This page sells the current edition, JB/T 2728.1-2008. Earlier editions are listed for reference only.
How to Download JB/T 2728.1-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 2728.2-2017 — Gas coolers for electrical machines - Part 2: Technical requirements for plate-fin gas coolers
JB/T 2728.2-2008 — Gas coolers for electrical machines - Part 2: Technical requirements for plate-fin gas coolers
JB/T 2728.2-1996 — Gas coolers for electrical machines - Technical requirements for wire-wound gas coolers
JB/T 2728.1-2008
$319.00